Delta AlertMaxx Handbuch

01992 523523

[email protected]

www.deltamembranes.com

AlertMaxx™

Installation & Operating Instructions Rev 4

For Ground Water (DMS-270) & Foul Water (DMS-269)

Pump Station High Level Alarm

AlertMaxx

AM-M-V4-02.16

Legal information/Copyright

processed for any other purpose, nor otherwise transmitted, published or made available to a third party

without express written consent from Delta Membranes.

Subject to technical modication without prior notice.

AlertMaxx

For technical support, please call 01279 757400 3

Contents

1.0 AlertMaxx overview 4

2.0 Box contents 4

2.1 Cardboard box contents 4

2.2 AlertMaxx unit contents 4

3.0 Technical information 5

4.0 Unit location 5

5.0 Mounting the AlertMaxx unit 5

6.0 Connecting mains power to the AlertMaxx unit 6

7.0 Installing a nger oat into a ground or surface water chamber 7

8.0 Connecting a nger oat to the AlertMaxx unit 8

9.0 Installing a pendant oat into a foul water chamber 9

10.0 Connecting a pendant oat to the AlertMaxx unit 10

11.0 Activating & testing the AlertMaxx unit 11

11.1 Turning on the AlertMaxx unit for the rst time 11

11.2 Testing the AlertMaxx unit 11

12.0 Connecting external devices 12

13.0 Servicing 13

14.0 Spares 13

15.0 LED codes 14

16.0 Troubleshooting 14

1.0 AlertMaxx overview

2.0 Box contents

4 For technical support, please call 01279 757400

AlertMaxx

Ground Water version (DMS-270)

• 1 x Finger Float Switch

• 1 x Blue washer

• 1 x Green washer

• 1 x Securing nut

• 1 x Finger Float Housing

• 3 x Cable Ties

Foul Water version (DMS-269)

• 1 x Pendant Float Switch

• 2 x Cable Ties

2.1 Cardboard box contents

• 2 x Large Cable Glands

• 2 x Large Blanking Plugs

• 2 x Small Cable Glands

• 2 x Small Blanking Plugs

• 1 x 6V Battery

2.2 AlertMaxx unit contents

• 1 x AlertMaxx Unit

• 1 x Chamber Location Sticker Sheet (For AlertMaxx)

• 1 x Chamber Location Sticker Sheet (For Spurs)

• 1 x Installation & Operating Instructions (this document)

This high level alarm is designed to alert home owners when the water level in their pump chamber becomes

too high. The unit will also inform home owners when a service is due on their pump station.

CAUTION!

The AlertMaxx should be installed by a qualied tradesperson.

AlertMaxx

For technical support, please call 01279 757400 5

3.0 Technical information

AlertMaxx Specication

Size (without cable glands) W: 115mm x D: 95mm x H: 60mm

Weight 650g

Mains Supply 200-250V AC (50Hz)

Internal Battery Pb 6V - 1.2Ah

Alarm Sound Level 81db

Visual Display Red, Blue, Green LED

Operating temperature 5-35°C

Approximate Installation time 30 minutes

4.0 Unit location

The AlertMaxx must be positioned in an area where the alarm can be clearly heard and is permanently

accessible.

5.0 Mounting the AlertMaxx unit

CAUTION!

The AlertMaxx unit is not waterproof and must be installed indoors or inside a kiosk.

1. Using the template provided on page 15 of this instruction manual (gure 1), mark the xing

positions on the wall.

2. Drill the two holes and t suitable wall plugs (ensure correct wall plugs are used for the wall type).

3. Remove the screws from the front of the unit that secure the front fascia.

4. Secure the AlertMaxx unit to the wall using appropriate screws.

PLEASE NOTE

When securing the unit to the wall, avoid over tightening the screws as this may cause the box to crack.

6.0 Connecting mains power to the AlertMaxx unit

6 For technical support, please call 01279 757400

AlertMaxx

1. Insert a large cable gland into the far right hole of the AlertMaxx unit.

2. Feed the mains power cable through the right hand cable gland (large) and connect the power cable

to the terminal strip (see gure 2).

WARNING!

Ensure mains power is isolated before connecting it to the AlertMaxx unit.

Figure 2. Connecting mains

ENL

120

BLUE

BLACK

BROWN

BLUE

PLEASE NOTE

If you have a nger oat, move to section 7.0

If you have a pendant oat, move to section 9.0

BROWN

BLACK

ENL

120

Finger oat

Move to section 7.0

Pendant oat

Move to section 9.0

AlertMaxx

For technical support, please call 01279 757400 7

7.0 Installing a nger oat into a ground or surface water chamber

Care must be taken to ensure the correct type of oat switch is installed into the chamber. The AlertMaxx

is sold either with a nger oat or pendant oat. The nger oat must only be used for ground water

applications and the pendant oat must only be used for foul water applications.

1. Using the nut and washers provided, secure the nger oat to the inside of the oat housing so that the

oat rises with rising water levels (see gure 2).

2. Using the two cable ties provided, attach the oat housing to the discharge arm so it is 300mm from the

base of the chamber (see gure 3).

Figure 3. Ground Water Sump (DMS-164)Figure 2. Ground Water Float Switch

300mm

BROWN

BLACK

ENL

120

8.0 Connecting a nger oat to the AlertMaxx unit

8 For technical support, please call 01279 757400

AlertMaxx

Figure 4. Wiring a nger oat switch

1. Using a draw cord, pull the oat cable through the cable duct on the chamber.

2. Insert a large cable gland into the second from right hole of the AlertMaxx unit.

3. Pull the oat cable through the small cable gland on the AlertMaxx unit.

4. Connect the blue and a brown cable from the oat switch cable to the terminal strip (see gure 4).

PLEASE NOTE

If the cable supplied with the oat switch is too short, the cable can be extended using a cable with a

minimum core cross sectional area of 1mm².

ENL

120

BLUE

BLACK

BROWN

BLUE

BROWN

BLACK

ENL

120

AlertMaxx

For technical support, please call 01279 757400 9

9.0 Installing a pendant oat into a foul water chamber

Figure 6. Foul Water Sump (DMS-165)Figure 5. Foul Water Float Switch

200mm

PLEASE NOTE

The pendant oat switch should be located in a position where the oat can pivot with rising water levels

and not become obstructed (see gure 5).

Option 1 - Free standing foul pump

1. Using the cable tie provided, attach the oat cable to the discharge arm allowing the bottom of the oat

switch to hang approximately 200mm above the base of the chamber (see gure 6).

Option 2 - Guide rail mounted foul pump

1. Pull the oat cable through the oat weight.

2. Using a cable tie, secure the oat weight to the oat cable so there is 80mm of oat cable between the

top of the oat switch and the bottom of the oat weight.

3. Drill a hole through the oat bracket. Hang the pendant oat from the oat bracket so the bottom of the

oat switch hangs approximately 200mm from the base of the chamber. Once the pendant oat is at the

correct height, secure the oat cable to the oat bracket using a cable tie.

BROWN

BLACK

ENL

120

10.0 Connecting a pendant oat to the AlertMaxx unit

10 For technical support, please call 01279 757400

AlertMaxx

Figure 7. Wiring a pendant oat switch

ENL

120

BLUE

BLACK

BROWN

BLUE

1. Using a draw cord, pull the oat cable through the cable duct on the chamber.

2. Insert a large cable gland into the second from right hole of the AlertMaxx unit.

3. Pull the oat cable through the large cable gland on the AlertMaxx unit.

4. Connect the black and a blue cable from the oat switch cable to the terminal strip (see gure 7).

The brown cable should be disregarded and isolated.

PLEASE NOTE

If the cable supplied with the oat switch is too short, the cable can be extended using a cable with a

minimum core cross sectional area of 1mm².

Inhaltsverzeichnis

Andere Delta Sicherheitssystem Handbücher

Delta

Delta 5COM-CN-016CS Bedienungsanleitung

Delta

Delta SH-SI01 Bedienungsanleitung

Delta

Delta IT414071C Bedienungsanleitung

Delta

Delta VIVOTEK SC9133 Bedienungsanleitung

Delta

Delta AlertMaxx DMS-270 Handbuch

Delta

Delta Wireless LCD NVR COMBO Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung