Dell PowerEdge RAID Controller S300 Kurzanleitung

Dell™ S300/S300w/S300wi

Firmware Upgrade Setup Guide

1. Projector Firmware …………………………….

Page 1 ~ 4

. S300 Network Firmware…………...........

Page 5 ~ 7

3. S300w/S300wi Wireless Firmware......

Page 8 ~ 11

Released date: Nov 01

1. Projector F

irmware Upgrade

NOTE: Projector firmware

upgrades set are

Part A: Install the Dell Flasher Tool on our Computer

1. Please follow your computer

operating system to

You may find the setup file in the

Flasher

extracting the .zip file.

Win 8, Win 7, Vista, and XP 3 -

bit OS: Pl

Win 8, Win 7, Vista, and XP 64-

bit OS: Pl

NOTE

: Dell_Flasher tool does not support Mac OS.

. Double-click Setup.exe.

3. Follow the on-

screen instructions to complete the setup and find the installed flasher on

NOTE

: You only need to install the

irmware Upgrade

Settings

upgrades set are

the same for the S300, S300w, and S300wi models.

Part A: Install the Dell Flasher Tool on our Computer

operating system to

select flasher version.

Flasher

1.8_xx

folder created after downloading and unzipping or

bit OS: Pl

ease install and use Flasher 1.8

_3 bit version

bit OS: Pl

ease install and use Flasher 1.8

_64 bit version

: Dell_Flasher tool does not support Mac OS.

screen instructions to complete the setup and find the installed flasher on

: You only need to install the

“Dell Flasher Tool” once.

the same for the S300, S300w, and S300wi models.

folder created after downloading and unzipping or

_3 bit version

_64 bit version

screen instructions to complete the setup and find the installed flasher on

Start menu.

Part B: Install the USB driver

on our Computer

4. Plug in the power cord and perform following steps to enter

NOTE: Please DON’T

press power button to

Step A: Press the Menu

button and hold it.

Step B: Continuously hold the

Step C:

Release the buttons after

5. Connect the Mini USB (type

A to mini B)

NOTE: If Windows pop-

up this diagram, please click

Step A. Press and hold

the “Menu” button.

Step B. Press the

“

button for a second.

on our Computer

4. Plug in the power cord and perform following steps to enter

download mode.

press power button to

turn on

the projector when entering download mode.

button and hold it.

button and press the Power button

simultaneously

Release the buttons after

Temp and Error LED

LEDs are both lighted up.

A to mini B)

cable

to the projector and the computer.

up this diagram, please click

Cancel.

“

Power”

button for a second.

the projector when entering download mode.

simultaneously

LEDs are both lighted up.

to the projector and the computer.

6. Manually install the USB driver: Start



All Program



Dell_Flasher



install_driver.exe

NOTE: You only need to install the “USB driver” once.

Part C: Launch the Dell Flasher Tool to Upgrade Projector Firmware

NOTE: Please keep the projector in download mode as step 4.

7. Execute the Dell_Flasher: Start



All Program



Dell_Flasher



Flasher.exe

8. Dell_Flasher is executing and please check USB status is Connected before upgrade firmware.

9. Follow these steps to upgrade firmware:

Step A: Click “Browse” to find the firmware (*.img) from downloaded Projector FW folder.

Step B: Click “DownLoad” to pop-up the dialog.

Step C: Click “ ES” to start the upgrade projector firmware.

Step D: Start to Erasing projector.

Step E: Download and upgrade firmware.

WARNING: When you are in downloading mode, PLEASE do not press the keyboard.

Step F: Firmware completed, press “OK” and plug out the USB cable from projector.

10. Unplug and re-plug in the power cord to turn on S300, S300w or S300wi projector.

NOTE: If you have installed Dell Flasher Tool and USB driver once, you may skip steps 1~ 3 and 6, and

only proceed step 4, 5 and 7~10 afterward to upgrade the projector firmware.

S300 Network F

irmware Upgrade

NOTE

: Network firmware upgrades steps are the same for the Win OS and

Part A: Enable

LAN on the Projector

Connect the power cable and turn on the projector by pressing the power button.

. Follow these steps to re-

active Network

Part B: Connect our

Computer to the Projector and Login Web Management

3. C

onnect the LAN cable to the projector and the computer.

irmware Upgrade

Setup

: Network firmware upgrades steps are the same for the Win OS and

Mac OS.

LAN on the Projector

Connect the power cable and turn on the projector by pressing the power button.

active Network

feature when the Network is Off:

SET UP

Computer to the Projector and Login Web Management

onnect the LAN cable to the projector and the computer.

Mac OS.

Connect the power cable and turn on the projector by pressing the power button.

SET UP

→ Network → On.

Computer to the Projector and Login Web Management

4. Open and enter the Internet Protocol (TCP/IP) on your computer, please enter IP address and Subnet

mask, then click OK.

5. Open the Internet browser on your computer, and enter the 10.0.50.100 in the browser’s address bar.

You will be directed to the S300 Web Management page.

Part C: Upgrade Network Firmware

6. The S300 web management page opens. Click Firmware Update.

7. Click Update.

8. Follow these steps to upgrade firmware:

Step A: Click “Browse” to first find the firmware (*.bin) from downloaded Network FW folder.

Step B: Click “Update” to start the upgrade firmware.

Step C: Download and upgrade firmware.

Step D: Firmware completed, click “ReLogin” to go back to the Web Management Home Page.

S300w/S300wi Wireless Firmware Upgrade Setup

NOTE: Wireless firmware upgrades set are the same for the S300w and S300wi models.

NOTE: Wireless firmware upgrades steps are the same for the Win OS and Mac OS.

Part A: Enable Wireless or LAN on the Projector

1. Connect the power cable and turn on the projector by pressing the power button.

-1. If the LAN cable is used for firmware upgrade, follow these steps to re-active Wireless/LAN feature

when the Wireless/LAN is Off: SET UP → Wireless / Network → On → Wireless → Disconnected. Go to

Step 3-1.

- . If the Wireless Connection is used for firmware upgrade, follow these steps to re-active wireless

connection when the wireless connection is Disconnect: SET UP → Wireless / Network → On → Wireless

→ Connected. Go to Step 3-2.

Part B:

Connect our Computer to the Projector

3-1. If you select the LAN cable

for upgrade, connect the LAN cable to the projector and the computer.

3- . If you select the Wireless

connection

wireless network.

NOTE:



Your computer must have wireless network function to

When you connect to the

S300w

other wireless network.

4. Open the Internet browser on your computer. You will be automatically directed to the

Web Management page.

NOTE

: If the web page does not load automatically, enter the IP address (default IP address is

19 .168.100.10) in the browser

Connect our Computer to the Projector

and Login Web Management

for upgrade, connect the LAN cable to the projector and the computer.

connection

for upgrade, connect your computer to the

Your computer must have wireless network function to

detect the connection.

S300w

or S300wi

wireless network, you will lose wireless connectivity with

4. Open the Internet browser on your computer. You will be automatically directed to the

: If the web page does not load automatically, enter the IP address (default IP address is

19 .168.100.10) in the browser

’s address bar.

and Login Web Management

for upgrade, connect the LAN cable to the projector and the computer.

for upgrade, connect your computer to the

S300w or S300wi

detect the connection.

wireless network, you will lose wireless connectivity with

4. Open the Internet browser on your computer. You will be automatically directed to the

S300w or S300wi

: If the web page does not load automatically, enter the IP address (default IP address is

Andere Handbücher für PowerEdge RAID Controller S300

Dieses Handbuch passt für folgende Modelle

Andere Dell Projektor Handbücher

Dell

Dell 4310WX Bedienungsanleitung

Dell

Dell P318S Bedienungsanleitung

Dell

Dell S560P Bedienungsanleitung

Dell

Dell S320 Bedienungsanleitung

Dell

Dell Mobile M115HD Bedienungsanleitung

Dell

Dell PowerEdge RAID Controller S300 Bedienungsanleitung

Dell

Dell PowerEdge 1850 Bedienungsanleitung

Dell

Dell 3200MP - XGA DLP Projector Montageanleitung

Dell

Dell 7700 FullHD Bedienungsanleitung

Dell

Dell M318WL Bedienungsanleitung

Dell

Dell P519HL Bedienungsanleitung

Dell

Dell S500 Kurzanleitung

Dell

Dell S520 Bedienungsanleitung

Dell

Dell 1409X Bedienungsanleitung

Dell

Dell 1209S Bedienungsanleitung

Dell

Dell Mobile M900HD Bedienungsanleitung

Dell

Dell 1201MP Bedienungsanleitung

Dell

Dell 1200MP Bedienungsanleitung

Dell

Dell M110 Bedienungsanleitung

Dell

Dell 1800MP Bedienungsanleitung

Dell

Dell 2200MP Bedienungsanleitung

Dell

Dell M410HD Bedienungsanleitung

Dell

Dell PowerEdge 1550 Bedienungsanleitung

Dell

Dell 1410X - XGA DLP Projector Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung