Defender EL00194 Bedienungsanleitung

PIR Sensor &

LED Light

Introduction

The Defender PIR Alarm with Key Fob is a simple, user-friendly indoor alarm unit, perfect for

installing in important rooms or access locations. Armed and operated using either the key fob or

the buttons on the side of the alarm, the device produces a 130dBs siren whenever the

8m PIR sensor is breached. The alarm is battery operated and requires 2 x AA batteries, which are

included.

Contents

• 1 x PIR Alarm Unit

• 1 x Key Fob

• 1 x Mounting Bracket

• 1 x Adhesive Pad

• 2 x Fixing screws and wall plugs

• 2 x AA & 1 x CR2032 Batteries

Battery Installation

Please note: the PIR Alarm and Key Fob come with batteries installed, please remove battery tab

before ﬁrst use. The battery compartment is accessed from the rear of the alarm unit by remov-

ing the battery cover. Insert 2 x AA batteries (included) noting the correct polarity. The unit will

beep once to indicate the batteries are installed correctly. The unit is now ON. The LED light will

illuminate when the batteries need replacing in the alarm unit. To replace the batteries, repeat the

steps above.

NOTE: The battery compartment contains an anti-tamper function, meaning the alarm will sound

when the battery cover is removed even if the alarm is disarmed. To change the batteries or

access the compartment, ﬁrst turn the unit OFF by long pressing the Set button, until the alarm

beeps ﬁve times. The unit is now OFF and the batteries can be accessed.

The remote fob uses 1 x CR2032 battery. To replace, unscrew the screw at the base of the fob to

and open the fob. Replace the battery, noting the correct polarity.

Operating the Alarm Unit

To turn the unit ON, press and hold the Set button until the unit beeps once.

Note: when installing batteries, the unit will auto switch ON after the batteries are inserted.

To turn the unit OFF, long press and hold the Set button until the unit beeps ﬁve times.

To arm the alarm press the Set button once and the unit will beep once for arm.

To disarm the alarm press the Set button once and the unit will beep twice for disarm.

Press the Tone button to select the desired alarm tone. Each tone will sound brieﬂy (six in total) as

you press. When you hear your preferred tone, simply stop pressing and it will auto save.

Press the Volume button to select the desired sound level (ﬁve in total). It will auto save as above.

PIR ALARM WITH KEY FOB

Motion Activated Household Alarm Product Code: EL00194

defendersecurityproducts.co.uk

Siren Volume Button

Set Button

Tone Button

ArmDisarm

Home SOS

Adding and Removing Fobs

Press and hold the Volume button on the unit until the LED light comes on. When the light

comes on, press any button on the fob.

Two beeps means the fob has been paired successfully.

One beep means the fob has already been paired to the unit.

Three beeps means the unit cannot be paired with any more fobs (max 20 per unit).

To remove all fobs linked with the unit, press and hold the Tone button until the LED light

comes on. Then press and hold the Tone button again until the unit beeps four times.

Operating the Alarm with the Fob

As long as the unit is ON, it can be armed and disarmed using the fob.

To arm the alarm, press the Arm button on the fob. The unit will beep and ﬂash once.

To disarm the alarm, press the Disarm button on the fob. The unit will beep and ﬂash twice.

To activate the alarm instantly in an emergency, press the SOS button. The siren will sound,

regardless of the alarm being armed or disarmed.

To alter the alarm tone, press the Home button on the fob once. Each tone will play as you

press, simply stop on your preferred sound.

Installation

The diverse accessories included with the kit means the alarm can either be installed hanging

from a ceiling, ﬁxed to a wall, or free standing. INDOOR USE ONLY

To mount, ﬁrst ax the ball mount into the rear of the alarm.

WALL: Mark and screw the mount to the wall through the two guide holes.

Insert the ball mount axed to the unit into the gap and secure.

CEILING: Mark and screw the mount to the ceiling through the two guide

holes. Insert the curved link piece into the mount by pressing the

ball into the socket on the mount. Then press the ball mount

axed to the unit into the socket on the link piece and secure.

Adjust as needed.

To have the alarm free standing, follow the steps in Ceiling but use the

mounting bracket as a base on the ﬂat surface of your choice.

You can also use the adhesive pad to install the alarm. Simply ax

one side of the pad to the rear of the battery compartment and ﬁx

to your desired location.

NOTE: When installing or moving the alarm, always ensure the alarm is set

to OFF, to avoid false alarms or triggering the anti-tamper on the battery compartment.

Defender Security Products

Unit 40

Manor Industrial Estate

Flint, Flintshire

CH6 5UY

Your Safety is Our Expertise

Inhaltsverzeichnis

Andere Defender Sicherheitssystem Handbücher

Defender

Defender Cooper Torch Bedienungsanleitung

Defender

Defender AL00005 Bedienungsanleitung

Defender

Defender AL00004 Bedienungsanleitung

Defender

Defender 3.0 Voice Plus Bedienungsanleitung

Defender

Defender PHOENIXM2 Bedienungsanleitung

Defender

Defender SN502-4CH Bedienungsanleitung

Defender

Defender SN502-4CH Bedienungsanleitung

Defender

Defender Phoenix 3.5" Digital Wireless Security Video... Bedienungsanleitung

Defender

Defender PHOENIX1 Bedienungsanleitung

Defender

Defender MKA TORCH Bedienungsanleitung

Defender

Defender PX301 Bedienungsanleitung

Defender

Defender EL00001 Bedienungsanleitung

Defender

Defender MINIMAX AL00010 Bedienungsanleitung

Defender

Defender EL00017 Bedienungsanleitung

Defender

Defender EL00174 Bedienungsanleitung

Defender

Defender WHDREC Bedienungsanleitung

Defender

Defender SN502-4CH Bedienungsanleitung

Defender

Defender DX-500 SOLAR Bedienungsanleitung

Defender

Defender AL00009 Bedienungsanleitung

Defender

Defender 4K1T4B4 Bedienungsanleitung

Defender

Defender PHOENIX Bedienungsanleitung

Defender

Defender 2K Bedienungsanleitung

Defender

Defender SN500-4CH Bedienungsanleitung

Defender

Defender SENTINEL 3 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung