Dell Dimension 900 Bedienungsanleitung

www.dell.com

support.dell.com

Dell™ Dimension™ 900 System

REFERENCE AND

TROUBLESHOOTING GUIDE

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Dell Precision, DellWare,Inspiron, Latitude, OptiPlex, and Dimension are trademarks

of Dell Computer Corporation; Intel and Pentium are registered trademarks and Celeron and MMX are trademarks of Intel Corporation;

MS-DOS, Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their

products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.

March 2001 P/N 4870V Rev. A05

Safety Instructions

Use the following safety guidelines to help protect your computer system from poten-

tial damage and to ensure your own personal safety.

NOTICE: Your computer is designed to work only while upright in the stand

shipped with it. Do not attempt to place the computer flat on a desktop,

and do not set heavy objects, such as a monitor, on top of the computer.

When Using Your Computer System

As you use your computer system, observe the following safety guidelines.

CAUTION: Do not operate your computer system with any cover(s) (includ-

ing computer covers, bezels, filler brackets, front-panel inserts, and so on)

removed.

•To help avoid damaging your computer, be sure the voltage selection switch on

the power supply is set to match the AC power available at your location:

— 100 volts (V)/50 hertz (Hz) in eastern Japan and 100 V/60 Hz in western Japan

— 115 V/60 Hz in most of North and South America and some Far Eastern coun-

tries such as South Korea and Taiwan

— 230 V/50 Hz in most of Europe, the Middle East, and the Far East

Also be sure your monitor and attached devices are electrically rated to operate

with the AC power available in your location.

•Before working inside the computer, unplug the system to help prevent electric

shock or system board damage. Certain system board components continue to

receive power any time the computer is connected to AC power.

•Before disconnecting a device from the computer, disconnect the power cable to

your computer and then press the power button to help avoid possible damage to

the system board.

•To help prevent electric shock, plug the computer and device power cables into

properly grounded power sources. These cables are equipped with three-prong

plugs to help ensure proper grounding. Do not use adapter plugs or remove the

grounding prong from a cable. If you must use an extension cable, use a three-

wire cable with properly grounded plugs.

•To help protect your computer system from sudden, transient increases and

decreases in electrical power, use a surge suppressor, line conditioner, or

uninterruptible power supply (UPS).

•Be sure nothing rests on your computer system’s cables and that the cables are

not located where they can be stepped on or tripped over.

•Do not spill food or liquids on your computer. If the computer gets wet, refer to

“If Your Computer Gets Wet”in Chapter 5.

•Do not push any objects into the openings of your computer. Doing so can cause

fire or electric shock by shorting out interior components.

•Keep your computer away from radiators and heat sources. Also, do not block

cooling vents. Avoid placing loose papers underneath your computer; do not

place your computer in a closed-in wall unit or on a bed, sofa, or rug.

Ergonomic Computing Habits

CAUTION: Improper or prolonged keyboard use may result in injury.

CAUTION: Viewing the monitor screen for extended periods of time may

result in eye strain.

For comfort and efficiency, observe the following ergonomic guidelines when setting

up and using your computer system:

•Position your system so that the monitor and keyboard are directly in front of you

as you work. Special shelves are available (from Dell and other sources) to help

you correctly position your keyboard.

•Set the monitor at a comfortable viewing distance (usually 510 to 610 millimeters

[mm] [20 to 24 inches] from your eyes).

•Make sure the monitor screen is at eye level or slightly lower when you are sitting

in front of the monitor.

•Adjust the tilt of the monitor, its contrast and brightness settings, and the lighting

around you (such as overhead lights, desk lamps, and the curtains or blinds on

nearby windows) to minimize reflections and glare on the monitor screen.

•Use a chair that provides good lower back support.

•Keep your forearms horizontal with your wrists in a neutral, comfortable position

while using the keyboard or mouse.

•Always leave space to rest your hands while using the keyboard or mouse.

•Let your upper arms hang naturally at your sides.

•Sit erect, with your feet resting on the floor and your thighs level.

vii

•When sitting, make sure the weight of your legs is on your feet and not on the

front of your chair seat. Adjust your chair’s height or use a footrest, if necessary,

to maintain proper posture.

•Vary your work activities. Try to organize your work so that you do not have to

type for extended periods of time. When you stop typing, try to do things that

use both hands.

When Working Inside Your Computer

Before you remove the computer cover, perform the following steps in the sequence

indicated.

NOTICE: Do not attempt to service the computer system yourself, except

as explained in this guide and elsewhere in Dell documentation. Always

follow installation and service instructions closely.

1. Turn off your computer and all devices.

2. Ground yourself by touching an unpainted metal surface at the back of the com-

puter before touching anything inside your computer.

While you work, periodically touch an unpainted metal surface on the computer

to dissipate any static electricity that might harm internal components.

monitor screen at or below eye level

wrists relaxed and flat

arms at desk level

monitor and

keyboard

positioned

directly

in front of user

feet flat on the floor

viii

3. Disconnect any devices connected to the computer, including the monitor, from

their electrical outlets to reduce the potential for personal injury or shock. Also,

disconnect any telephone or telecommunication lines from the computer.

4. Disconnect the power cable to your computer, and then press the power button

to ground the system board.

In addition, take note of these safety guidelines when appropriate:

•When you disconnect a cable, pull on its connector or on its strain-relief loop, not

on the cable itself. Some cables have a connector with locking tabs; if you are dis-

connecting this type of cable, press in on the locking tabs before disconnecting

the cable. As you pull connectors apart, keep them evenly aligned to avoid bend-

ing any connector pins. Also, before you connect a cable, make sure both

connectors are correctly oriented and aligned.

•Handle components and cards with care. Don’t touch the components or con-

tacts on a card. Hold a card by its edges or by its metal mounting bracket.

CAUTION: There is a danger of a new battery exploding if it is incorrectly

installed. Replace the battery only with the same or equivalent type recom-

mended by the manufacturer. Discard used batteries according to the

manufacturer’s instructions.

Protecting Against Electrostatic Discharge

Static electricity can harm delicate components inside your computer. To prevent

static damage, discharge static electricity from your body before you touch any of

your computer’s electronic components, such as the microprocessor. You can do so

by touching an unpainted metal surface on the computer chassis.

As you continue to work inside the computer, periodically touch an unpainted metal

surface to remove any static charge your body may have accumulated.

You can also take the following steps to prevent damage from electrostatic discharge

(ESD):

•When unpacking a static-sensitive component from its shipping carton, do not

remove the component from the antistatic packing material until you are ready to

install the component in your computer. Just before unwrapping the antistatic

packaging, be sure to discharge static electricity from your body.

•When transporting a sensitive component, first place it in an antistatic container

or packaging.

•Handle all sensitive components in a static-safe area. If possible, use antistatic

floor pads and workbench pads.

The following notice may appear throughout this document to remind you of these

precautions:

NOTICE: See “Protecting Against Electrostatic Discharge” in the safety

instructions at the front of this guide.

Preface

About This Guide

This guide is intended for anyone who uses a Dell Dimension 900 system. It can be

used by both first-time and experienced computer users who want to learn about the

features and operation of the systems or who want to upgrade their computers. The

chapters and appendixes are summarized as follows:

•Chapter 1, “Introduction,”provides an overview of the system features and infor-

mation on preventive maintenance to protect the computer.

•Chapter 2, “Installing Upgrades on the System Board,”provides information on

performing various upgrades, such as installing additional memory. The chapter

includes a basic orientation to internal features of the computer.

•Chapter 3, “Basic Troubleshooting,”contains checklists to use before calling Dell

for technical assistance.

•Chapter 4, “Software Solutions,”has information on reinstalling software.

•Chapter 5, “Checking Inside Your Computer,”presents troubleshooting proce-

dures for system components such as expansion cards, memory, and drives.

•Chapter 6, “Getting Help,”provides information on obtaining technical assis-

tance. Users who have been unable to resolve problems using the

troubleshooting information provided in this guide can refer to this chapter.

•Appendix A, “System Specifications,”is supplemental reference material.

•Appendix B, “System Setup Program,”describes the system setup program

used for checking and changing system configuration data.

•Appendix C, “Beep Codes and System Messages,”documents status and error

messages generated during system start-up. Included are possible causes and

corrective actions.

•Appendix D, “Regulatory Notices,”provides regulatory information on the system.

Warranty and Return Policy Information

Dell Computer Corporation (“Dell”) manufactures its hardware products from parts

and components that are new or equivalent to new in accordance with industry-

standard practices.

Other Documents You May Need

NOTE: Information updates are sometimes included with your system to describe

changes to your system or software. Always read these updates before consulting

any other documentation because the updates often contain the latest information.

Besides this Reference and Troubleshooting Guide, the following documentation is

included with your system:

•The Getting Started sheet provides step-by-step instructions for setting up your

computer system.

•The Dell Dimension Systems Setup Guide describes how to properly set up your

operating system and connect a printer.

•The Dell Dimension 900 System Help describes the features and operation of

your computer. It includes tips on using your computer hardware and answers to

commonly asked questions. To open the Help, click the Start button, point to

Programs—> Dell Documents, and then click Dell Dimension Help. You may

also double-click the Dell Documents icon on the Windows desktop, click Sys-

tem Information, click System Documentation, and then click Dell Dimension

Help.

•Online documentation is included for your computer devices (such as a video or

modem card) and for any options you purchase separately from your computer.

To access this supplemental documentation, double-click the Dell Documents

icon on the Windows desktop, click System Information, and then click System

Documentation.

•Operating system documentation.

•Technical information files—sometimes called “readme”files—may be installed

on your hard-disk drive to provide last-minute updates about technical changes to

your system or reference material intended for experienced users.

Notational Conventions

The following subsections describe notational conventions used in this document.

Notes, Notices, and Cautions

Throughout this guide, blocks of text may be accompanied by an icon and printed in

bold type or in italic type. These blocks are notes, notices, and cautions, and they are

used as follows:

NOTE: A NOTE indicates important information that helps you make better use of

your computer system.

NOTICE: A NOTICE indicates either potential damage to hardware or loss

of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

Typographical Conventions

The following list defines (where appropriate) and illustrates typographical conven-

tions used as visual cues for specific elements of text throughout this document:

•Interface components are window titles, button and icon names, menu names

and selections, and other options that appear on the monitor screen or display.

They are presented in bold.

Example: Click OK.

•Keycaps are labels that appear on the keys on a keyboard. They are enclosed in

angle brackets.

Example: <Enter>

•Key combinations are series of keys to be pressed simultaneously (unless other-

wise indicated) to perform a single function.

Example: <Ctrl><Alt><Enter>

•Commands presented in lowercase bold are for reference purposes only and are

not intended to be typed when referenced.

Example: “Use the format command to . . . .”

In contrast, commands presented in the Courier New font are part of an instruc-

tion and intended to be typed.

Example: “Type format a: to format the diskette in drive A.”

•Filenames and directory names are presented in lowercase bold.

Examples: autoexec.bat and c:\windows

•Screen text is a message or text that you are instructed to type as part of a com-

mand (referred to as a command line). Screen text is presented in the Courier

New font.

Example: The following message appears on your screen:

No boot device available

Example: “Type md c:\programs and press <Enter>.”

•Variables are placeholders for which you substitute a value. They are presented in

italics.

Example: DIMM_x (where xrepresents the DIMM socket designation)

xii

Inhaltsverzeichnis

Andere Dell Desktop Handbücher

Dell

Dell Inspiron 23 Bedienungsanleitung

Dell

Dell Precision WorkStation 420 Handbuch

Dell

Dell PE R720XD Bedienungsanleitung

Dell

Dell Inspiron 3656 Bedienungsanleitung

Dell

Dell Precision T3500 Kurzanleitung

Dell

Dell OptiPlex 7450 Bedienungsanleitung

Dell

Dell Latitude 3440 Benutzerhandbuch

Dell

Dell Dimension 0JD176A01 Bedienungsanleitung

Dell

Dell PE R720XD Bedienungsanleitung

Dell

Dell Precision T5400 Bedienungsanleitung

Dell

Dell DIMENSION 3000 SYSTEMS DMC Bedienungsanleitung

Dell

Dell Dimension 4700 Series Bedienungsanleitung

Dell

Dell Precision Tower 3620 Bedienungsanleitung

Dell

Dell OptiPlex All-in-One Plus 7410 Bedienungsanleitung

Dell

Dell OptiPlex HUB Bedienungsanleitung

Dell

Dell XPS 400 Bedienungsanleitung

Dell

Dell OptiPlex 7460 Handbuch

Dell

Dell XPS 2720 Bedienungsanleitung

Dell

Dell Studio XPS 0KM04CA00 Bedienungsanleitung

Dell

Dell Inspiron Zino HD 410 Bedienungsanleitung

Dell

Dell Inspiron 24 5000 Series Bedienungsanleitung

Dell

Dell Vostro 5090 Bedienungsanleitung

Dell

Dell OptiPlex GXa Bedienungsanleitung

Dell

Dell Precision F0276 Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Compaq

Compaq iPAQ Internet Device Bedienungsanleitung

Parker

Parker PA Series Bedienungsanleitung

Lenovo

Lenovo IdeaCentre A540-24ICB Betriebsanleitung