Definitive Technology DI 5.5BPS Bedienungsanleitung

Unpacking Your Di 5.5BPS Speakers

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed

damage most likely occurred in handling after it left our plant and should be reported

at once to your Definitive dealer or the deliverycompany that delivered your loud-

speaker. Please unpack your system carefully. Save all cartons and packing materials

in case you move or need to ship your system. Recordthe serial number found on

the back of the speakers, and on the carton, in this manual and save it for future

reference should your speaker need service. For your best protection, register your

Di 5.5BPS speakers on-line at http://registration.definitivetech.com.

13-5/8" (34.6 cm)

7-3/4" (19.74 cm)

6-13/16" (17.4 cm)

12-5/8" (32.2 cm)

3-7/8" (9.7 cm)

3-3/8" (8.42 cm)

2 @ 5-1/4" (13.3 cm)

2 @ 1" (25 mm)

8.4 lb. (3.76 kg)

28 Hz – 30 kHz

89 dB

Compatible with 4 – 8 Ohm outputs.

10 – 225 Watts Per Channel

Definitive Technology

Di 5.5BPS

OWNER’S MANUAL

Thank You

Thank you for choosing the Definitive Technology Disappearing In-Wall loud

speaker.The Di Series products offer extraordinary sound quality from speakers that

are barely visible when installed in a wall or ceiling. Our engineers spent many

years developing this product. In order to ensure that you experience the finest per

formance possible, we encourage you to take a moment to fully read this owner’s

manual and familiarize yourself with the proper installation and set-up procedures

for your Di 5.5BPS speaker.

Grille Length

Grille Width

Cutout Width

Cutout Length

Total Depth *

Mounting Depth In-Wall **

Woofer

Tweeter

Product Weight

Frequency Response

Sensitivity

Impedance

Recommended Amp Power

*From back of mounting flange to deepest part of product

** Total depth when product installed in 1/2" (12.7 mm) thick material

Specifications

Di 5.5BPS

Painting Di 5.5BPS Speakers

Your Di 5.5BPS speakers may be painted to match the color of the wall

or ceiling in which they are installed. Failureto follow the following

painting instructions may result in seriously degraded sound quality.

It is your responsibility to make sure your painting contractor sees and

follows these instructions.

1. DO NOT PAINT THE GRILLE WITH A BRUSH OR ROLLER —

they will clog the fine mesh of the grille and cloth scrim and result

in poor sound quality.

2. Remove the grille from the speaker and place it on a drop cloth,

newspaper or plastic sheet.

3. The grille MUST be spray painted with one of the following:

•Spray paint that closely matches the desired finish/color

• A custom spray bomb, color matched to your paint finish

•Indoor latex paint using a spray gun (paint must be diluted

to the paint manufacturer’s specifications)

4. Removing the backing cloth (scrim) is not required.

5. Paint should be applied in a series of thin coats sprayed at

approximately 60 degrees from the grille surface, allowing each

coat to fully curebeforeapplying additional coats.

6. To ensure that the paint distribution is evenly applied, each coat

should be applied from at least 4 different directions to the grille.

(N, S, E & W) This will ensure an even coverage on the grille.

7. Once the grille has been painted and the paint has fully cured, you

may use a brush, or small roller to touch-up the outer edge of the

grille frame — being VERYcareful not to get any additional paint

on the grille mesh surface.

Optional Fire-Rated Enclosures

Definitive Di Series speakers have been designed to meet UL 1480 and

2043 standards when used with the appropriate optional Definitive

fire-rated enclosures. All plastic parts used in the speakers are V0 flame

rated as per UL 94.

While these enclosures are necessary in most countries for commercial

and multi-family dwelling installations, residential customers may want

to use them for added safety and/or to reduce the sound from “leaking”

into adjacent rooms.

Placement Options

Placement choice for your in-wall speakers bears careful consideration, as

installation requires that you cut a hole in your wall or ceiling! The Di BPS is

abipolar speaker intended to produce a diffuse and non-localizable surround

effect. As such its placement is very different than front channel speakers.

They may be placed in the ceiling or wall. Keep the speakers at least 2 feet

(61cm) from side walls. When mounting the speakers in walls, they should

be positioned at least 6 feet (2 meters) high. See the illustrations for specific

placement guidelines. Definitive Di 5.5BPS Loudspeakers have aimable

tweeters that allow you to focus their sound towardor away from your

listening area depending on the application.

Definitive Technology

5.1 channel – in-ceiling

≥2’

(61 cm)

≥2’

(61 cm)

5.1 channel – in-wall

≥2’

(61 cm)

≥2’

(61 cm)

option 1

option 2

5.1 Channel Installations

Di 5.5BPS

OWNER’S MANUAL

6.1 channel – in-ceiling

≥2’

(61 cm)

≥2’

(61 cm)

7.1 channel – in-ceiling

≥2’

(61 cm)

≥2’

(61 cm)

≥2’

(61 cm)

≥2’

(61 cm)

6.1 channel – in-wall

7.1 channel – in-wall

≥2’

(61 cm)

≥2’

(61 cm)

6.1 Channel Installations 7.1 Channel Installations

Di 5.5BPS

OWNER’S MANUAL

Aiming the Tweeter

Toaim the tweeter, first install the speaker in the desired location. Rotate

the tweeter so that the arrow on the tweeter faceplate is pointing in the

direction you wish to aim the tweeter [figure 5] then gently push the

tweeter in that direction [figure 6a & 6b]. For rear/surround speakers aim

the tweeter toward the nearest reflecting surface (an adjacent wall or

ceiling) for a more diffuse sound field (if you so desire; for more direct

sound, aim the tweeters at your listening position).

Environmental EQ

If your listening room is very reflective, with smooth sheetrock walls,

hardwood floors, and non-cushioned furniture, the sound will be overly

“bright” and unnatural. Engaging the Environmental EQ feature

[figure 7] (by selecting the “–” setting) compensates for the effect of

overly loud treble. If your room is has a lot of absorbing surfaces such as

over-stuffed furniture, heavy drapes and rugs such that the speakers

sound “dull,” engage the “+” setting to boost treble response. Leave the

switch in the center position in rooms with a balance of reflecting and

absorbing surfaces (most rooms fall into this category).

Installation

Installation Cautions

Installation of Disappearing 5.5BPS Loudspeakers requires skills in using

tools such as a drill, screwdriver, saws and power tools. Installation also

entails running wires through walls. You should have a thorough under

standing of local building and fire codes and a familiarity with the area

behind the wall or ceiling into which you plan to install your speakers.

When cutting holes in and running wires through walls/ceilings you run

the risk of cutting electrical wires or water pipes thereby causing safety

hazards and property damage. If you are in any doubt that you possess

the necessary skills or tools, contact your Definitive Technology dealer,

general contractor or a professional installer.

Required Tools

•Pencil for marking the location of installation.

•Bubble level

•Keyhole saw,utility knife or material- appropriate incising implement

for cutting drywall or other wall material.

•Phillips head screwdriver.

•Power drill with appropriate bit (optional, for starting wall cut).

Installation Procedure

•You must first install speaker wires that meet appropriate building and

fire codes before installing the speakers. Use at least 18 gauge wire or

heavier to ensure optimum sound quality.

Figure 7

Figure 5

Point tweeter in desired

direction by turning the

tweeter assembly.

Figure6a

Push gently in

direction of arrow

to set angle.

Figure 6b

• Make sure the material into which you plan to mount the speakers

(plaster, drywall, paneling, stone, etc.) can support the weight of

the speakers (see specification page for the weight of your model).

•Make sure the locations you select do not conceal studs, electrical

wiring or plumbing. Prior to installation, hold the speaker with

grille on in your chosen location to make sure it safely clears

obstacles such as studs, corners, beams, lighting fixtures and

door/window frames. Your cutout must be at least 2" (50 mm)

from adjoining walls or ceiling, internal studs or plumbing.

•Using the supplied template, trace the installation location with a

pencil. You can do this by holding the template in your preferred

location and tracing around it. Use a bubble level to square and

level the template. [figure 8]

•Carefully cut the hole with the appropriate cutting tool for your

wall or ceiling material. Start the hole by drilling a hole on the

inside of the tracing (with the drill bit just inside the line). Use

this hole to insertthe saw or knife and begin cutting [figure9].

•Once you have cut the hole, pull the speaker wireout of the hole

and connect the speaker. Strip 1/2"(12 mm) of insulation from each

of the two conductors of the wire to expose the bare metal and

twist each of the conductors into a single unfrayed strand. Note

that one of the terminals on the rear of each speaker is marked red

(+) and the other black (-). Make certain that you connect the wire

from the red terminal (+) of your amplifier or receiver to the red

terminal (+) on your speaker and the wirefrom the black terminal

(-) of your amplifier or receiver to the black terminal (-) on your

speaker.Most wirehas some indicator (such as color-coding,

ribbing or writing) on one of the two conductors to help you

maintain consistency [figure 10].

Definitive Technology

AMPLIFIER OR

RECEIVER

Figure 8

Figure 10

Figure 9

Template

–

•Push down on the top of the terminal to reveal the wire hole in the

side of the terminal post and insert the wire into the hole [figure 11].

Release the pressure on the terminal to secure the wire.

Figure11

Definitive Technology

• Loosen the rotating lock arms by turning the lock arm screws on

the front of the speaker counter clockwise [figure 12]. Make sure

that the rotating lock arms are flipped inwards [figure 13] so that

your speaker fits into your cutout.

•Place the speaker carefully into the cutout. If you have a level, use it

to help you correctly align rectangular speaker models. Tighten the

lock arm screws with a screwdriver [figure 14]. This will rotate the lock

arms [figure 15] and secure the speaker to the wall/ceiling. Do not

over-tighten the lock arm screws. If you are using a powered screw

driver or drill set the torque to a value of 7 in. – lb. (8dN – m)

•Install the grille on the speaker frame. Powerful magnets hold the

grille in place.

Lock arm

screws.

Turn counter

clockwise

to loosen.

Lock arm

screws.

Turn clock-

wise to

tighten lock

arms and

secure speaker

to surface.

Figure12

Figure 14

Lock arms

tucked

in prior

to installing

speaker

in wall.

Figure13

Figure 15

–

Di 5.5BPS

OWNER’S MANUAL

SAFETY FIRST

When installing your Di 5.5BPS Loudspeakers, be aware of the weight

of your particular model (see specification page for the weight

of your model) and the sturdiness of the material into which you are

installing the speaker. Also be aware of any concealed studs, electrical

wiring or plumbing in the wall or ceiling into which you are installing

the speakers. If you are not sure of a safe way to install these speakers,

consult a professional installer, your authorized Definitive Technology

dealer, or a building contractor.

Technical Assistance

It is our pleasure to offer assistance if you have any questions regarding

your Definitive loudspeakers. Please contact your nearest Definitive

Technology dealer or call us directly at (800) 228-7148 (US & Canada),

01 (410) 363-7148 (all other countries) or e-mail

[email protected].

Service

Service work on your Definitive loudspeakers will normally be performed

by your local Definitive Technology dealer.If your dealer is unable or

unwilling to performservice contact us for alternative options. Please

note that the address given in this manual is the address of our offices

only.Under no circumstances should loudspeakers be shipped

to our offices or returned without contacting us first and

obtaining returnauthorization.

Definitive Technology Offices

11433 Cronridge Drive

Owings Mills, Maryland 21117

Phone: (800) 228-7148 (US & Canada),

01 (410) 363-7148 (all other countries)

WARNING: LISTEN CAREFULLY

Definitive Technology loudspeakers and subwoofers are capable of

playing at extremely high volume levels, which could cause serious or

permanent hearing damage. Definitive Technology accepts no liability

for hearing loss, bodily injuryor property damage resulting from the

misuse of its products.

You should limit prolonged exposureto volumes that exceed

85 decibels (dB).

For more about safe volume levels refer to the Occupational

Health and Safety Administration (OSHA) guidelines at:

www.osha.gov/dts/osta/otm/noise/standards_more.html.

NOTES

DEI Sales Co., dba Definitive Technology (herein “Definitive”) warrants to the original

retail purchaser only that this Definitive loudspeaker product (the “Product”) will be free

from defects in material and workmanship for a period of five (5) years covering the

drivers and cabinets, and three (3) years for the electronic components from the date of

the original purchase from a Definitive Authorized Dealer. If the Product is defective in

material or workmanship, Definitive or its Authorized Dealer will, at its option, repair

or replace the warranted product at no additional charge, except as set forth below. All

replaced parts and Product(s) become the property of Definitive. Product that is repaired

or replaced under this warranty will be returned to you, within a reasonable time, freight

collect. This warranty is non-transferrable and is automatically void if the original

purchaser sells or otherwise transfers the Product to any other party.

This Warranty does not include service or parts to repair damage caused by accident,

misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use,

voltage in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not

directly attributable to defects in material or workmanship. This warranty does not cover

the elimination of externally generated static or noise, or the correction of antenna

problems or weak reception. This warranty does not cover labor costs or damage to the

Product caused by installation or removal of the Product. Definitive Technology makes no

warranty with respect to its products purchased from dealers or outlets other than

Definitive Technology Authorized Dealer.

THE WARRANTY IS AUTOMATICALLY VOID IF:

1) The product has been damaged, altered in any way, mishandled during transportation,

or tampered with.

2) The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse,

customer applied cleaners, failure to observe manufacturers warnings, neglect or

related events.

3) Repair or modification of the Product has not been made or authorized by Definitive

Technology.

4) The product has been improperly installed or used.

Product must be returned (insured and prepaid), together with the original dated proof of

purchase to the Authorized Dealer from whom the Product was purchased, or to the

nearest Definitive factory service center. Product must be shipped in the original shipping

container or its equivalent. Definitive is not responsible or liable for loss or damage to

Product in transit.

THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT

APPLIES TO YOUR PRODUCT. DEFINITIVE NEITHER ASSUMES NOR

AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY OTHER

OBLIGATION OR LIABILITY IN CONNECTION WITH YOUR PRODUCT OR THIS

WARRANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO

EXPRESS, IMPLIED,WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED TO

THE MAXIMUM EXTENT ALLOWED BY LAW. ALL IMPLIED WARRANTIES ON

PRODUCT ARE LIMITED TO THE DURATION OF THIS EXPRESSED

WARRANTY. DEFINITIVE HAS NO LIABILITY FOR ACTS OF THIRD PARTIES.

DEFINITIVE’S LIABILITY, WHETHER BASED ON CONTRACT, TORT, STRICT

LIABILITY, OR ANY OTHER THEORY, SHALL NOT EXCEED THE PURCHASE

PRICE OF THE PRODUCT FOR WHICH A CLAIM HAS BEEN MADE. UNDER NO

CIRCUMSTANCE WILL DEFINITIVE BEAR ANY LIABILITY FOR INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES. THE CONSUMER AGREES AND

CONSENTS THATALL DISPUTES BETWEEN THE CONSUMER AND

DEFINITIVE SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA

LAWS IN SAN DIEGO COUNTY, CALIFORNIA. DEFINITIVE RESERVES THE

RIGHT TO MODIFY THIS WARRANTY STATEMENT AT ANY TIME.

Some states do not allow the exclusion or limitation of consequential or incidental

damages, or implied warranties, so the above limitations may not apply to you. This

warranty gives you specific legal rights, and you may also have other rights which vary

from state to state.

LIMITED USA WARRANTY

5-YEARS FOR DRIVERS AND CABINETS, 3-YEARS FOR ELECTRONIC COMPONENTS

This product complies with the essential requirements of the EMC directive 89/336/EEC.

EZAT020209

Di 5.5BPS

OWNER’S MANUAL

For more information on Definitive Technology Loudspeakers and accessories,

visit www.definitivetech.com, or email [email protected].

Definitive Technology, Owings Mills, Maryland, USA. 800-228-7148

Di 3.5R Di 4.5R Di 5.5R

Di 5.5S

Di 6.5R

Di 6.5S

Di 6.5STR Di 8R

Other Disappearing In-Wall Series Speakers

Andere Handbücher für DI 5.5BPS

Inhaltsverzeichnis

Andere Definitive Technology Sprecher Handbücher

Definitive Technology

Definitive Technology SoloCinemo XTR Bedienungsanleitung

Definitive Technology

Definitive Technology DEMAND SERIES Bedienungsanleitung

Definitive Technology

Definitive Technology UIW RCS II Bedienungsanleitung

Definitive Technology

Definitive Technology UIW RLS II Bedienungsanleitung

Definitive Technology

Definitive Technology PowerMonitor 500 Handbuch

Definitive Technology

Definitive Technology UIW RLS II Bedienungsanleitung

Definitive Technology

Definitive Technology DI 5.5BPS Bedienungsanleitung

Definitive Technology

Definitive Technology BP9000 SERIES Bedienungsanleitung

Definitive Technology

Definitive Technology BP9000 SERIES Bedienungsanleitung

Definitive Technology

Definitive Technology DYMENSION DM20 Bedienungsanleitung

Definitive Technology

Definitive Technology 3.5R Bedienungsanleitung

Definitive Technology

Definitive Technology cube Bedienungsanleitung

Definitive Technology

Definitive Technology Mythos Gem Bedienungsanleitung

Definitive Technology

Definitive Technology StudioSlim Bedienungsanleitung

Definitive Technology

Definitive Technology 3.5R Bedienungsanleitung

Definitive Technology

Definitive Technology Mythos Nine Bedienungsanleitung

Definitive Technology

Definitive Technology BP 8B Bedienungsanleitung

Definitive Technology

Definitive Technology Bipolar SuperTower BP7002 Bedienungsanleitung

Definitive Technology

Definitive Technology SuperTower BP7000SC Technisches Dokument

Definitive Technology

Definitive Technology Mythos Solo Service-Handbuch

Definitive Technology

Definitive Technology Mythos Solo Surround Array SSA-42 Bedienungsanleitung

Definitive Technology

Definitive Technology Mythos Mythos STS Bedienungsanleitung

Definitive Technology

Definitive Technology Mythos Ten Bedienungsanleitung

Definitive Technology

Definitive Technology Mythos Five Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung