Delta MS300 Series Bedienungsanleitung

MS300/MH300

CMM-PN02 PROFINET

Communication Card Operation Manual

Application Drive Firmware Version: MS300 V2.02 / MH300 V2.00 or above

CMM- PN02 Comm. Card Firmware Version: V1.00 or above

20230811

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02 Operation Manual

Caution

This operation manual provides information on specifications, installation instructions, basic

operations/configurations, and details on network communication protocols.

The AC motor drive is a sophisticated product powered by electricity. For the safety of the

operator and your mechanical equipment, only qualified electrical engineers can perform the

installation/test runs and make parameter adjustments. If you have any question or concern,

please contact your local Delta distributor. Our professional staff will be very glad to help you.

Please read this manual carefully and follow the instructions completely to avoid device

damage or personal injury.

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02Operation Manual

Table of Contents

1Introduction .......................................................................................................................4

1.1 Introduction to PROFINET IO Communication ....................................................................4

1.2 Features .............................................................................................................................4

1.3 Network Functions and Specifications.................................................................................4

2Product Appearance and Components ...........................................................................6

2.1 Exterior Dimensions............................................................................................................6

2.2 Introduction to Each Component.........................................................................................6

2.3 LED Indicators ....................................................................................................................7

2.4 Definition of RJ45 Pin .........................................................................................................7

2.5 MAC Address Definition ......................................................................................................8

3Installation and Wiring ......................................................................................................9

3.1 Mounting Position of Communication Cards........................................................................9

3.2 Communication Cable.......................................................................................................10

3.3 MS300 Installation ............................................................................................................11

3.4 MH300 Installation ............................................................................................................13

3.5 Connecting to the Network................................................................................................16

4MH300/MS300 Drive Settings .........................................................................................17

5PROFINET Communication Profile ................................................................................18

5.1 Profinet comm. card info. (Identification & Maintenance functions (I&M))..........................18

5.2 MS300/MH300 real-time data access method(List of control words and status words) .....19

5.3 Motor Drive Handling when Disconnection........................................................................21

6Connection Configuration to Host Controller...............................................................23

6.1 Basic Configuration...........................................................................................................23

6.2 Speed Mode DEMO (S7-300 + STEP 7) ...........................................................................28

6.3 Speed Mode DEMO (S7-1500 + TIA PORTAL) .................................................................38

6.4 Demonstration of Reading/Writing Synchronous and Asynchronous Parameters

(S7-300 + TIA PORTAL)............................................................................................................48

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02 Operation Manual

1 Introduction

1.1 Introduction to PROFINET IO Communication

PROFINET IO is a fieldbus, a family of industrial computer network protocols, and serves

as a communication between programmable logic controllers (PLC) and distributed field

equipment for EtherNet. This protocol recognizes three classes of devices, IO

Controllers, IO Supervisors and IO Devices, and uses three different communication

channels to exchange data: Standard UDP/IP & TCP/IP Channel, Real-Time (RT)

Channel, and Isochronous Real-Time (IRT) Channel. Standard UDP/IP & TCP/IP

Channel is used to parameterize and configure device and asynchronous operation; RT

Channel is used for synchronous data transmission and warning; IRT Channel is

applied to motion control.

1.2 Features

CMM-PN02 connects MS300/MH300 drive to PROFINET to exchange data with the host

controller easily. This simple network solution saves cost and time for connection and

installation of factory automation. Moreover, its components are compatible with

suppliers’.

By installing CMM-PN02 in MS300/M300 through the main PROFINET device, you can:

1. Control the drive through PROFINET

2. Modify the drive’s parameters through PROFINET

3. Monitor the drive’s status through PROFINET

1.3 Network Functions and Specifications



EtherNet Specifications

Item Specifications

Interface RJ45

Number of ports 2 ports

Communication

Mode

IEEE 802.3

Cable Category 5e shielding 100 M

Transmission

speed

10/100 Mbps auto-negotiate

Communication

protocol

PROFINET



Environmental Conditions

Item Specifications

Noise immunity

ESD (IEC 61800-5-1, IEC 6100-4-2)

EFT (IEC 61800-5-1, IEC 6100-4-4)

Surge Test (IEC 61800-5-1, IEC 6100-4-5)

Conducted Susceptibility Test (IEC 61800-5-1, IEC 6100-4-6)

Operating

temperature

-10–50°C (temperature), 90% (humidity)

Storage

temperature

-25–70°C (temperature), 95% (humidity)

Vibration/Shock

resistance

International standards

IEC 61800-5-1, IEC 60068-2-6/IEC 61800-5-1, IEC 60068-2-27

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02Operation Manual



Electrical Specifications

Item Specifications

Power supply

voltage

5 VDC

Power

consumption

0.8 W

Insulation voltage 500 VDC

Weight

(g; approx.)

27 (g)

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02 Operation Manual

2 Product Appearance and Components

2.1 Exterior Dimensions

Unit: mm [inch]

2.2 Introduction to Each Component

1. Screw fastening hole 9.

Link PHY2 indicator (Port 2)

2. Positioning hole for communication card 10.F/W indicator

3. Control Panel connection port 11. D/B indicator

4. RJ45 connection port (Port 2) 12. PE grounding terminal

5. RJ45 connection port (Port 1)

6. BF out indicator

7. Ready out indicator

8. Link PHY1 indicator (Port 1)

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02Operation Manual

2.3 LED Indicators

Name Indicator Status Indication

BF indicator Red LED

Always on

Disconnected with PROFINET Controller

Flashing

Normal connection, but abnormal

communication with PROFINET

Controller.

Off

Normal connection with PROFINET

Controller

RDY indicator Red/Green

LED

Always orange

Fault found on the Profinet comm. card.

Flashing

Profinet communication card is activating.

Always green

No fault found.

L/A1 indicator Green LED

Always on L/A1 has network signal.

Flashing L/A1 is handshaking data.

Off L/A1 doesn’t have network signal.

L/A2 indicator Green LED

Always on L/A2 has network signal.

Flashing rL/A2 is handshaking data

Off L/A2 doesn’t have network signal.

2.4 Definition of RJ45 Pin

RJ45 Pinout

Diagram

PIN Definition Description

1 Tx+ Positive pole for data transmission

2 Tx- Negative pole for data transmission

3 Rx+ Positive pole for receiving data

4 -- N/C

5 -- N/C

6 Rx- Negative pole for receiving data

7 -- N/C

8 -- N/C

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02 Operation Manual

2.5 MAC Address Definition

Definition Description

MAC1 Port 1 MAC Address

MAC2 Port 2 MAC Address

MAC3 Interface MAC Address

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02Operation Manual

3 Installation and Wiring

This section introduces how CMM-PN02 connects to MS300/MH300 and to network.

3.1 Mounting Position of Communication Cards

MS300 Mounting Position of Communication Card

Frame A–D Frame E and F

(Option card mounting box)

Fig. 3-1 Fig. 3-2

MH300 Mounting Position of Communication Card

Frame A–D (Option card mounting box) Frame E and F

(Option card mounting box)

Fig. 3-3 Fig. 3-4

MS300/MH300 PROFINET Communication Card CMM-PN02

CMM-PN02 Operation Manual

3.2 Communication Cable

Three types of cable length are available. As shown in the Fig.3-5, there are

numbers on two ends of the communication cable near the connector. The

connection methods of the communication card for different frames are shown in the

table below. Read the descriptions and numbers on the cables before wiring.

Frame

Mounting Position 1 Mounting Position 2

Connect to

control board

connector

Connect to

communication

card connector

Connect to

control board

connector

Connect to

communication

card connector

Fig. 3-5

Andere Handbücher für MS300 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta Konferenzsystem Handbücher

Delta

Delta NovoPRO Bedienungsanleitung

Delta

Delta DVP EN01-SL Bedienungsanleitung

Delta

Delta CMC-EC01 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung