EMC COMPLIANCE
This device has been tested and found to comply with the standards for a class B
digital device, pursuant to Part 15 of FCC Rules. Those standards are designed to
provide reasonable protection against harmful interference in a residential installation.
This device generates and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
If this device does cause harmful interference to radio or television reception, which
can be determined by turning the device off and on, user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
—Increase the separation between the device and receiver
・—Plug the device into a wall outlet different from that connected to the receiver.
…Consult the dealer or an experienced radio/TV technician for help.
CAUTION: any change or modification not expressly illustrated in this manual
may void the warranty.
NOTE: any unshielded cable is not allowed to be used in the device!
IMPORTANT PRECAUTIONS
A WARNINGS:
1. Before using this device, please read all the instructions in this manual carefully.
2. Please keep the manual carefully for future reference.
3. Unplug this device from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp or wet cloth to clean. Please use LCD screen detergent
for cleaning if it is still dirty.
4. Do not use the parts not recommended by the manufacturer, otherwise it may cause
a hazard.
5. When unplugging the power cord of the monitor or adapter, please hold the plug
with your hand, do not pull the cord directly.
6. Do not place any object on the power cord. Do not trample it either.
7. Do not use the device near water sources, e.g. bathtub, basin, kitchen sink, or
washing machine. Do not place the device on a wet floor, or near a swimming pool
etc. Do not touch the screen with your fingers or other hard objects.
8. Slots and openings on the housing and its back or bottom are provided for
ventilation, lb ensure reliable operation of the components and to protect them from
overheating, these openings must not be blocked or covered placing the device on a
bed, sofa, rug, or other similar surface. The device should never be placed near or over
a radiator or heater and should not be placed in a built-in installation unless proper
ventilation is provided.
9. Make sure that the device is at least 5cm distance from the wall or other objects
around when it is in use.
10. The power supply must respond to that stated on the rating plate. If you have any
query about the power supply, please refer to the dealer or local power supply
provider.
11. As a safeguard measure, the monitor or adapter is equipped with a power cord
with three-terminal plug, the third terminal is grounded. If the plug cannot be inserted
into the outlet, please contact an electrical technician for replacing the original outlet
while keeping the safeguard measure in effect.
12. Ensure that the power socket and cord in use are able to take the sum of the rated
currency of all the products.
13. Do not put the device at the place where user is subject to mal-operation.
14. Observe all the warnings and instructions described in the manual.
15. Do not overload the power outlet or use any extension cord, otherwise it may
cause fire or electric shock.
16. Do not attempt to repair this device yourself since opening or removing covers
may expose you to dangerous voltage or other hazards. Refer servicing to qualified
