Dell OptiPlex GX60 Bedienungsanleitung

Dell™OptiPlex™GX60SystemsUser'sGuide

Documentation for Your Computer

Finding Information for Your Computer

Technical Specifications

System Board Components

Cleaning Your Computer

Advanced Features

Booting to a USB Device

Hyper-Threading

Jumper Settings

LegacySelect Technology Control

Manageability

Password Protection

Power Button

Power Management

Security

System Setup

Small Form-Factor Computer

About Your Computer

lFront View

lBack View

lInside Your Computer

lAttaching and Removing the Computer Stand

Adding and Removing Parts

lBefore You Begin

lOpening the Computer Cover

lBattery

lChassis Intrusion Switch

lControl Panel

lDrives

lI/O Panel

lMemory

lPCI Cards and Serial Port Adapters

lPower Supply

lProcessor

lSystem Board

Telephony Applications Programming Interface

(TAPI)

lClosing the Computer Cover

Small Desktop Computer

About Your Computer

lFront View

lBack View

lInside Your Computer

lAttaching and Removing the Computer Stand

Adding and Removing Parts

lBefore You Begin

lOpening the Computer Cover

lBattery

lChassis Intrusion Switch

lControl Panel

lDrives

lI/O Panel

lMemory

lPCI Cards and Serial Port Adapters

lPower Supply

lProcessor

lSystem Board

Telephony Applications Programming Interface

(TAPI)

lClosing the Computer Cover

Small Mini-Tower Computer

About Your Computer

lFront View

lBack View

lInside Your Computer

Adding and Removing Parts

lBefore You Begin

lOpening the Computer Cover

lBattery

lChassis Intrusion Switch

lControl Panel

lDrives

lI/O Panel

Notes, Notices, and Cautions

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the Glossary.

IfyoupurchasedaDell™nSeriescomputer,anyreferencesinthisdocumenttoMicrosoft®Windows®operating systems are not applicable.

Information in this document is subject to change without notice.

©2001–2003DellInc.Allrightsreserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, OptiPlex, Inspiron, Dimension, Latitude, Dell Precision, DellNet, and Dell OpenManage are trademarks of Dell Inc.; Intel, Pentium, and

Celeron are registered trademarks of Intel Corporation; Microsoft, Windows NT, MS-DOS, and Windows are registered trademarks of Microsoft Corporation; IBM and OS/2 are

registered trademarks of International Business Machines Corporation; NetWare and Novell are registered trademarks of Novell, Inc. As an ENERGY STAR partner, Dell Inc. has

determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any

proprietary interest in trademarks and trade names other than its own.

Models: DHS, DHP, and DHM

November20039R323 Rev. A04

lMemory

lPCI Cards and Serial Port Adapters

lPower Supply

lProcessor

lSystem Board

Telephony Applications Programming Interface

(TAPI)

lClosing the Computer Cover

Computer and Software Problems

Solving Problems

Advanced Troubleshooting

Getting Help

Additional Information

Glossary

CAUTION: Safety Instructions

Ergonomic Computing Habits

Regulatory Notices

Warranty and Return Policy

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Back to Contents Page



Additional Information

Dell™OptiPlex™GX60SystemsUser'sGuide

Back to Contents Page



Back to Contents Page



Advanced Features

Dell™OptiPlex™GX60SystemsUser'sGuide



Booting to a USB Device



Memory Key

1. Insert the memory key into a USB port and restart the computer.

2. When F12 = Boot Menu appears in the upper-right corner of the screen, press <F12>.



The BIOS detects the device and adds the USB flash option to the boot menu.

3. From the boot menu, select the number that appears next to the USB device.



The computer boots to the USB device.



Floppy Drive

1. Disable the integrated floppy controller by entering system setup, going to integrated devices, and setting the diskette interface to Off.

2. Connect the USB floppy drive, insert a bootable diskette, and restart the computer.



Hyper-Threading



Hyper-Threading is an Intel®technology that can enhance overall computer performance by allowing one physical processor to function as two logical

processors, capable of performing certain tasks simultaneously. It is recommended that you use the Microsoft®Windows®XP Service Pack 1 (SP1) operating

system because Windows XP is optimized to take advantage of Hyper-Threading technology. While many programs can benefit from Hyper-Threading, some

programs have not been optimized for Hyper-Threading and may require an update from the software manufacturer. Contact the software manufacturer for

updates and information about using Hyper-Threading with your software.



To determine if your computer is using Hyper-Threading technology:

1. Click the Start button, right-click My Computer, and then click Properties.

2. Click Hardware and click Device Manager.

3. In the Device Manager window, click the plus (+) sign next to the processor type. If Hyper-Threading is enabled, the processor is listed twice.



