Power Supply
• Do not share the power supply with other
electronics that can produce cable statics, for
example, electric motors.
• It is normal for direct current (DC) to produce
heat with extended usage, and there is no need
to be worried.
• Before connecting the module to other
electronics, always turn off the power to prevent
damage.
Placement/Location
• Operating the module near a post-amplifier or
machines that use High-power converters, buzzing
may result. To prevent this problem, please
change the module’s facing direction, or place the
machine away from the interrupting sources.
• This machine may interfere with the radios and
televisions. Please do not operate the module
near them.
• Do not place the module under sun, or near any
heat source, as high temperature may cause the
module or components to deform or discolor.
• To prevent permanent damage, please do not
expose the module or components to moist or in
humid environments.
Maintenance
• For normal cleaning, please use soft cloth with
little or no moist for wiping. For tougher spots, use
neutral-pH and wear-free cleaner then use dry soft
cloth to wipe clean.
• Never use volatile oil, diluting solutions, alcohol,
or any other kinds of solvents to prevent the
machine from deforming or discoloring.
Additional Precautions
• During operation, please handle with care to
prevent any damage. Do not hit or press against
the display screen.
• Always grab the heads of cables during in-
sertion/removal to prevent damage to the cables
or the machine.
• To prevent disturbing your neighbors, please
operate the machine at an acceptable volume, or
use a headphone, especially at night.
• Although this electronic drum set is designed to
minimize unwanted noise during operation, the
percussive sound may still pass through the floor
or walls, resulting in unexpected noise.Please be
careful not to let such sound disturb your neighbors,
especially at night.
• When transporting, please use the original or
similar packaging and box.
• Please use official cables for connection. When
using cables from other companies, please note
the following:Some cables may consist of resistors,
which may be incompatible and result in extremely
low volume. For information about the specifications
of cables, please consult with the manufacturer.
• Please do not hit the pads with excessive force to
prevent the risk of hurting your fingers.
Precautions
Please read the following precautions aside from the safety in-
structions
5
