Dell Precision T3500 Bedienungsanleitung

Dell™Precision™T3500ServiceManual

Notes, Cautions, and Warnings

IfyoupurchasedaDell™nSeriescomputer,anyreferencesinthisdocumenttoMicrosoft®Windows®operating systems are not applicable.

Information in this document is subject to change without notice.

©2009DellInc.Allrightsreserved.

Reproduction of this material in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and Dell Precision are trademarks of Dell Inc.; Intel and Xeon are registered trademarks of Intel Corporation; Bluetooth is a

registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; Blu-ray Disc is a trademark of the Blu-ray Disc Association; Microsoft, Windows,Windows

Server,MS-DOS, Aero, Windows Vista.and the Windows Vista start button are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other

countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any

proprietary interest in trademarks and trade names other than its own.

Model DCTA

September2009Rev.A01



Working on Your Computer

Adding and Replacing Parts

Specifications

Diagnostics

About Your System Board

System Setup



NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

About Your System Board

DellPrecision™T3500ServiceManual

Password Enable Jumper

NVRAM Reset Jumper

System Board Schematic

Your computer's system board offers two jumpers—a password enable jumper and a RTCRST (Real Time Clock Reset) jumper.

Password Enable Jumper

PSWD -Password enable. The system password will be cleared and disabled when the system is started with this jumper removed.

Pins 1-2 shorted enables password

NVRAM Reset Jumper

RTCRST -Clears NVRAM. The NVRAM will be cleared when the jumper is closed (use the jumper from the password bridge). To properly clear; AC power must

be applied (not necessarily turned on) to the system for about 10 seconds while the jumper is closed.

Pins 1-2 shorted clears NVRAM

The picture below shows the location of the configuration jumpers on the system board.

System Board Schematic

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTE: You can use the RTCRST jumper procedure above to attempt recovery from a No POST, No Video situation.

PCI Card Slot (Slot 6)

PCI Card Slot (Slot 5)

PCIe x16 (Slot 4)

PCIe x4 (Slot 3)

PCIe x16 (Slot 2)

PCIe x4 (Slot 1)

Audio Front Panel (FP_AUDIO)

Internal USB (USB_1)

LPC_DEBUG

Processor Connector

CPU Power Connector (POWER_CPU)

Front Bezel Fan (FAN_Front)

Front Cage Fan (FAN_CCAG)

Memory Module (RAM) Connectors (DIMM_1-6)

Jumpers (PSWD & RTCRTS)

Battery Socket (CMOS Battery)

Internal USB Socket (for Flexbay Card Reader)

Main Power Connector

SATA Connectors (SATA_0-4)

HDD Fan (FAN_HDD)

Serial Connector (SERIAL2)

FDD Connector

Front Panel Connector (FRONTPANEL)

Chassis Intrusion Connector (INTRUDER)

System Setup

DellPrecision™T3500ServiceManual

POST Keystrokes

Boot Menu

Entering System Setup

System Setup Navigation Keystrokes





POST Keystrokes

YourcomputerhasseveralkeystrokeoptionsavailableduringthePOSTprocessattheDell™Logoscreen.

Boot Menu

AswithpreviousDellPrecision™workstationplatforms,yourcomputerincludesaone-time boot menu. This feature offers a quick and convenient method with

which to bypass the System Setup-defined boot device order and boot directly to a specific device (e.g., floppy, CD-ROM, or hard drive).

The boot menu enhancements introduced on previous platforms are as follows:

lEasier access—Although the <Ctrl><Alt><F8> keystroke still exists and can be used to call up the menu, you can also simply press <F12> during

system boot to access the menu.

lDiagnostics options—The boot menu includes two diagnostic options, IDE Drive Diagnostics (90/90 Hard Drive Diagnostics) and Boot to the Utility

Partition.

Entering System Setup

Press <F2> to enter System Setup and change the user-definable settings. If you have trouble entering System Setup using this key, press <F2> when the

keyboard LEDs first flash.

Follow the on-screen instructions to view and/or change any settings. On each screen, the system setup options are listed at the left. To the right of each

option is the setting or value for that option. You can change settings that appear as white type on the screen. Options or values that you cannot change

(because they are determined by your Tablet-PC) appear less bright.

The upper-right corner of the screen displays help information for the currently highlighted option. The lower-right corner displays information about the

computer. System setup key functions are listed across the bottom of the screen.

The system setup screens display the current setup information and settings for your computer, such as:

lSystem configuration

lBoot order

lBoot (start-up) configuration

lBasic device configuration settings

lSystem security and hard drive password settings

System Setup Navigation Keystrokes

Use the following keystrokes to navigate the BIOS screens.

Keystroke

Function

Description

<F2>

Enter System Setup

Use System Setup to make changes to the user-definable settings.

<F12>or

Enter Boot Menu

One-time boot and diagnostics utility menu

<F3>

Network Boot

Bypass the BIOS boot sequence and boot directly to the network

Navigation Keystrokes

Action

Keystroke

Expand and collapse field

<Enter>, left-and right-arrow keys, or +/–

Expand or collapse all fields

< >

Exit BIOS

<Esc> —Remain in Setup, Save/Exit, Discard/Exit

Change a setting

Left-and right-arrow keys



Select field to change

<Enter>

Cancel a modification

<Esc>

Reset defaults

<Alt><F> or Load Defaults menu option

NOTE: Depending on your computer and any installed devices, the items listed in this section may or may not appear.

Diagnostics

DellPrecision™T3500ServiceManual

Dell Diagnostics

Power Button Light Codes

Diagnostic Light Codes

Beep Codes

Dell Diagnostics

When to Use the Dell Diagnostics

It is recommended that you print these procedures before you begin.

Enter system setup (see Entering System Setup), review your computer's configuration information, and ensure that the device you want to test displays in

System Setup and is active.

Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities disc.

Starting the Dell Diagnostics From Your Hard Drive

1. Turn on (or restart) your computer.

2. When the DELL logo appears, press <F12> immediately.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft®Windows®desktop. Then shut down

your computer (see Turning Off Your Computer), and try again.

3. When the boot device list appears, highlight Boot to Utility Partition and press <Enter>.

4. When the Dell Diagnostics Main Menu appears, select the test that you want to run.

Starting the Dell Diagnostics From the Drivers and Utilities Disc

1. Insert the Drivers and Utilities disc.

2. Shut down and restart the computer.

When the DELL logo appears, press <F12> immediately.

If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again.

3. When the boot device list appears, highlight Onboard or USB CD-ROM Drive and press <Enter>.

4. Select the Boot from CD-ROM option from the menu that appears and press <Enter>.

5. Type 1to start the menu and press <Enter> to proceed.

6. Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer.

7. When the Dell Diagnostics Main Menu appears, select the test you want to run.

Dell Diagnostics Main Menu

1. After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want.

2. If a problem is encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and

problem description and follow the instructions on the screen.

NOTE: The Dell Diagnostics software works only on Dell computers.

NOTE: The Drivers and Utilities disc is optional and may not ship with your computer.

NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from your Drivers and Utilities disc.

NOTE: The next steps change the boot sequence for one time only. On the next startup, the computer boots according to the devices specified in the

system setup program.

Option

Function

Express Test

Performs a quick test of devices. This test typically takes 10 to 20 minutes and requires no interaction on your part. Run Express Test first to

increase the possibility of tracing the problem quickly.

Extended

Test

Performs a thorough check of devices. This test typically takes 1 hour or more and requires you to answer questions periodically.

Custom Test

Tests a specific device. You can customize the tests you want to run.

Symptom

Tree

Lists the most common symptoms encountered and allows you to select a test based on the symptom of the problem you are having.

3. If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described in the following table for more information.

4. When the tests are completed, if you are running the Dell Diagnostics from the Drivers and Utilities disc, remove the disc.

5. Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen.

Power Button Light Codes

The power LED located in the power button on the front of the computer illuminates and blinks or remains solid to indicate five different states:

lNo light—System is in the off state (S5, or mechanical (AC power not applied) OFF).

lSolid Amber—System fault, but Power Supply is good—normal operating state (S0 ).

lBlinking Amber—System fault error condition including Power Supply (only +5VSB working), Vreg failure, missing or bad CPU.

lBlinking Green—System is in power saving states S1, S3 or S4. (Blink rate is 1Hz). No fault/error condition.

lSolid Green—System is fully functional and is in S0 (ON) state.

Diagnostic Light Codes

Four (4) single color lights are incorporated on the front control panel to serve as a diagnostic aid for troubleshooting systems exhibiting No Post/No Video

symptoms. The lights do not report runtime errors.

Tab

Function

Results

Displays the results of the test and any error conditions encountered.

Errors

Displays error conditions encountered, error codes, and the problem description.

Help

Describes the test and may indicate requirements for running the test.

Configuration

Displays your hardware configuration for the selected device.

The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays

the information in the device list in the left pane of the screen. The device list may not display the names of all the components installed on

your computer or all devices attached to your computer.

Parameters

Allows you to customize the test by changing the test settings.

Diagnostic LED Patterns

LED pattern (1234)

LED Description

State description

1 - Off

2 - Off

3 - Off

4 - On

BIOS checksum failure detected; system is in recovery mode.

1 - Off

2 - Off

3 - On

4 - Off

Possible processor failure.

1 -Off

2 -Off

3 -On

4 -On

Memory failure.

1 -Off

2 -On

3 -Off

4 -Off

Possible expansion card failure.

1 -Off

2 -On

3 -Off

4 -On

Possible video failure.

1 -Off

2 -On

3 -On

4 -Off

Diskette drive or hard drive failure.

1 -Off

2 -On

3 -On

4 -On

Possible USB failure.

1 -On

2 -Off

3 -Off

4 -Off

No memory modules detected.

1 -On

2 -Off

3 -Off

4 -On

System board failure.

1 -On

2 -Off

3 -On

4 -Off

Memory configuration error.

Beep Codes

When errors occur during a boot routine that cannot be reported on the monitor, the computer may emit a beep code that identifies the problem. The beep

code is a pattern of sounds: for example, one beep followed by a second beep, then followed by a burst of three beeps (code 1-1-3) means that the computer

was unable to read the data in nonvolatile random-access memory (NVRAM). If the system loses power and beeps constantly when you turn it back on, the

BIOS is probably corrupted.



1 -On

2 -Off

3 -On

4 -On

Possible system board resource and/or system board hardware failure.

1 -On

2 -On

3 -Off

4 -Off

Possible system resource configuration error.

1 -On

2 -On

3 -On

4 -Off

Other failure.

1 -On

2 -On

3 -On

4 -On

End of POST -Hand off to boot.

1 -Off

2 -Off

3 -Off

4 -Off

The system is in a normal operating condition after POST.

System Beep Codes

Beep

Code

Description

Beep

Code

Description

1-1-2

CPU register test in progress

2-4-3

1st 64 K RAM chip or data line failure -bit E

1-1-3

CMOS read/write test in progress or failure

2-4-4

1st 64 K RAM chip or data line failure -bit F

1-1-4

BIOS ROM checksum in progress or failure

3-1-1

Slave DMA register test in progress or failure

1-2-1

Timer Test in progress or failure

3-1-2

Master DMA register test in progress or failure

1-2-2

DMA initialization in progress or failure

3-1-3

Master IMR test in progress or failure

1-2-3

DMA page register read/write test in

progress or failure

3-1-4

Slave IMR test in progress or failure

1-3-1

RAM refresh verification in progress or failure

3-2-2

Interrupt vector loading in progress

1-3-2

1st 64 K RAM test in progress or failure

3-2-4

Keyboard controller test in progress or failure

1-3-3

1st 64 K RAM chip or data line failure (multi

bit)

3-3-1

CMOS power fail and checksum test in

progress

1-3-4

1st 64 K RAM odd/even logic failure

3-3-2

CMOS Config info validation in progress

1-4-1

1st 64 K RAM address line failure

3-3-3

RTC/Keyboard controller not found

1-4-2

1st 64 K RAM parity test in progress or failure

3-3-4

Screen memory test in progress or failure

1-4-3

Fail-safe timer test in progress

3-4-1

Screen initialization test in progress or failure

1-4-4

Software NMI port test in progress

3-4-2

Screen retrace tests test in progress or failure

2-1-1

1st 64 K RAM chip or data line failure -bit 0

3-4-3

Search for video ROM in progress

2-1-2

1st 64 K RAM chip or data line failure -bit 1

4-2-1

Timer tick interrupt test in progress or failure

2-1-3

1st 64 K RAM chip or data line failure -bit 2

4-2-2

Shutdown test in progress or failure

2-1-4

1st 64 K RAM chip or data line failure -bit 3

4-2-3

Gate A20 failure

2-2-1

1st 64 K RAM chip or data line failure -bit 4

4-2-4

Unexpected interrupt in Protected Mode

2-2-2

1st 64 K RAM chip or data line failure -bit 5

4-3-1

RAM test in progress or failure above address

0FFFFh

2-2-3

1st 64 K RAM chip or data line failure -bit 6

4-3-2

No memory in Bank 0

2-2-4

1st 64 K RAM chip or data line failure -bit 7

4-3-3

Interval Timer Channel 2 test in progress or

failure

2-3-1

1st 64 K RAM chip or data line failure -bit 8

4-3-4

Time-Of-Day Clock test in progress or failure

2-3-2

1st 64 K RAM chip or data line failure -bit 9

4-4-1

Super I/O chip failure

2-3-3

1st 64 K RAM chip or data line failure -bit A

4-4-4

Cache test failure

2-3-4

1st 64 K RAM chip or data line failure -bit B



2-4-1

1st 64 K RAM chip or data line failure -bit C



2-4-2

1st 64 K RAM chip or data line failure -bit D



Adding and Replacing Parts

DellPrecision™T3500ServiceManual



Cover

Front Bezel

Hard Drive

Floppy Drive

Memory Card Reader

Memory Shroud

Battery

Video Card

Heat Sink and Processor

I/O Data Cable



I/O Panel

Power Supply

Drives Bezel

Optical Drive

Memory

Expansion Card

Chassis Intrusion Switch

Fan Assembly

Systemboard



Specifications

DellPrecision™T3500ServiceManual











Processors

System Information

Memory

Video

Audio

Expansion Bus

Drives

Connectors

Controls and Lights

Power

Physical

Environmental



NOTE: Offerings may vary by region. For more information regarding the configuration of

your Tablet-PC, click Start (or Start in Windows XP)®Help and Support, and then

select the option to view information about your Tablet-PC.

Processor

Processor types

Intel®Xeon®Processor 3500 series

Intel Xeon Processor 5500 series

SystemInformation

System chipset

Intel X58+ ICH10

Data bus width

64 bits

Memory

Memory module connectors

Six

Memory module capacities

1 GB, 2 GB, or 4 GB

Memory type

DDR3 1066 MHz & 1333 MHz (Both ECC and Non-ECC)

Minimum memory

1 GB

Maximum memory

24 GB

Video

Video type:



Discrete

Two PCI Express 2.0 x16 slots

Note: Support for discrete full length full height

graphics option through PCIe x16 graphics card slot

Audio

Audio type

ADI1984A integrated audio

Expansion Bus

Bus type

PCI 2.3

PCI Express 2.0 (PCIe-x16)

PCI Express 1.1 (PCIe-x1)

SATA 1.0 and 2.0

USB 2.0

eSATA

Bus speed

133 MB/s (PCI)

x1-slot bidirectional speed -500 MB/s (PCI Express)

x16-slot bidirectional speed -8 GB/s (PCI Express)

1.5 Gbps and 3.0 Gbps (SATA)

480-Mbps high speed, 12-Mbps full speed, 1.2-Mbps

Low speed (USB)

PCI Connectors

connectors

Two

connector size

124 pins

connector data width (maximum)

32 bits

PCI Express x8



connector

Two

connector size

98 pins

PCI Express x16



connector

Two

connector size

164 pins

Drives

Externally accessible

One 3.5-inch drive bay (FlexBay), Two 5.25-inch drive

bays

Internally accessible

Two 3.5-inch SATA drive bays

Andere Handbücher für Precision T3500

Inhaltsverzeichnis

Andere Dell Desktop Handbücher

Dell

Dell OptiPlex E1 Bedienungsanleitung

Dell

Dell OptiPlex 81FTK Bedienungsanleitung

Dell

Dell Vostro 3671 Bedienungsanleitung

Dell

Dell Inspirion 3656 Bedienungsanleitung

Dell

Dell Inspiron 24 3000 series Bedienungsanleitung

Dell

Dell OptiPlex 170L Bedienungsanleitung

Dell

Dell Precision 9T217 Bedienungsanleitung

Dell

Dell POWEREDGE 4300 Bedienungsanleitung

Dell

Dell Precision 5820 Tower Bedienungs- und Wartungsanleitung

Dell

Dell 2350 - Wireless WLAN Broadband Router Bedienungsanleitung

Dell

Dell XPS 15 Bedienungsanleitung

Dell

Dell XPS 2720 Bedienungsanleitung

Dell

Dell OptiPlex 990 Desktop Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

Dell

Dell OptiPlex 7440 Bedienungsanleitung

Dell

Dell Precision 8F765 Bedienungsanleitung

Dell

Dell Inspiron 660 Bedienungsanleitung

Dell

Dell OptiPlex 160 Bedienungsanleitung

Dell

Dell PowerEdge T320 Bedienungsanleitung

Dell

Dell XPS ONE MTG Bedienungsanleitung

Dell

Dell XPS One A2420 Bedienungsanleitung

Dell

Dell GX260 - Optiplex Pentium 4 2.0GHz 512MB 40GB... Bedienungsanleitung

Dell

Dell OptiPlex 780 Bedienungsanleitung

Dell

Dell OptiPlex 960 Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Compaq

Compaq iPAQ Internet Device Bedienungsanleitung

Parker

Parker PA Series Bedienungsanleitung

Lenovo

Lenovo IdeaCentre A540-24ICB Betriebsanleitung