You can enable or disable Hyper-Threading through system setup.

Jumper Settings



Booting to a USB Device

Password Protection

Hyper-Threading

Power Button

Jumper Settings

Power Management

LegacySelect Technology Control

Security

Manageability

System Setup

NOTE: To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.



To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.

System Board Jumper Settings



LegacySelect Technology Control



LegacySelect technology control offers legacy-full, legacy-reduced, or legacy-free solutions based on common platforms, hard-drive images, and help desk

procedures.Controlisprovidedtotheadministratorthroughsystemsetup,DellOpenManage™ITAssistant,orDell™custompreinstalledintegration.



LegacySelect allows administrators to electronically activate or deactivate connectors and media devices that include serial and USB connectors, a parallel

connector, a floppy drive, PCI slots, and PS/2 connectors. Connectors and media devices that are deactivated make resources available. You must restart the

computer to effect the changes.



Manageability



Alert Standard Format



ASF is a DMTF management standard that specifies "pre-operating system" or "operating system-absent" alerting techniques. It is designed to generate an

alert on potential security and fault conditions when the operating system is in a sleep state or the system is powered down. ASF is designed to supersede

previous operating system-absent alerting technologies.



The OptiPlex GX60 supports the following ASF version 1.0 alerts and remote capabilities:



NOTICE: Ensure that your computer is turned off and unplugged before you change the jumper settings. Otherwise, damage to your computer or

unpredictable results can occur.

Jumper

Setting

Description

PSWD

(green jumper)

(default)



Password features are enabled.



Password features are disabled.

RTCRST



Real-time clock reset

jumpered unjumpered

Alert

Description



For more information about Dell's ASF implementation, see the ASF User's Guide and the ASF Administrator's Guide, which are available on the Dell Support

website at support.dell.com.



Dell OpenManage IT Assistant



IT Assistant configures, manages, and monitors computers and other devices on a corporate network. IT Assistant manages assets, configurations, events

(alerts), and security for computers equipped with industry-standard management software. It supports instrumentation that conforms to SNMP, DMI, and CIM

industry standards.



Dell OpenManage Client instrumentation, which is based on DMI and CIM, is available for your computer. For information about IT Assistant, see the Dell

OpenManage IT Assistant User's Guide available on the Dell Support website at support.dell.com.



Dell OpenManage Client Instrumentation



Dell OpenManage Client Instrumentation is software that enables remote management programs such as IT Assistant to do the following:

lAccess information about your computer, such as how many processors it has and what operating system it is running

lMonitor the status of your computer, such as listening for thermal alerts from temperature probes or hard-drive failure alerts from storage devices

lChange the state of your computer, such as updating its BIOS or shutting it down remotely



A managed system is one that has Dell OpenManage Client Instrumentation set up on a network that uses IT Assistant. For information about Dell

OpenManage Client Instrumentation, see the Dell OpenManage Client Instrumentation User's Guide available on the Dell Support website at support.dell.com.



Password Protection



System Password



Option Settings



Chassis: Chassis Intrusion –

Physical Security Violation/Chassis Intrusion

–Physical Security Violation Event Cleared

The computer chassis has been opened or the chassis intrusion alert

has been cleared.

BIOS: Corrupt BIOS/Corrupt BIOS Cleared

The BIOS has been corrupted or the BIOS corruption has been

resolved.

Boot: Failure to Boot to BIOS

The BIOS did not complete loading upon initiation.

Password: System Password Violation

The system password is invalid (alert occurs after three failed

attempts).

CPU: CPU DOA Alert/CPU DOA Alert Cleared

The processor is not functioning.

Heartbeats: Entity Presence

Periodic heartbeats have been transmitted to verify system presence.

Temperature: Generic Critical Temperature Problem/Generic Critical

Temperature Problem Cleared

The computer temperature is out of limits or the computer temperature

problem has been resolved.



Voltage: Generic Critical Voltage Problem/Generic Critical Voltage Problem

Cleared

The voltage from integrated voltage regulators is out of limits or the

voltage problem has been resolved.

Power Supply: Critical Power Supply Problem/

Critical Power Supply Problem Cleared

The computer power supply voltage is out of limits or the computer

power supply voltage problem has been resolved.

Cooling Device: Generic Critical Fan Failure/Generic Critical Fan Failure

Cleared

The fan speed (rpm) is out of limits or the fan speed (rpm) problem has

been resolved.

Connectivity: Ethernet Connectivity Enabled/

Ethernet Connectivity Disabled

The Ethernet connectivity is enabled or the Ethernet connectivity is

disabled.

NOTICE: Although passwords provide security for the data on your computer, they are not foolproof. If your data requires more security, it is your

responsibility to obtain and use additional forms of protection, such as data encryption programs.

NOTICE: If you leave your computer running and unattended without having a system password assigned, or if you leave your computer unlocked so

that someone can disable the password by changing a jumper setting, anyone can access the data stored on your hard drive.

You cannot change or enter a new system password if either of the following two options is displayed:

lEnabled —A system password is assigned.

lDisabled —The system password is disabled by a jumper setting on the system board.



You can only assign a system password when the following option is displayed:

lNot Enabled —No system password is assigned, and the password jumper on the system board is in the enabled position (the default).



Assigning a System Password



To escape from the field without assigning a system password, press <Tab> or the <Shift><Tab> key combination to move to another field, or press <Esc> at

any time before you complete step 5.

1. Enter system setup (see "System Setup") and verify that Password Status is set to Unlocked.

2. Highlight System Password, and then press the left-or right-arrow key.



The option heading changes to Enter Password, followed by an empty 32-character field in square brackets.

3. Type your new system password.



You can use up to 32 characters. To erase a character when entering your password, press <Backspace> or the left-arrow key. The password is not

case sensitive.



Certain key combinations are not valid. If you enter one of these combinations, the computer emits a beep.



As you press each character key (or the spacebar for a blank space), a placeholder appears in the field.

4. Press <Enter>.



If the new system password is less than 32 characters, the whole field fills with placeholders. The option heading changes to Verify Password, followed

by another empty 32-character field in square brackets.

5. To confirm your password, type it a second time, and then press <Enter>.



The password setting changes to Enabled.

6. Exit system setup.



Password protection takes effect when you restart the computer.



Typing Your System Password



When you start or restart your computer, one of the following prompts appears on the screen.



If Password Status is set to Unlocked:



Type in the password and

-press <ENTER> to leave password security enabled.

-press <CTRL><ENTER> to disable password security.

Enter password:



If Password Status is set to Locked:



Type the password and press <Enter>.



If you have assigned a setup password, the computer accepts your setup password as an alternate system password.



If you type a wrong or incomplete system password, the following message appears on the screen:



** Incorrect password. **



If you again type an incorrect or incomplete system password, the same message appears on the screen. The third and subsequent times you type an

incorrect or incomplete system password, the computer displays the following message:



** Incorrect password. **

Number of unsuccessful password attempts: 3

System halted! Must power down.



Even after your computer is turned off and on, the previous message is displayed each time you type an incorrect or incomplete system password.



Deleting or Changing an Existing System Password

1. Enter system setup (see "System Setup") and verify that Password Status is set to Unlocked.

2. Restart your computer.

3. When prompted, type the system password.

4. Press <Ctrl><Enter> to disable the existing system password.

5. Confirm that Not Enabled is displayed for the System Password option.



If Not Enabled is displayed, the system password is deleted. If Not Enabled is not displayed, press <Alt><b> to restart the computer, and then repeat

steps 3 through 5.



To assign a new password, follow the procedure in "Assigning a System Password."

6. Exit system setup.



Setup Password



Option Settings

lEnabled —Does not allow assignment of setup passwords; users must enter a setup password to make changes to system setup.

lNot Enabled —Allows assignment of setup passwords; password feature is enabled but no password is assigned.



Assigning a Setup Password



The setup password can be the same as the system password.



1. Enter system setup (see "System Setup") and verify that Setup Password is set to Not Enabled.

2. Highlight Setup Password and press the left-or right-arrow key.

NOTE: You can use Password Status with System Password and Setup Password to further protect your computer from unauthorized changes.

NOTE: If the two passwords are different, the setup password can be used as an alternate system password. However, the system password cannot

be used in place of the setup password.



The computer prompts you to type and verify the password. If a character is not permitted, the computer emits a beep.

3. Type and then verify the password.



After you verify the password, the Setup Password setting changes to Enabled. The next time you enter system setup, the computer prompts you for

the setup password.

4. Exit system setup.



A change to Setup Password becomes effective immediately (no need to restart the computer).



Operating Your Computer With a Setup Password Enabled



When you enter system setup, the Setup Password option is highlighted, prompting you to type the password.



If you do not type the correct password, the computer allows you to view, but not modify, system setup options.



Deleting or Changing an Existing Setup Password



To change an existing setup password, you must know the setup password.

1. Enter system setup.

2. Type the setup password at the prompt.

3. Highlight Setup Password and press the left-or right-arrow key to delete the existing setup password.



The setting changes to Not Enabled.



To assign a new setup password, perform the steps in "Assigning a System Password."

4. Exit system setup.



Disabling a Forgotten Password and Setting a New Password



1. Open the computer cover.

2. Remove the jumper plug labeled PSWD from the jumper.



See "Jumper Settings" to locate the password jumper.

3. Close the computer cover.

4. Reconnect your computer and devices to electrical outlets and turn them on.



This disables the existing password(s).

5. Enter system setup and verify that Setup Password is set to Disabled.

6. Exit system setup.

NOTE: You can use Password Status with System Password and Setup Password to further protect your computer from unauthorized changes.

NOTICE: This process erases both the system and setup passwords.

CAUTION: Before you open the computer cover, see the safety instructions.



7. Open the computer cover.

8. Replace the PSWD jumper plug.

9. Close the computer cover and reconnect the computer and devices to electrical outlets and turn them on.



This reenables the password feature. When you enter system setup, both password options appear as Not Enabled—the password feature is enabled

but no password is assigned.

10. Assign a new system and/or setup password.



Power Button



You can use the ACPI feature to configure the function of the Windows 2000 and Windows XP operating systems.

Power Button Functions With ACPI Enabled



Power Button Functions With ACPI Disabled



Power Management



Your computer can be set to use less power when you are not working. You control the power usage through the operating system installed on your computer

and certain option settings in system setup. These periods of reduced power are called "sleep states":

lStandby. In this sleep state, power is reduced or turned off for most components, including the cooling fans. However, system memory remains active.



This state is not supported by Microsoft Windows NT®4.0.



lHibernate. This sleep state reduces power consumption to a minimum by writing all data in system memory to a hard drive and then removing system

power. Waking up from this state restarts the computer, and the memory contents are restored. Operation then resumes where the computer left off

when it entered the hibernation state.



This state is not supported by Windows NT 4.0.

CAUTION: Before you open the computer cover, follow the safety instructions.

NOTICE: To turn off your computer, perform an orderly computer shutdown when possible.

Action

Results



Computer Turned On

and ACPI Enabled

Computer in Standby

Mode

Computer Turned Off

Press power

button

Computer goes into standby mode or turns off (depending on the operating

system setup)

Computer turns on

Boots and computer turns

Hold power button

for 6 seconds*

Computer turns off

Boots and computer turns

NOTE: Pressing or holding the power button to shut down the computer may result in data loss. Use the power button to shut down the computer only if the

operating system is not responding.

Action

Results



Computer Turned On and ACPI Disabled

Computer in Suspend Mode

Computer Turned Off

Press power button

Computer turns off immediately

Boots and computer turns on

Hold power button for 6 seconds*

Computer turns off

Boots and computer turns on

NOTE: Pressing or holding the power button to shut down the computer may result in data loss. Use the power button to shut down the computer only if the

operating system is not responding.

NOTE: All components installed in the computer must support this feature and have the appropriate drivers loaded to enter standby. For more

information, see the manufacturer's documentation for each component.

Andere Handbücher für OptiPlex GX60

Inhaltsverzeichnis

Andere Dell Desktop Handbücher

Dell

Dell OptiPlex 160L Bedienungsanleitung

Dell

Dell OptiPlex 9020 AIO Bedienungsanleitung

Dell

Dell OptiPlex 9020 Betriebsanleitung

Dell

Dell Precision T3600 Betriebsanleitung

Dell

Dell Dimension 4300S Bedienungsanleitung

Dell

Dell GX520 - OptiPlex - 512 MB RAM Bedienungsanleitung

Dell

Dell OptiPlex 380 Betriebsanleitung

Dell

Dell OptiPlex SX280 Bedienungs- und Sicherheitshinweise

Dell

Dell OptiPlex 330 Bedienungsanleitung

Dell

Dell Inspiron 3268 Bedienungsanleitung

Dell

Dell OptiPlex 755 Bedienungsanleitung

Dell

Dell Alienware Area-51 ALX Bedienungsanleitung

Dell

Dell Precision 3930 Rack Bedienungs- und Wartungshandbuch

Dell

Dell Precision Workstation 370 Bedienungsanleitung

Dell

Dell OPTIPLEX 740 Systemhandbuch

Dell

Dell GX260 - Optiplex Pentium 4 2.0GHz 512MB 40GB... Bedienungsanleitung

Dell

Dell Dimension 0JD176A01 Bedienungsanleitung

Dell

Dell OptiPlex 5080 Micro Bedienungsanleitung

Dell

Dell OptiPlex 7040 Bedienungsanleitung

Dell

Dell OptiPlex 5000 Micro Bedienungs- und Wartungshandbuch

Dell

Dell Dimension 5100 Bedienungsanleitung

Dell

Dell Aurora R6 Bedienungsanleitung

Dell

Dell OptiPlex 3011 AIO Betriebsanleitung

Dell

Dell OptiPlex 3080 Small Form Factor Cable Cover Bedienungs- und Wartungshandbuch

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Compaq

Compaq iPAQ Internet Device Bedienungsanleitung