Deditec Fan-Control-2 Bedienungsanleitung

Hardware-Description

September

Fan-Control-2

2021

INDEX

Index | 2Seite

1. Introduction 4

1.1. Foreword 4

1.2. Customer satisfaction 4

1.3. Customer response 5

2. Hardware Description 7

2.1. Description 7

2.2. Technical data 8

2.3. Ping assignment 9

2.3.1. Pin assignment plug connector FAN1/FAN2

2.3.2. Pin assignment plug connector PWR

2.3.3. Pin assignment plug connector LED

2.4. Configuration of the device 12

2.5. LED outputs (connection via plug connector) 14

2.6. Switching outputs FAN1_OK and FAN2_OK at plug connector PWR 14

3. Appendix 16

3.1. Revisionen 16

Introduction |Seite 3

Introduction

Introduction |Seite 4

1. Introduction

1.1. Foreword

First of all, we would like to congratulate you to the purchase of a

high quality DEDITEC product.

Our products are being developed by our engineers according to

quality requirements of high standard. Already during design and

development we take care that our products have -besides

quality- a long availability and an optimal flexibility.

Modular design

The modular design of our products reduces the time and the

cost of development. Therefor we can offer you high quality

products at a competitive price.

We ensure a long delivery availability!

If semiconductors are no longer available, we can react faster.

With us, usually only modules have to be redesigned and not the

entire product. This increases the delivery availability.

1.2. Customer satisfaction

Our philosophy: a content customer will come again. Therefor

customer satisfaction is in first place for us.

If by any chance, you are not content with the performance of our

product, please contact us by phone or mail immediately.

We take care of the problem!

Introduction |Seite 5

1.3. Customer response

Our best products are co-developments together with our

customers. Therefor we are thankful for comments and

suggestions.

Hardware Description |Seite 6

Hardware Description

Hardware Description |Seite 7

2. Hardware Description

2.1. Description

This device is suitable for monitoring the speed of two DC fans.

The tachometer signal of the fans is monitored and evaluated. If

a minimum speed is not reached, e.g. due to dirt or motor

standstill, an externally evaluable signal is output. In addition, the

fan status can be signalled via an LED output.

The module also generates a motor speed voltage. This can be

switched from 1V ... 8V with a potentiometer and is used to set

the maximum rotational speed of both fans.

Hardware Description |Seite 8

2.2. Technical data

Controller for 2 DC fans

Power supply: 12V-30V DC (with reverse polarity protection)

adjustable working resistance: 1K, 2K2, 4K7 or 10K

maximum fan speed adjustable via potentiometer: 1V-8V

Output

2x signal output for fan status: 12V-30V DC / max. 10mA

2x LED output for fan status: max. 5mA

2x speedo input

Plug-in screw terminals for connection wiring

Operating temperature: +10°C..+50°C

DIN rail mounting

Dimensions: 92mm x 100mm x 23mm (L x W x H)

Software adaptations optionally possible

Hardware Description |Seite 9

2.3. Ping assignment

2.3.1. Pin assignment plug connector FAN1/FAN2

Bedeutung

Speed_Out (1V-8V)

TACHO

GND (Ausgang für Lüfter)

Vout (Ausgang für Lüfter)

Hardware Description |Seite 10

2.3.2. Pin assignment plug connector PWR

Bedeutung

FAN2_OK (Vin / 0V)

FAN1_OK (Vin / 0V)

GND (Eingang vom Netzteil)

Vin (Eingang vom Netzteil)

Inhaltsverzeichnis

Andere Deditec Mikrocontroller Handbücher

Deditec

Deditec USB-RS232-TTL-STICK Leitfaden

Beliebte Mikrocontroller Handbücher anderer Marken

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Bedienungsanleitung