Delta OHM HD21ABE17 Bedienungsanleitung

Operating manual

Q MONITOR

HD21ABE17

www.deltaohm.com

English

Keep for future reference.

HD21ABE17 - 2- V2.0

INDEX

INTRODUCTION ........................................................................................................................................................3

THE USER INTERFACE ...........................................................................................................................................6

DISPLAY.........................................................................................................................................................................6

KEYBOARD.....................................................................................................................................................................7

OPERATION.................................................................................................................................................................9

“►/UNIT”KEY FOR THE UNIT OF MEASUREMENT .....................................................................................................9

MAXIMUM,MINIMUM AND AVERAGE VALUES OF THE CAPTURED QUANTITIES.........................................................10

INSTRUMENT SETUP....................................................................................................................................................11

START OF A NEW LOGGING SESSION.........................................................................................................................11

MAIN MENU ...............................................................................................................................................................12

INFO MENU..................................................................................................................................................................12

LOGGING MENU ..........................................................................................................................................................14

LOG INTERVAL.............................................................................................................................................................14

AUTO POWER OFF –AUTO POWER OFF MODE........................................................................................................15

START/STOP LOG –AUTOMATIC START ..................................................................................................................16

CANCEL AUTO-START.................................................................................................................................................17

LOG FILE MANAGER....................................................................................................................................................18

SERIAL MENU (SERIAL COMMUNCIATION)...............................................................................................................21

PRINT INTERVAL..........................................................................................................................................................21

SETTINGS ....................................................................................................................................................................22

CONTRAST ...................................................................................................................................................................22

BACKLIGHT..................................................................................................................................................................22

LANGUAGE...................................................................................................................................................................23

CALIBRATION...........................................................................................................................................................24

CO2CALIBRATION ......................................................................................................................................................24

COCALIBRATION........................................................................................................................................................27

RH CALIBRATION........................................................................................................................................................30

CONNECTION TO A PC.........................................................................................................................................33

STORING AND TRANSFERING DATA TO A PC ...........................................................................................................34

LOGGING FUNCTION...................................................................................................................................................34

CLEARING THE MEMORY..............................................................................................................................................35

PRINT FUNCTION.........................................................................................................................................................35

INSTRUMENT SIGNALS AND FAULTS .........................................................................................................36

BATTERY SYMBOL – MAINS POWER SUPPLY.........................................................................................37

BATTERIES RECHARGING............................................................................................................................................37

NOTES FOR THE BATTERIES USE................................................................................................................................38

REPLACEMENT OF THE BATTERY PACK .......................................................................................................................38

BATTERIES DISPOSAL.................................................................................................................................................38

INSTRUMENT STORAGE......................................................................................................................................39

SAFETY INSTRUCTIONS.....................................................................................................................................40

TECHNICAL CHARACTERISTICS.....................................................................................................................41

REPLACEMENT OF THE BATTERY PACK .......................................................................................................................42

ORDERING CODES .................................................................................................................................................44

HD21ABE17 - 3- V2.0

INTRODUCTION

HD21ABE17 IAQ Monitorsis a portable instrument for the analysis of indoor air

quality (IAQ, Indoor Air Quality).

The instrument simultaneously measures the following parameters: CO2 Carbon

Dioxide, CO Carbon Monoxide, Atmospheric Pressure, Temperature and

Relative Humidity, and it calculates Dew Point, Wet Bulb Temperature,

Absolute Humidity, Mixing Ratio and Enthalpy.

HD21ABE17 is a data logger with a memory capacity of 67600 recordings, divided in

64 blocks. It uses the DeltaLog10 software.

Reference Standards: ASHRAE 62.1, Legislative Decree 81/2008. These

regulations apply to all confined spaces that could be used by people. Kitchens, baths,

changing rooms and swimming pools are included, due to their high humidity. You

should take into account, in regard to air quality, possible chemical, physical and

biological contaminants.

The instrument has a wide Dot Matrix graphic display with a resolution of 160 x 160

dots.

The instruments typical applications are:

•Measurement of IAQ (Indoor Air Quality) and comfort conditions in schools,

offices and indoor spaces.

•Analysis and study of the Sick Building Syndrome, and of the resulting

consequences.

•Checking the HVAC (Heating, Ventilation and Air Conditioning) system

efficiency.

•Examination of IAQ conditions in factories to optimize microclimate and improve

productivity.

•Building Automation checks.

HD21ABE17 - 4- V2.0

HD21ABE17 - 5- V2.0

1. Backlit graphic display.

2. ESC key: It allows to exit from the menu or, in case of a submenu, to exit from

the current level display.

3. Navigation key ▲: It allows navigation through the menus. During normal

operation, it is used to select the resetting of the statistical data and to scroll the

displayed quantities upwards.

4. Navigation key ◄/Func: It allows navigation through the menus. In normal view,

it allows to display the statistical data: maximum, minimum, and average.

5. MEM key: It allows to start and end the recording of data (logging).

6. Navigation key ▼: It allows navigation through the menus. During normal

operation, it is used to cancel the resetting of the statistical data and to scroll the

displayed quantities downwards.

7. MENU key: It allows to enter and exit the instrument’s functioning parameter

setting menu.

8. Navigation key ►/ Unit: It allows navigation through the menus. During normal

operation, it changes the unit of measurement of the displayed main quantity.

9. ENTER key: In the menu, it confirms the data entered. In normal view, it allows to

reset the statistical data.

10.ON/OFF-Auto Off key: It turns the instrument on and off. When pressed together

with the ESC key, it disables the automatic turn off.

11.USB serial port (mini-USB connector).

12.Power supply input.

13.Temperature-Humidity sensors.

HD21ABE17 - 6- V2.0

THE USER INTERFACE

The user interface consists of a backlit LCD graphic display, and the power-on and

setting keys. When battery powered, and not pressing any key, the backlight turns off

after about 1 minute. To turn it back on, press any key. When using an external

power supply, the backlight is always on. Turn the instrument on and off with the

ON/OFF key. When you turn the instrument on, the logo and model will be displayed

for a few seconds, and then the main display.

The quantities detected by the instrument can be viewed with a larger character size,

at the top of the display. The parameter displayed with a larger character is called

main quantity. In order to select the parameter to be displayed as main quantity,

use the ▲▼ keys. For some quantities, you can select the unit of measurement;

temperature can be displayed as °C or °F.

DISPLAY

HD21ABE17

2010/02/10 08:00:00

Carbon Dioxide

CO2

600

ppm

CO 0 ppm

Patm 1000 hPa

RH 25.0 %

T 17.0 °C

1. Battery’s charge status and instrument code. In case the logging function is

on, this line shows the current logging number and the time elapsed from logging

start.

2. Main quantity (in this case, CO2Carbon Dioxide).

3. Display of all other quantities.

4. Current date and time.

The detected and computed quantities are:

CO2

Carbon Dioxide

ppm

Carbon Monoxide

ppm

Relative Humidity

Temperature

°C – °F

Patm

Atmospheric Pressure

hPa

Dew Point

°C – °F

Wet Bulb Temperature

°C – °F

Absolute Humidity

g/m3

Mixing Ratio

g/kg

Enthalpy

kJ/kg

HD21ABE17 - 7- V2.0

KEYBOARD

The keys on the instrument perform the following functions:

ON-OFF/AUTO-OFF key

It turns the instrument on and off.

When turning the instrument on, the first screen will be displayed. After few seconds

the measured quantities will be displayed.

Auto Power Off

The instrument has an AutoPowerOff function that automatically turns the instrument

off after about 8 minutes if no key is pressed. The AutoPowerOff function can be

disabled by holding the ESC key pressed down when turning the instrument on: the

symbol will appear on the first line to remind the user that the instrument can only be

turned off by pressing the ON/OFF key.

The AutoPowerOff function is disabled when:

•External power is used.

•During data download.

•During logging.

MENU key

It allows to enter to and exit from the instrument’s functioning parameter setting

menu.

ENTER key

In the menu, it confirms the entered data.

During normal operation it confirms the resetting of the statistical data.

ESC key

It allows to exit from the menu or, in case of a submenu, to exit from the current level

display.

MEM key

It allows to start and end a “logging” session; the data sending interval must be set in

the menu.

HD21ABE17 - 8- V2.0

Key ◄/FUNC

◄allows navigation through the menus.

FUNC: In normal view, it allows to select the statistical data: maximum, minimum,

and average.

Key ▲

It allows navigation through the menus. During normal operation, it is used to select

the resetting of the statistical data and to scroll the displayed quantities.

Key ▼

It allows navigation through the menus. During normal operation, it is used to cancel

the resetting of the statistical data and to scroll the displayed quantities.

Key ►/UNIT

It allows navigation through the menus.

During normal operation, it changes the unit of measurement of the main quantity.

If the main quantity is Relative Humidity by repeatedly pressing the UNIT key you

can display the following quantities:

Relative Humidity (%)

Dew Point (°C - °F)

Absolute Humidity (g/m3)

Mixing Ratio (g/kg)

Wet Bulb Temperature (°C - °F)

Enthalpy (kJ/kg)

If the main quantity is Temperature by repeatedly pressing the UNIT key you can

display the temperature in °C (Celsius degrees) or °F (Fahrenheit degrees).

HD21ABE17 - 9- V2.0

OPERATION

During turning on, the following message is displayed for about 10 seconds:

Model HD21ABE17

Indoor Air Quality

Firm.Ver.=01.00

In addition to the Delta OHM logo, the instrument code and the firmware

version are displayed.

After about 10 seconds, the measurements will appear on the display:

HD21ABE17

2010/02/10 08:00:00

Carbon Dioxide

CO2

600

ppm

CO 0 ppm

Patm 1000 hPa

RH 25.0 %

T 17.0 °C

“►/UNIT”KEY FOR THE UNIT OF MEASUREMENT

It allows navigation through the menus. During normal operation, it changes the unit

of measurement of the main quantity.

If the main quantity is Relative Humidity, by repeatedly pressing the UNIT key you

can display the following quantities:

Relative Humidity (%)

Dew Point (°C - °F)

Absolute Humidity (g/m3)

Mixing Ratio (g/kg)

Wet Bulb Temperature (°C - °F)

Enthalpy (kJ/kg)

If the main quantity is Temperature by repeatedly pressing the UNIT key, you can

display the temperature in °C (Celsius degrees) or °F (Fahrenheit degrees).

HD21ABE17 - 10 - V2.0

MAXIMUM,MINIMUM AND AVERAGE VALUES OF THE CAPTURED QUANTITIES

By pressing the ◄/FUNC key you can display the maximum, minimum, average

(AVG) or average in 1-minute (AVG 1min) values of the measured quantities.

To reset the statistical data (except for AVG 1min function) press the ◄/FUNC key

until the “Reset? Yes No” message appears. Select Yes using the ▲▼keys and confirm

with ENTER.

Once selected, for example max, all displayed quantities indicate the maximum value.

The AVG average is calculated on the first five minutes of samples, and then

on the current average.

THE AVERAGE IN 1MINUTE FUNCTION

By pressing the ◄/FUNC key you can select the AVG 1min (Average in 1 minute)

function:

Function: AVG 1min

READY 00:00:60

Carbon Dioxide

CO2

600

ppm

CO 0 ppm

Patm 1000 hPa

RH 25.0 %

T 17.0 °C

If the function is selected, the " READY 00:00:60 " indication on the LCD blinks to

prompt the user to start the 1-minute average calculation of the acquired values.

To start the calculation, press the ENTER key. The " RUNNING " indication and a

countdown will appear on the display. During calculation, the instrument continuously

emits one short beep per second.

Function: AVG 1min

RUNNING 00:00:48

Carbon Dioxide

CO2

600

ppm

CO 0 ppm

Patm 1000 hPa

RH 25.0 %

T 17.0 °C

After 1 minute the instrument emits one long beep and displays the calculated

average on the LCD.

Inhaltsverzeichnis

Andere Delta OHM Monitor Handbücher

Delta OHM

Delta OHM HD37AB1347 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung