Delta R3E Bedienungsanleitung

The power behind competitiveness

Delta Power Monitor

Installation Manual

R3E (for commercial use only.)

www.deltaww.com

Contents

■Introduction■

Precautions for Your Safety

Essential Points for Safety

Precautions for Use

１.Preparation before construction

１.１Scope of Delivery

１.２Dimension

１.３Descriptions and Functions of Parts and Components

２.Installation

２.１Installation order

２.２System Diagram

３.Setting

３.１Setting the Communications Unit

３.２Setting Power Monitor and Cable

４.Default Settings

４.１Connection

５.Installation Method

５.１Wall Installation

５.２Desktop Installation

５.３Wiring access

６.Description of the screen display

６.１Home Screen

６.２Operation Screens

６.３Reset Method

７.Service Mode

７.１Entering or Exiting Service Mode

７.２Exclusive Service Mode Functions

８.When Something Seems Wrong (Troubleshooting)

８.１Error Displays

８.２Troubleshooting

９.Specifications

９.１Power Monitor

This Installation Manual provides precautions with the following notations and symbols for safe

use of the Power Monitor (for commercial use only.) : R3E.

Precautions described herein contain important aspects of safety.

Please observe and follow these descriptions.

Notations and symbols are described below:

Notations for safe use of the product and their meanings

Precautions for Your Safety

Failing to handle the Product properly may result in the described danger

leading to slight or intermediate level injuries and in some cases may also

result in serious injury or death.

Failing to handle the Product properly may result in the described danger

leading to slight or intermediate level injuries or property damages in some

instances.

■ Explanation of graphic symbols

● Electric Shock Precaution

Notifications pertaining to precautions for potential electric shock,

under specific conditions

● General

Unspecified general notifications pertaining to prohibited actions.

● Disassembly prohibited

Notifications pertaining to prohibition of equipment disassembly,

when doing so can potentially lead to injuries such as electric shock.

● General

Unspecified general notifications pertaining to instructions for users

Warning

Caution

Introduction

Do not allow any fire producing objects to be near the Product, or apply any spray,

including combustible gases, to the Product. The Product may ignite or explode in

the unlikely event such an occurrence takes place.

Do not touch the Product with wet hands.

Power Monitor may cause injury due to electric shock or equipment malfunction may

occur in the unlikely event such an occurrence takes place.

Do not install the Product in a place that is subject to significant effects of vibration

and impact. There is danger of injury from the Product falling in some rare cases.

Do not install the Product in the following types of locations:

There is danger of burnout in some rare cases.

・

Locations that are exposed to rain water, such as outdoors or under eaves and the like.

・Locations that are exposed to steam or where the moisture level is 30 to 85% RH,

such as lavatories, changing rooms, work sites, kitchens and the like.

When installing the Power Monitor on a wall made of materials that are not wood,

be sure to acquire plastic anchors available on the market to secure the Wall

Surface/Desktop Mounting Plate on the wall surface. There is danger of injury from

the Product falling in some rare cases.

Warning

Caution

Do not disassemble or modify the Product.

Power Monitor may cause injury or fire due to electric shock in the unlikely event

such an occurrence takes place.

Introduction

Items described below must be followed as they are necessary to secure safety.

1. Request a specialist to dispose of the Product.

2. Pull 6-pin terminal off when any abnormality is detected like smoke, heat.

3. Do not install the Product in any place that is prevented from having air flow, such as inside

closets or under stairs.

4. Install the Product with the “DELTA” logo facing up when installing the Power Monitor on a wall.

When not installed on a wall, set the Product on the Wall Surface/Desktop Mounting Plate when

using the Product.

5. Take care to ensure no water or other liquid gets on the Power Monitor.

6. There is danger of injury. Do not throw the Product.

Essential Points for Safety

Introduction

1. The Product is not a specified measuring instrument that passed any certification criteria of any

designated accreditation organization as prescribed by the Measurement Act. The Product may

only be used to provide a rough indication on the amount of power.

3. The Product may malfunction or may be damaged by static electricity. Be sure to remove any

static electricity on the body, through such means as touching a metal object nearby, prior to

coming into contact with the Product.

2. A touch panel type liquid crystal display has been adopted for the Product. Do not press or hit

hard on the surface of the display.

4. Do not connect a telephone line or household LAN cable to the LAN terminal on the Power

Monitor. There is danger of the Product malfunctioning.

Precautions for Use

5. Reverting the date and time by at least a 15 minute interval into the past will result in the loss of

performance data. Set the date and time correctly.

Example : [A case where performance data is lost]

The time is inadvertently changed from 9:15 to 8:45 and then reverted to 9:15.

The performance data starting from 8:45 onwards are added to the performance data from 8:45

and the performance data for the period since 8:45 is lost. Lost data cannot be restored.

● Time is changed from 9:15 to 8:45.

● Time is changed from 8:45 to 9:15.

Example : [A case where performance data is not lost]

The time is inadvertently changed from 9:28 to 9:18 and then reverted to 9:28.

The performance data from 9:15 is fixed as of 9:30 and as such, the performance data is not lost,

as long as the time change does not extend to at least a 15 minute interval.

●Time is changed from 9:28 to 9:18.

● Time is changed from 9:18 to 9:28.

8:30　　　　8:45　　　　9:00　　　　9:15　　　 9:30

Data is added to that of 8:45.

Performance data is not lost.

Performance data is lost.

8:30　　　　8:45　　　　9:00　　　　9:15　　　 9:30

8:30　　　　8:45　　　　9:00　　　　9:15　　　 9:30 8:30　　　　8:45　　　　9:00　　　　9:15　　　 9:30

Introduction

6. Do not install the product in the following places:

・Do not expose to extreme fluctuation temperature.

・Do not expose to salt air.

・Do not expose to corrosive substances, explosive / flammable GAS, chemicals.

・Do not install in direct sunlight.

・Do not install in a place exceeding the operating temperature range (-20 to +50°C).

・Do not install above 2000m MSL or higher.

・Do not expose to water vapor, oil vapor, smoke, cotton dust, metal powder, sawdust, Warakuzu.

7. Store the Product in a location with the temperature ranging between -20 and +60°C, with the

humidity ranging from 30 to 85% RH.

8. For commercial use, the product can monitor maximum 32 inverters at one time.

9. If installed outdoor, please put it in box which is suitable for outdoor use.

Introduction

１.

Preparation before construction

1.1.Scope of Delivery

Verify that following items are available for use prior to using this feature.

1 unit

1 piece

2 pieces

Product name

Power Monitor

Wall Surface /

Desktop Mounting Plate

Wood screws (+) for Wall Surface /

Desktop Mounting Plate

(dia. 4 x 20 mm)

Shape Qty Remarks

This is a plate used to install

the Product on a wall or on a

desk.

These are wood screws for

the Wall Surface / Desktop

Mounting Plate.

Quick installation guide 1 copy

■ R3E

Preparation before construction

190mm

120mm

32mm

25mm

35mm

58mm

40mm

■ 7-inch Power Monitor

■ Wall Surface / Desktop Mounting Plate

POWERMONITOR

1.2.Dimension

Preparation before construction

1.3.Descriptions and Functions of Parts and Components

POWERMONITOR

■ Power Monitor

Important

Do not connect a telephone line to the LAN terminal.

①LAN terminal (RJ-45 terminal) (fitted with a protective cover)

This is the terminal that is used to connect the system to an internet line. (A setup is required.)

②RS-485 (a 6-pin connect)

This is the connect that is used to connect a 6-pin connector provided, to link the supply of power

and signals from the Inverter.

③Power Supply terminal (fitted with a protective cover)

Not used.

④USB Terminal (for USB 1 and USB 2) (fitted with a protective cover)

Downloading of various data and upgrading of software versions can be performed.

* Customers are requested to procure their own USB memory and USB cable.

⑤Insertion slot for anchoring the Wall Surface Mounting Plate.

This is the insertion slot used to install the Wall Surface / Desktop Mounting Plate when installing

the Product on the wall.

⑥Insertion slot for anchoring the Desktop Mounting Plate

This is the insertion slot used to install the Wall Surface/ Desktop Mounting Plate when installing

the Product on desktop.

⑦Reset button

Restart the Power Monitor. The settings and records will not be deleted.

⑧Wiring access

According to the prescribed wiring method, remove the tab on the wiring access, and guide the

cable through.

⑨Touch Panel section

Displays are switched and various settings are performed by performing touch panel operations.

⑩ Screw hole

For fixing screw of 6-pin terminal.

USB 1

USB 2

CAN-L

CAN-H

RS485-B

RS485-A

GND

+12V

LAN

DC 12V

①

②

③

④

⑥⑤⑦

⑩

⑨ ⑧

⑧

Front Back Side

Preparation before construction

Inhaltsverzeichnis

Andere Delta Monitor Handbücher

Delta

Delta DOP-107H Series Bedienungsanleitung

Delta

Delta UNO-C07X011 Bedienungsanleitung

Delta

Delta DOP-103BQ Bedienungsanleitung

Delta

Delta PPM R1E Installationshandbuch

Delta

Delta Vivitek NovoTouch EK860i Bedienungsanleitung

Delta

Delta DOP-107EV Bedienungsanleitung

Delta

Delta VMT-271 Bedienungsanleitung

Delta

Delta DOP-103BQ Bedienungsanleitung

Delta

Delta Vivitek NovoTouch EK650i Bedienungsanleitung

Delta

Delta UNOlite Bedienungsanleitung

Delta

Delta DOP-107BV Bedienungsanleitung

Delta

Delta IIYAMA-E2483HSU-B5 24 " Bedienungsanleitung

Delta

Delta DOP-100 Series Bedienungsanleitung

Delta

Delta DOP-110CS Bedienungsanleitung

Delta

Delta VMT-173 Bedienungsanleitung

Delta

Delta VMT-221IP Bedienungsanleitung

Delta

Delta TP70P Bedienungsanleitung

Delta

Delta IIYAMA-X2783HSU-B3 Bedienungsanleitung

Delta

Delta Vivitek NovoDisplay DK430 Bedienungsanleitung

Delta

Delta uno next Bedienungsanleitung

Delta

Delta TV-908A Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung