Defender Security 82-20520 Bedienungsanleitung

4.3" AHD 1080p CCTV Test Monitor

Owner’s Manual

82-20520

Warning:

☆Avoid exposing this product to moisture.

☆Follow all operating guidelines in accordance with

this to avoid potential permanent damage to the

product.

Caution:

Common notice

◎Do not disassemble this device by yourself. Please

contact supplier for repair service.

Protection against moisture

◎This product is not waterproof. Please avoid any

contact with liquid, and keep the product stored in a

dry environment.

Temperature caution

1. Do not place this product near a high heat source.

High temperature might cause damage to this product,

or personal injury.

2. Operate in temperatures between 0~60°C.

3. Immediate change of temperature can cause damage

to this product. Do not shift product from low

temperatures to high temperatures quickly;

User Caution

◎Before using this product, please read instructions and

check the recharge operation.

Features:

◎Facilitates direct, hands-free connections to AHD 1080p,

AHD 720p and 960H (CVBS) cameras for field focusing, audio

testing and Cat5/6 cable testing.

◎Breakout cable with video input, audio input, and DC12V

output.

◎Standard color bar generator test function.

◎Convenient fold-able design for wrist-mount, or

picture-frame stand viewing position.

◎Built-in lithium battery (6hr recharge; 7hr operation)

Applications :

☆Camera quality inspecting, image correction, network

cable testing, inspection and repair of system circuit, etc…

Accessories:

Standard accessories

(Pictures only for reference. Accessories based on actual

product received.)

Power socket, Video input/output, audio input line

AC/DC Adapter (1A/5V)

Network line

Introduction:

◎Portability

This product’s compact design eliminates the need for

complicated equipment that hinders inspection and

repair.

◎Monitor

4.3″high resolution monitor shows clear images.

◎Long run time

Equipped with a high charge Lithium battery offering 7

working hours with a 6 hour recharge time.

◎Design

Hand-held design for portability and easy operation.

◎DC power output for cameras

Power your camera through the DC output to adjust the

angles and focus as you go.

◎Network line test function

Function Key Guide

1．4.3”TFT LCD

2. When charging, this indicator light will glow

red.

3. When powered on this indicator light will glow

green.

4. Press Function menu button to open or close

the settings menu.

5-6：Open function menu, press these buttons to adjust

the brightness, contrast in color saturation, volume

and language selection.

7. Select a screen ratio of 16:9 or 4:3

8.Lighting switch.

9. 5V power input AC / DC adapter, DC5V 1.0A.

10.Power switch.

11.Camera 12V power,video,audio output

12.Reset switch

13. LED work light

14. LAN Port

15.Foldable stand

Rechargeable Battery Operation:

Rechargeable battery warning:

Please do not attempt to change or disassemble the

rechargeable battery included with your field view camera

tester.

Charging the Tester:

1. Place the AC adaptor plug into the AC mains power socket.

2. Place the DC barrel plug into tester DC input power socket.

3. The red LED light will illuminate while the tester is

recharging.

4. When the red light is off, it means the tester is fully

charged.

Note:

1. Please recharge 6-8 hours during first time use.

2. This product must be switched “off”when recharging.

Specification:

Mainframe

Display

4.3"TFT Color LCD

Number of Pixel

480RGB(H)X272(V)

Video In

Video In × 1 (BNC connector)

Export

7 kinds of color bar signal output

DC power out × 1

(Support CCD camera of power source/

Max electric currency 500mA)

System

Format

NTSC / PAL

Light instruction

2 LED

(Power IND = Green / Charging IND =Red)

Battery

Specification

Built-in rechargeable Lithium battery : 3.7V

2600mA/h

Power

Specification

External power :DC 5V 1.0A Adapter

Dimension/

Weight

178mm (L) x110mm (W) x 40mm(H) / 350g

Question :

Question: Device will not power-on?:

1.Check battery power capability.

2.Check to see if you’re using the original manufactured AC power

adapter.

3.If a DMM is available, test the AC power adapter for proper voltage

output.

Question: Why can't the image function properly?

1.Check if the camera connects correctly with the terminal on the

mainframe.

2.Check if the power is on or off.

3.Check power levels. Please recharge if the power has run out.

Inhaltsverzeichnis

Andere Defender Security Sicherheitssystem Handbücher

Defender Security

Defender Security Mini Alarm MA-20 Bedienungsanleitung

Defender Security

Defender Security 15-2400AKS Bedienungsanleitung

Defender Security

Defender Security DFR-5MP-XBR4V2-BB Bedienungsanleitung

Defender Security

Defender Security FOOTBALL ALARM Bedienungsanleitung

Defender Security

Defender Security 82-20515 Bedienungsanleitung

Defender Security

Defender Security 812BF Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung