Dell PowerVault NF100 Bedienungsanleitung

Microsoft®Windows®

Storage Server 2003

R2 x64 Edition With SP2

for Dell™ PowerVault™

Storage Solutions

Getting Started Guide

使用入门指南

入門指南

Guide de mise en route

Handbuch Zum Einstieg

はじめに

시작 안내서

Guía de introducción

Microsoft®Windows®

Storage Server 2003 R2

x64 Edition With SP2 for Dell™

PowerVault™ Storage

Solutions

Getting Started Guide

Notes and Notices

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

___________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, PowerEdge, PowerVault, and OpenManage are

trademarks of Dell Inc. Microsoft, Internet Explorer, Windows, and Windows Server are either

trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

September 2007 P/N CM391 Rev. A00

Contents 3

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Naming Convention . . . . . . . . . . . . . . . . . . . . 6

Configuring Your NAS System . . . . . . . . . . . . . . . 7

Configuring Your System Using a Keyboard,

Monitor, and Mouse . . . . . . . . . . . . . . . . . 7

Configuring Your System For Network Access . . . . 7

Configuring the Network IP Address

for the NAS System . . . . . . . . . . . . . . . . . . 8

Entering the Default Administrator

User Name and Password . . . . . . . . . . . . . . 9

Localizing Your System Using the Multilanguage

User Interface . . . . . . . . . . . . . . . . . . . . . . . 9

Starting the Windows Storage Server

Management Console . . . . . . . . . . . . . . . . . . 10

Accessing the Microsoft Management Console . . . . 10

Accessing the MMC Locally on the Host. . . . . . 10

Accessing the MMC Using Remote Desktop

Connection . . . . . . . . . . . . . . . . . . . . . 11

4Contents

Dell OpenManage Server Administrator . . . . . . . . 12

Installing OpenManage Server Administrator . . . 12

Accessing OpenManage Server Administrator . . 13

Adding Trusted Sites to Your Browser . . . . . . . 13

Updating Your System. . . . . . . . . . . . . . . . 14

Updating Your Microsoft Windows Software . . . 14

Other Documents You May Need . . . . . . . . . . . . 15

Getting Started Guide 5

This document provides an overview of the Microsoft

Windows

Storage Server 2003 R2 x64 Edition with SP2 operating system and information

about configuring, localizing, and installing your Dell™ Network Attached

Storage (NAS) system on a corporate network.

The following topics are covered in this document:

• Overview

• Naming Convention

• Configuring your NAS system

• Localizing your system using the Multilanguage User Interface (MUI)

• Starting the Windows Storage Server Management Console

• Accessing the Microsoft Management Console (MMC)

• Dell OpenManage

™

Server Administrator

• Other documents you may need

Overview

The Windows

Storage Server 2003 R2 x64 Edition with SP2 operating system

adds new search capabilities, simplified setup and storage management,

extensibility, and is specially tuned to provide optimal NAS performance.

Windows Storage Server 2003 R2 x64 Edition with SP2 provides significant

enhancements in storage management scenarios, and ease of installation.

Your NAS system is preconfigured with the Windows

Storage Server 2003 R2

x64 Edition with SP2 operating system. Most of the setup procedures are

completed for you and do not require user intervention.

When your system boots for the first time, the

Microsoft Mini Setup

process

begins. When completed, your system automatically reboots and you can access

the server either locally or remotely.

NOTE: If your system is pre-configured with software redundant array of

independent disks (RAID) 5, the system performs a RAID synchronization to optimize

the array. The process runs in the background and may affect your overall system

performance until it completes. If the system is powered off before the process

completes, RAID synchronization will begin again when the system is powered up

and continue until it completes.

6Getting Started Guide

Naming Convention

The term

Dell PowerVault™ 100

refers to the hardware platform.

PowerVault NF100

refers to the configuration of PowerVault 100 storage system

and Microsoft Windows Storage Server 2003 R2 with SP2 operating system.

The term

Dell PowerVault 500

refers to the hardware platform.

PowerVault NF500

refers to the configuration of PowerVault 500 storage system

and Microsoft Windows Storage Server 2003 R2 with SP2 operating system.

The term

Dell PowerVault 600

refers to the hardware platform.

PowerVault NF600

refers to the configuration of PowerVault 600 storage system

and Microsoft Windows Storage Server 2003 R2 with SP2 operating system.

Figure 1-1. Naming Convention

PowerVault NF100 PowerVault NF500 PowerVault NF600

Microsoft Windows

Storage Server 2003

R2 with SP2

Microsoft Windows

Storage Server 2003

R2 with SP2

Microsoft Windows

Storage Server 2003

R2 with SP2

PowerVault 100

storage system

PowerVault 500

storage system

PowerVault 600

storage system

Getting Started Guide 7

Configuring Your NAS System

Configuring Your System Using a Keyboard, Monitor, and Mouse

NOTE: Depending on your method of configuration, local keyboard, video, and

mouse (KVM) connections may be required to complete the installation and

configuration procedures. If your remote system can complete the configuration

procedures, local KVM connections are not required for operation.

Connect a keyboard, monitor, and mouse to the NAS system.

For information about system connectors, see your system’s

User’s Guide

Turn on the NAS system.

NOTE: The default administrator user name is administrator

and the default password is storageserver

Configuring Your System For Network Access

If your NAS system is powered on, turn it off.

Connect one end of an Ethernet cable into one of the 10/100/1000 RJ-45

NIC connectors (see Figure 1-2) on the back of your NAS system.

For more information about the location of system connectors, see your

NAS system’s

User’s Guide

Connect the other end of the Ethernet cable to a functioning Ethernet jack.

Turn on the NAS system.

Verify that the server is connected to the Ethernet by ensuring that the

LED associated with the network interface controller (NIC) connector

is on. See Figure 1-2. If the NIC connector’s LED is a steady green color,

then the connection is good. If the NIC connector’s LED is a flashing

amber color, then data is successfully being transferred.

If the LED is not on, ensure that each end of the Ethernet cable is seated

properly in the NIC connector and the Ethernet jack.

The NAS system retrieves the required information to set up network

parameters (the IP address, gateway subnet mask, and DNS server address)

from a

Dynamic Host Configuration Protocol (

DHCP) server on the network.

NOTE: Depending on your configuration and the amount of storage attached

to the NAS system, it may take several minutes for the NAS system to boot.

8Getting Started Guide

Figure 1-2. NIC Connector

Configuring the Network IP Address for the NAS System

If you have a DHCP server on your network, you are not required to configure

your NAS system’s IP address because DHCP automatically assigns an address

to the NAS system. If your network is not configured with a DHCP server,

configure the NAS system’s IP address through the

Network Configuration

window.

To access the

Network Configuration

window, click

Start

→

Settings

→

Control

Panel

→

Network Configuration

NOTE: If you do not have a DHCP server on your network, a local keyboard,

monitor, and a mouse is required to complete your NAS configuration. For more

information, see "Configuring Your System Using a Keyboard, Monitor, and Mouse"

on page 7.

NOTE: The Windows Firewall is enabled by default. When you access the remote

system, you may experience issues with connectivity.

1 NIC 1 LED 3 NIC 1

2 NIC 2 LED 4 NIC 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dell Lagerung Handbücher

Dell

Dell PowerVault MD3200 Series Bedienungsanleitung

Dell

Dell PowerEdge Express Flash NVMe PCIe SSD Bedienungsanleitung

Dell

Dell PowerVault 132T Installations- und Betriebshandbuch

Dell

Dell AMP01 Bedienungsanleitung

Dell

Dell PowerVault 35F Bedienungsanleitung

Dell

Dell DL1300 Bedienungsanleitung

Dell

Dell SCv2080 Bedienungsanleitung

Dell

Dell PowerVault DL2000 Bedienungsanleitung

Dell

Dell DX6000 Handbuch

Dell

Dell PowerVault 05CPW Bedienungsanleitung

Dell

Dell PowerVault 100T Bedienungsanleitung

Dell

Dell PowerVault 700N Service-Handbuch

Dell

Dell PowerVault DL2200 CommVault Gebrauchsanweisung

Dell

Dell PowerVault MD3260 Series Bedienungsanleitung

Dell

Dell SC180 Bedienungsanleitung

Dell

Dell Axim 500GB Portable External Hard Drive USB... Bedienungsanleitung

Dell

Dell Express Flash NVMe PCIe SSD U.2 Bedienungsanleitung

Dell

Dell PowerVault ML6000 Betriebsanleitung

Dell

Dell PowerVault 0JC276A02 Bedienungsanleitung

Dell

Dell PowerVault ML6000 Bedienungsanleitung

Dell

Dell PowerVault TL2000 Montage- und Bedienungsanleitung

Dell

Dell PowerVault 130T DLT Bedienungsanleitung

Dell

Dell PowerVault LTO4-EH1 Bedienungsanleitung

Dell

Dell PowerVault 735N Leitfaden

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung