Delta AH500 series Bedienungsanleitung

Chapter 1 Introduction

Table of Contents

1.1 Manuals.....................................................................................................1-2

1.2 System Frameworks..................................................................................1-3

1.3 Operation of the CPU module ...................................................................1-9

1-1

AH500 Quick Start

1.1 Manuals

Delta Electronics, Inc. provides users with the manuals related to the AH500 series programmable

logic controllers according to different application requirements.

AH500 Hardware Manual: It introduces hardware specifications, addressing, wiring, maintenance,

troubleshooting, and etc.

AH500 Operation Manual: It introduces the configuration of the hardware, the setting of the

connection, the operation of the CPU module, the setting of the software,

and etc.

AH500 Programming Manual: It introduces devices and instructions.

AH500 Module Manual: It introduces module specifications, installation, setting, troubleshooting,

and etc.

AH500 Motion Control Module Manual: It introduces the specifications for the motion control

modules, the wiring, the instructions, and the functions.

ISPSoft User Manual: It introduces the use of ISPSoft, including the variables, the connection, the

programs, and the function blocks.

PMSoft User Manual: It introduces the use of PMSoft, including the editing mode, the connection,

and the encryption.

AH500 Quick Start: It helps users create and use the system in a short time.AH500 Quick Start not

only introduces the basic system frameworks, but also teaches users to write a

program step by step by means of simple examples, and download the program

which includes the variables and the function blocks to the CPU module. Users

can experience the convenience brought by the new functions. If an error

occurs when the system runs, please refer to section 3.3.2 for more information

about debugging the program. (Please refer to chapter 12 in AH500 Operation

Manual for more information about the troubleshooting.)

The graphic representations in the manual

Graph Significance

Clicking the left mouse button

Clicking the right mouse button

Double-clicking the left mouse button

Pressing and holding the left mouse button, and then moving the mouse without

releasing the button.

Typing with a keyboard

Operating sequence (The graphic representation is used when the operating sequence

is mentioned. For example, and .)

Number used with a picture

1-2

Chapter 1 Introduction

1.2 System Frameworks

The AH500 series programmable logic controller is a medium type of programmable logic control

system. The execution speed and the memory capacity are increased. Besides, the complete

program development function of function blocks is supported. In order to meet users’ more

advanced application requirements, the AH500 series programmable logic controllers provide more

flexible system extension frameworks. Under such system frameworks, users do not need to use

several CPU modules to control the system because of the fact that there are too many I/O points or

the equipment is too far away. The completeness of the system is retained, and users can be more

efficient in developing the projects.

The minimum framework requirement for theAH500 system:

To create the AH500 system, one main backplane, one power supply module, and one CPU module

are needed for the operation of the CPU module.

Main backplane (four-slot AHBP04M1-5A)

CPU module

Power supply

module

The common framework of theAH500 system (for original equipment manufacturers):

The AH500 system can meet most equipment development requirements in the application field of

original equipment manufacturers. Generally speaking, one eight-slot main backplane or one

twelve-slot main backplane is chosen. Some advanced equipment can be used with a six-slot

extension backplane or an eight-slot extension backplane under the original framework to increase

the number of I/O points and the number of axes, or decrease the wiring cost.

The framework: Rack 1~rack 8

7backplanes

．

1-3

AH500 Quick Start

The configuration is as follows.

Power supply

CPU module

Rack 1 (eight-slot main backplane)

Rack 2 (eight-slot extension backplane)

ht racks at most

Motion control module

Network module

Motion control module

Power supply

Digital input module

Digital output module

Analog input module

Temperature

measurement module

Serial communication

module

Note: Owing to the consideration to the data transmission speed, the motion control modules and

the network modules (exclusive of the serial communication modules) have to be installed

with the CPU module on the same backplane. Otherwise, the system can not operate

properly.

The common framework of theAH500 system (for system integration):

The AH500 system can meet most system control requirements in the application field of the system

integration. Generally speaking, the system framework is related to the positions of the equipments.

A control panel is usually placed among the equipments which are concentrated to save the wiring

cost. However, there is usually more than one concentration point, and the distance between the

concentration points is over 100 meters. If it is necessary for users to place more than two control

panels, the RTU modules are required. The remote framework of theAH500 system not only fills the

remote requirement, but also is combined with the extension of the local I/O. Under most conditions,

a control panel instead of a backplane can be regarded as a remote I/O station. In addition, the

backplanes, the power supply modules, and other modules are compatible with one another. The

convenience of planning the system is increased, and the difficulty of choosing the products is also

decreased.

1-4

Chapter 1 Introduction

System framework: Rack 1~rack 8+RTU modules

．

．．．

Remote I/O

7 backplanes 7 backplanes

Note: Users are provided with the special cables to connect the extension backplanes. The length of

a special cable can be up to 100 meters. They are also provided with the fiber cables which

are used with the special adapters. The length of a fiber cable can be up to 2 kilometers.

1-5

AH500 Quick Start

System planning 1

Control panel

Concentration point

Over 100 meters

Rack 1 (eight-slot main backplane)

Master

Master Slave 1

Control panel

Concentration point

Rack 2 (eight-slot main backplane)

Master

Eight racks at most

Power supply

CPU module

Network module

Digital input module

Remote master

Power supply

Digital output module

Analog input module

Analog output module

Serial communication

module

Slave 1

1-6

Chapter 1 Introduction

System planning 2

Master Slave 1

Control panel

Concentration point Concentration point

Over 100 meters

Rack 1 (eight-slot main backplane)

Slave 1

Eight racks at most

Sixty-three racks at most

(The remote I/O system is

in use.)

Rack 2

(

-slot extension back

lane

)

Slave 1

Power supply Power supply

Analog input module

Analog output module

Serial communication

module

Remote slave

Digital input module

Digital output module

1-7

AH500 Quick Start

System planning 3

Control Panel

設備集中區

Slave 1

Control panel

設備集中區

Slave 2

Control panel

Slave 3

Control panel

設備集中區

Slave 1

Control

anel

設備集中區

Slave 2

Control

anel

Slave 3

Slave 1 Slave 2 Slave 3

Master

Control panel

Concentration point

Master

Note: The remote masters in DeviceNet are the network modules. They have to be installed with the

CPU modules on the same backplane.ACPU module can support eight masters, and a

master can be connected to sixty-three slaves. Besides, a slave can be connected to seven

1-8

Chapter 1 Introduction

extension backplanes at most.

1.3 Operation of the CPU module

The CPU module is the nucleus of the AH500 system. It is responsible for not only the execution of

the logic program, but also the data exchange and the processing of the communication data. The

relation between the AH500 system and the external devices are illustrated below.

System

operation

I/O

refresh

Program

operation

Input module

Output module

CPU module

AH500 system

Switch Relay

C motor

drive

Temperature

Pressure Electric

valve

External input

device External output

device

The operation of the CPU module is illustrated above. The system procedures related to the

initialization, the diagnosis, and the communication, and the program procedures related to the

external interrupts and timed interrupts are simplified. Users can refer to other manuals for more

information. The operation of the CPU module is described below.

1-9

Andere Handbücher für AH500 series

Inhaltsverzeichnis

Andere Delta Controller Handbücher

Delta

Delta ASDA-A2 Series Bedienungsanleitung

Delta

Delta DVP-ES2 Bedienungsanleitung

Delta

Delta DVP08SM11N Bedienungsanleitung

Delta

Delta ASD-B2-0121-B Bedienungsanleitung

Delta

Delta DVP-20PM Bedienungsanleitung

Delta

Delta 5CN-220T Series Bedienungsanleitung

Delta

Delta AH Series Bedienungsanleitung

Delta

Delta DVP14ES00R2 Bedienungsanleitung

Delta

Delta PBC Series Bedienungsanleitung

Delta

Delta DZNT-104T Bedienungsanleitung

Delta

Delta NC10EB Bedienungsanleitung

Delta

Delta DVP-EH2 Series Bedienungsanleitung

Delta

Delta ASC2204C-H Bedienungsanleitung

Delta

Delta DAC-606 Bedienungsanleitung

Delta

Delta AH500 series Bedienungsanleitung

Delta

Delta DVP-EH Bedienungsanleitung

Delta

Delta AH500 series Betriebsanleitung

Delta

Delta VFD-E Bedienungsanleitung

Delta

Delta 2SPA Bedienungsanleitung

Delta

Delta RMC200 Benutzerhandbuch

Delta

Delta DVP-ES3 Series Bedienungsanleitung

Delta

Delta DVP-SS2 Bedienungsanleitung

Delta

Delta 29FWC-100E Bedienungsanleitung

Delta

Delta DVP-MC Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch