Dell Inspiron 3050 Bedienungsanleitung
Inspiron Micro Desktop
3000 Series
Service Manual
Computer Model: Inspiron 3050
Regulatory Model: D12U
Regulatory Type: D12U001
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better
use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Copyright ©2015 Dell Inc. All rights reserved. This product is protected by U.S. and
international copyright and intellectual property laws. Dell™and the Dell logo are trademarks
of Dell Inc. in the United States and/or other jurisdictions. All other marks and names
mentioned herein may be trademarks of their respective companies.
2015 - 04
Rev. A00
Contents
Before working inside your computer.....................................7
Before you begin ...............................................................................................7
Safety instructions..............................................................................................8
Recommended tools......................................................................................... 9
After working inside your computer......................................10
Technical overview....................................................................11
Inside view of your computer.......................................................................... 11
System-board components (top view)........................................................... 12
System-board components (bottom view).....................................................13
Removing the base cover.........................................................14
Procedure.........................................................................................................14
Replacing the base cover......................................................... 17
Procedure......................................................................................................... 17
Removing the memory module.............................................. 18
Prerequisites.....................................................................................................18
Procedure.........................................................................................................18
Replacing the memory module.............................................. 20
Procedure........................................................................................................ 20
Post-requisites................................................................................................. 22
Removing the processor fan................................................... 23
Prerequisites.....................................................................................................23
Procedure.........................................................................................................23
3
Replacing the processor fan................................................... 26
Procedure........................................................................................................ 26
Post-requisites.................................................................................................26
Removing the processor heat-sink........................................27
Prerequisites.....................................................................................................27
Procedure.........................................................................................................27
Replacing the processor heat-sink........................................ 29
Procedure........................................................................................................ 29
Post-requisites.................................................................................................29
Removing the wireless card.................................................... 30
Prerequisites.................................................................................................... 30
Procedure.........................................................................................................31
Replacing the wireless card.....................................................33
Procedure.........................................................................................................33
Post-requisites................................................................................................. 35
Removing the coin-cell battery..............................................36
Prerequisites.....................................................................................................36
Procedure.........................................................................................................37
Replacing the coin-cell battery.............................................. 39
Procedure........................................................................................................ 39
Post-requisites.................................................................................................39
Removing the solid-state drive.............................................. 40
Prerequisites.................................................................................................... 40
Procedure.........................................................................................................41
4
Replacing the solid-state drive...............................................43
Procedure........................................................................................................ 43
Post-requisites.................................................................................................43
Removing the hard drive......................................................... 44
Prerequisites.................................................................................................... 44
Procedure........................................................................................................ 45
Replacing the hard drive..........................................................48
Procedure........................................................................................................ 48
Post-requisites.................................................................................................48
Removing the system board................................................... 49
Prerequisites.................................................................................................... 49
Procedure........................................................................................................ 49
Replacing the system board.................................................... 51
Procedure.........................................................................................................51
Post-requisites................................................................................................. 51
Removing the top-cover assembly........................................ 52
Prerequisites.....................................................................................................52
Procedure.........................................................................................................52
Replacing the top-cover assembly........................................ 54
Procedure........................................................................................................ 54
Post-requisites.................................................................................................54
BIOS setup program..................................................................55
Overview.......................................................................................................... 55
Entering BIOS setup program......................................................................... 55
Clearing Forgotten Passwords........................................................................56
Prerequisites...............................................................................................56
Procedure...................................................................................................57
5
Post-requisites........................................................................................... 59
Clearing CMOS Settings.................................................................................. 59
Prerequisites...............................................................................................59
Procedure.................................................................................................. 60
Post-requisites........................................................................................... 62
Flashing the BIOS...................................................................... 63
Getting help and contacting Dell...........................................64
Self-help resources......................................................................................... 64
Contacting Dell................................................................................................64
6
Before working inside your
computer
CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.
NOTE: The images in this document may differ from your computer
depending on the configuration you ordered.
Before you begin
1 Save and close all open files and exit all open applications.
2 Shut down your computer.
– Windows 8.1: On the Start screen, click or tap the power icon →
Shut down.
– Windows 7: Click or tap Start → Shut down.
NOTE: If you are using a different operating system, see the
documentation of your operating system for shut-down
instructions.
3 Disconnect your computer and all attached devices from their electrical
outlets.
4 Disconnect all cables such as telephone cables, network cables and so
on, from your computer.
5 Disconnect all attached devices and peripherals, such as keyboard,
mouse, monitor, and so on, from your computer.
6 Remove any media card and optical disc from your computer, if
applicable.
7 After the computer is unplugged, press and hold the power button for 5
seconds to ground the system board.
7
Safety instructions
Use the following safety guidelines to protect your computer from potential
damage and ensure your personal safety.
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For more safety best
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
WARNING: Disconnect all power sources before opening the
computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to
the power source.
CAUTION: To avoid damaging the computer, ensure that the work
surface is flat and clean.
CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.
CAUTION: You should only perform troubleshooting and repairs as
authorized or directed by the Dell technical assistance team. Damage
due to servicing that is not authorized by Dell is not covered by your
warranty. See the safety instructions that shipped with the product or
at dell.com/regulatory_compliance.
CAUTION: Before touching anything inside your computer, ground
yourself by touching an unpainted metal surface. While you work,
periodically touch an unpainted metal surface to dissipate static
electricity, which could harm internal components.
CAUTION: When you disconnect a cable, pull on its connector or on
its pull tab, not on the cable itself. Some cables have connectors with
locking tabs or thumb-screws that you must disengage before
disconnecting the cable. When disconnecting cables, keep them
evenly aligned to avoid bending any connector pins. When connecting
cables, ensure that the ports and connectors are correctly oriented
and aligned.
CAUTION: To disconnect a network cable, first unplug the cable from
your computer and then unplug the cable from the network device.
8
CAUTION: Press and eject any installed card from the media-card
reader.
Recommended tools
The procedures in this document may require the following tools:
• Philips screwdriver
• Plastic scribe
9
After working inside your
computer
CAUTION: Leaving stray or loose screws inside your computer may
severely damage your computer.
1 Replace all screws and ensure that no stray screws remain inside your
computer.
2 Connect any external devices, peripherals, and cables you removed
before working on your computer.
3 Replace any media cards, discs, and any other parts that you removed
before working on your computer.
4 Connect your computer and all attached devices to their electrical
outlets.
5 Turn on your computer.
10
Inhaltsverzeichnis
Andere Dell Desktop Handbücher
Dell
Dell Dimension E520 Bedienungsanleitung
Dell
Dell Precision Workstation 350 Bedienungsanleitung
Dell
Dell Vostro 400 Bedienerhandbuch
Dell
Dell Wyse V class Bedienungsanleitung
Dell
Dell OPTIPLEX 9010 ALL-IN-ONE Bedienungsanleitung
Dell
Dell OptiPlex G1 Bedienungsanleitung
Dell
Dell OptiPlex 0F1697A00 Bedienungsanleitung
Dell
Dell OptiPlex 3080 Micro Bedienungsanleitung
Dell
Dell Vostro 3470 Bedienungs- und Wartungshandbuch
Dell
Dell OptiPlex 7090 Micro Form Factor Bedienungsanleitung
Dell
Dell OptiPlex 3000 Micro Bedienungsanleitung
Dell
Dell OptiPlex XE2 Small Form Factor Bedienungsanleitung
Dell
Dell OptiPlex 5080 Bedienungsanleitung
Dell
Dell Precision WHL Bedienungsanleitung
Dell
Dell XPS 27 Bedienungsanleitung
Dell
Dell Inspiron 24 5000 Series Bedienungsanleitung
Dell
Dell Dimension 9100 Bedienungsanleitung
Dell
Dell Inspiron 20 3000 Series Bedienungsanleitung
Dell
Dell OptiPlex 3020 Bedienungsanleitung
Dell
Dell Chromebook 3100 Bedienungsanleitung
