Dell X30 - Axim X30 - Windows Mobile 2003 SE 312... Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

3

Andere Dell PDA Handbücher

Dell

Dell Axim X30 HC02U Bedienungsanleitung

Dell

Dell Axim X30 Firmware-Update

Dell

Dell Axim X5 HC01U Bedienungsanleitung

Dell

Dell X51 - Axim x51 520MHz 64MB WiFi Windows PDA Installations- und Betriebshandbuch

Dell

Dell Axim X30 Benutzerhandbuch

Dell

Dell Axim X3 Bedienungsanleitung

Dell

Dell Axim X30 Bedienungsanleitung

Dell

Dell Axim X30 Bedienungsanleitung

Dell

Dell X51 - Axim x51 520MHz 64MB WiFi Windows PDA Installations- und Betriebshandbuch

Dell

Dell X51 - Axim x51 520MHz 64MB WiFi Windows PDA Bedienungsanleitung

Dell

Dell HC03U Bedienungsanleitung

Dell

Dell Axim X51 Bedienungsanleitung

Beliebte PDA Handbücher anderer Marken

SPOT

SPOT SPOT Bedienungsanleitung

Palm

Palm handheld Bedienungsanleitung

Winmate

Winmate E500QK Bedienungsanleitung

Getac

Getac PS236 Bedienungsanleitung

Sharp

Sharp CE-1600P Bedienungsanleitung

HTC

HTC PHAR100 Bedienungsanleitung

Mindeo

Mindeo M40 Bedienungsanleitung

Acer

Acer n30 Bedienungsanleitung

ASCOM

ASCOM 9D24 EX Bedienungsanleitung

Unitech

Unitech PA520BTNF Bedienungsanleitung

HandHeld

HandHeld Nautiz X3 Bedienungsanleitung

Casio

Casio PALM Bedienungsanleitung

Sharp

Sharp TM-20 Kurzanleitung

Atid

Atid AT870 Bedienungsanleitung

AML

AML M7225 Bedienungsanleitung

Audiovox

Audiovox Maestro Technisches Handbuch

Casio

Casio PV-750 Plus Gebrauchsanweisung

Unitech

Unitech PT630 Bedienungsanleitung

Dell AXIM X30/X50/X50v wireless setup

1. Turn on your PDA and start from the Today Screen.

2. Go to SETTINGS to get to the DELL WLAN Utility under the CONNECTIONS

tab.

3. Enable the Odyssey Client in the CONNECTIONS tab.

4. Verify connection to “hostreg” via the Odyssey Client.

5. Register the device in Internet Explorer via the “hostreg” connection. Start from

the Today Screen. Be sure to key in “hostreg.cwu.edu” in the Internet Explorer

address window to get access to the Host Registration website…

6. LOGON to “hostreg” with your distinguished network logon credentials.

7. Select the “Building” you will be using the wireless device in. Select

“WIRELESS” as your Category. Leave “Tag #” blank (if you are Faculty/staff,

you MUST populate this field with the 5-digit tag number attached to the device).

“Hardware Address” should be populated by a 12-digit alpha-numeric MAC

Address (Media Access Control address). “Operating System” should be selected

as Windows CE.

8. “Agree and Submit” to the use of the CWU Wireless network. (It takes 5-minutes

for the device to be registered in the Host Registration database.)

9. SOFTBOOT the device…

Performing a Reset

Soft Reset

When you perform a soft reset, the device deletes any data that has not been

saved but saves any data that has been stored in memory. Try performing a

soft reset if the device does not respond when you tap the display or press

a button.

To perform a soft reset, use the reset stylus to press the reset button.

reset stylus

reset button

Hard Reset

NOTICE: When you perform a hard reset, you lose all the data stored in your

device memory, and any programs that you installed on your device.

Perform a hard reset if:

• You want to delete all the data stored in your device memory.

• You forget your password and need to clear it.

• Your device is experiencing severe operational problems and you have

already attempted a soft reset.

NOTICE: It is strongly recommended that you back up your data before you

perform a hard reset. See ActiveSync Help on your computer for

more information.

To perform a hard reset:

1 Press and hold the power button.

2 Using the reset stylus, hold the reset button for about 2 seconds.

3 Follow the instructions on the screen.

10. Create wireless profile in the Odyssey Client to be able to get network connection

to the “cwu” wireless network. Start from the Today Screen, go to SETTINGS,

CONNECTIONS and click on Odyssey Client…

11. Go to SETTINGS and click on CONFIGURE…

12. Hit the ADD button…