Delta Amplon Series Bedienungsanleitung

www.deltapowersolutions.com

Delta UPS - Amplon Family

User Manual

The power behind competitiveness

RT Series, Single Phase

5/ 6/ 8/ 10 kVA

ESC

BATTERY PACK

Amplon RT Series

SAVE THIS MANUAL

This manual contains important instructions and warnings that you should

follow during the installation, operation, storage and maintenance of this

product. Failure to heed these instructions and warnings will void the warranty.

User Manual (“Manual”), including but not limited to the contents, information,

and figures are solely owned and reserved by Delta Electronics Inc. (“Delta”).

The Manual can only be applied to the operation or the use of this product. Any

disposition, duplication, dissemination, reproduction, modification, translation,

extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop

the product, changes may be made to the information in this Manual at any time

without obligation to notify any person of such revision or changes. Delta will make

all possible efforts to secure the accuracy and the integrity of this Manual. Delta

disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly

or implicitly, including but not limited to the completeness, faultlessness, accuracy,

non-infringement, merchantability or tness for a particular purpose of the Manual.

Table of Contents

III

Table of Contents

Chapter 1 : Important Safety Instructions --------------------------- 1

1.1 Safety Instructions------------------------------------------------------1

1.2 Standard Compliance--------------------------------------------------4

1.3 Storage --------------------------------------------------------------------4

Chapter 2 : Introduction --------------------------------------------------- 5

2.1 General Overview ------------------------------------------------------5

2.2 Exterior & Dimensions-------------------------------------------------5

2.3 Package List -------------------------------------------------------------6

Chapter 3 : Operation Panel---------------------------------------------- 8

3.1 LED Indicators-----------------------------------------------------------8

3.2 Multi-function Buttons--------------------------------------------------9

3.3 LCD Display------------------------------------------------------------ 12

3.3.1 Icon/ Display Denition---------------------------------------------------13

3.3.2 Operation Mode Diagram Denition ----------------------------------14

Chapter 4 : Rear Panel ----------------------------------------------------16

Chapter 5 : Communication Interfaces ------------------------------21

5.1 RS-232 Port ------------------------------------------------------------ 21

5.2 REPO Port-------------------------------------------------------------- 22

5.3 MINI Slot ---------------------------------------------------------------- 22

5.4 USB Port ---------------------------------------------------------------- 22

5.5 Dry Contacts ----------------------------------------------------------- 23

5.6 External Battery Connector ---------------------------------------- 23

Chapter 6 : Installation----------------------------------------------------26

6.1 Rack Mounting -------------------------------------------------------- 26

6.2 Tower Mounting ------------------------------------------------------- 28

6.3 PDB Disassembly & Installation ---------------------------------- 30

6.3.1 Precautions Prior to PDB Disassembly ------------------------- 30

Amplon RT Series

6.3.2 PDB Disassembly ---------------------------------------------------------31

6.3.3 PDB Assembly -------------------------------------------------------------32

6.3.4 PDB Rack-installation ----------------------------------------------------32

6.4 Battery/ Battery Pack Replacement------------------------------ 33

Chapter 7 : Connection and Wiring-----------------------------------35

7.1 UPS Connection Warnings----------------------------------------- 35

7.2 Input/ Output Connection ------------------------------------------- 36

Chapter 8 : Operation -----------------------------------------------------39

8.1 Start-up------------------------------------------------------------------ 39

8.2 Turn-o󰀨 ------------------------------------------------------------------ 41

8.3 Operation Mode ------------------------------------------------------- 42

Chapter 9 : LCD Display & Settings ----------------------------------43

9.1 Initial Setting Screen ------------------------------------------------- 43

9.2 Main Menu-------------------------------------------------------------- 45

9.2.1 Measurement Menu ------------------------------------------------------48

9.2.2 Setting Menu ---------------------------------------------------------------48

9.2.3 Control Menu ---------------------------------------------------------------54

9.2.4 Maintenance Menu--------------------------------------------------------55

Chapter 10 : Optional Accessories -----------------------------------60

Chapter 11 : Troubleshooting-------------------------------------------61

Chapter 12 : Maintenance------------------------------------------------63

12.1 UPS ---------------------------------------------------------------------- 63

12.2 Batteries----------------------------------------------------------------- 63

12.3 Fans---------------------------------------------------------------------- 64

Appendix 1 : Technical Specications-------------------------------65

Appendix 2 : Warranty ----------------------------------------------------68

Chapter 1 Important Safety Instructions

Chapter 1 : Important Safety Instructions

1.1 Safety Instructions

Installation Warnings

zBefore installation and usage, please read this User Manual thoroughly. This

helps you to use the product correctly and safely.

zInstall the UPS in a well-ventilated area, away from excess moisture, heat, dust,

ammable gas or explosives.

z To avoid re accidents and electric shock, please install the UPS in a temperate

and humidity well-controlled indoor area free of conductive contaminants. For

the temperature and humidity specications, please refer to Appendix 1 : Tech-

nical Specications.

zLeave adequate space (at least 50cm) around all sides of the UPS for proper

ventilation.

Connection Warnings

zThe UPS must be well grounded due to a possible risk of current leakage.

zThe installation of upstream and downstream protective devices is highly recom-

mended when the UPS is connected to the mains and the loads.

zThe protective devices connecting to the UPS must be installed near the UPS

and must be easily accessible for operation.

zIf you need to move the UPS or perform re-wiring, please turn o󰀨 the AC input

power and ensure that the UPS has been safely shutdown. Otherwise, the out-

put end might still be energized, which might cause electric shock.

Usage Warnings

zThis is a class-A product. In a domestic environment, this product may cause ra-

dio interference, in which case, the user is required to take adequate measures.

zThe UPS can be used to power computers and associated peripheral devices,

such as monitors, modems, cartridge tape drives, external hard drives, etc.

Amplon RT Series

zIt is strictly forbidden to connect the UPS with:

1. Any regenerative loads.

2. Any asymmetrical loads.

zTo ensure reliable operation of the UPS and to protect the UPS from overheat-

ing, the slits and openings in the UPS must not be blocked or covered.

zBefore usage, you must allow the UPS to adjust to room temperature for at least

one hour to avoid moisture condensing inside the UPS.

zDo not pour and splash any liquid on the UPS. Do not insert any object into

the UPS’s slits and openings. Do not put beverage containers on or around the

UPS.

zWhen an emergency occurs, (1) press and hold the ON/ OFF button ( ) for

3 seconds, (2) release it after you hear one beep, (3) use the Scrolling UP or

Down button ( / ) to select 'Yes', and (4) press the Enter button ( ) to

conrm your selection to turn o󰀨 the UPS. After that, cut o󰀨 the input power to

completely shut down the UPS.

zDo not use any cleaning liquid or cleaning spray to clean the UPS. Before clean-

ing, please make sure that the UPS has been completely shut down, the UPS’s

input power cord has been unplugged, and the batteries have been disconnect-

ed.

z All maintenance services must be performed by qualied service personnel.

zForbid opening or removing the cover of the UPS yourself to avoid high voltage

electric shock.

z You must contact qualied service personnel if either of the following events oc-

curs:

1. Liquid is poured or splashed on the UPS.

2. The UPS does not run normally after this User Manual is carefully

observed.

NOTE :

If you use the UPS in an area that generates or incurs dust, you should

install a dust lter (optional) in the 5/ 6kVA UPS and two in the 8/ 10kVA

UPS to ensure normal product life and function.

Chapter 1 Important Safety Instructions

Battery Warnings

zKeep the batteries away from heat sources. Do not open or mutilate the batter-

ies.

zDo not dispose of batteries in a re. The batteries may explode.

zThe released electrolyte is harmful to the skin and eyes and may be toxic.

zA battery can present a risk of electric shock and high short-circuit current.

zServicing of batteries and battery packs must be performed or supervised by

qualified service personnel knowledgeable in batteries, battery packs and the

required precautions. Keep unauthorized personnel away from batteries and

battery packs.

zThe risk of electric shock and short-circuit current is possible when the batteries

are connected to the UPS. Before maintenance, disconnect all batteries to cut

o󰀨 the battery power.

zFor battery replacement, only use the same number and type of batteries.

zObserve the following before replacing the batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on the top of batteries.

5. Disconnect charging source prior to connecting or disconnecting battery

terminals.

6. Remove battery grounds during installation and maintenance to reduce

likelihood of shock. Remove the connection from ground if any part of the

battery is determined to be grounded.

z Do not connect the batteries in reverse; otherwise, a risk of electric shock or re

accidents might occur.

zThe batteries might lose their power during shipment or storage. Before you use

the UPS for the rst time, please fully charge the batteries until the battery ca-

pacity percentage shown on the UPS’s LCD is 100% (

100 %

). If the UPS needs to

be stored for an extended period of time, please charge the batteries every three

months and ensure that, every time after charging, the battery capacity percent-

age shown on the UPS’s LCD is 100% (

100 %

Amplon RT Series

WARNING:

1. The risk of electric shock and short-circuit current is possible when

the batteries are still connected to the UPS even though the UPS

is disconnected from the mains. Do not forget to cut off the battery

source before maintenance.

2. When the UPS is connected to external battery packs, the installation

of appropriate protective devices, such as a DC fuse or a DC non-fuse

breaker, is required.

1.2 Standard Compliance

zCE

zUL, cUL

zEN 62040-1

zEN 62040-2 Category C2

1.3 Storage

zPrior to installation

If the UPS needs to be stored prior to installation, it should be placed in a dry

and well-ventilated area. The allowable storage temperature is between -15°C

and +50°C (5°F~122°F).

zAfter usage

(1) Press and hold the ON/ OFF button ( ) for 3 seconds, (2) release it after

you hear one beep, (3) use the Scrolling UP or Down button ( / ) to

select 'Yes', and (4) press the Enter button ( ) to conrm your selection to

turn o󰀨 the UPS. Make sure the UPS is shutdown, disconnect the UPS from the

utility AC power, remove all loads/ equipment from the UPS, and store the UPS

in a dry and well-ventilated area at a temperature between -15°C and +50°C

(5°F~122°F).

Idle batteries must be recharged fully approximately every three months if the

UPS needs to be stored for an extended period of time. Ensure that, every time

after charging, the battery capacity percentage shown on the UPS’s LCD is

100% (

100 %

NOTE :

After storage and before start-up of the UPS, you must allow the UPS to

adjust to room temperature (20°C~25°C or 68°F~77°F) for at least one

hour to avoid moisture condensing inside the UPS.

Chapter 2 Introduction

Chapter 2 : Introduction

2.1 General Overview

The RT series UPS is a single-phase input, single-phase output on-line uninterrupt-

ible power supply which provides reliable and consistent sine-wave quality power

to your electronic equipment. It adopts the latest technology and the highest quality

components providing output power factor up to unity, and its e󰀩ciency in on-line

mode reaches up to 95.5%. The UPS not only provides safe, reliable and uninter-

ruptible power to your sensitive electronic equipment at all times, but also produces

greater electronic power efficiency at less cost. There are four different ratings,

5kVA, 6kVA, 8kVA and 10kVA, for your selection.

2.2 Exterior & Dimensions

The product that you receive is composed of three parts, a UPS, a battery pack and

a PDB (Power Distribution Box). Please refer to Figure 2-1 and Figure 2-2.

NOTE :

When handling or moving the product, please note that the force area of the

product is at the bottom of the battery pack, but not at the PDB.

ESC

BATTERY PACK

440mm

88mm

176mm

665mm

565mm

UPS

Battery Pack

PDB

(Figure 2-1: Standard Runtime Model - 5/ 6KVA Exterior & Dimensions)

Amplon RT Series

ESC

BATTERY PACK

130mm

218mm

750mm

565mm

440mm

UPS

Battery Pack

PDB

(Figure 2-2: Standard Runtime Model - 8/ 10KVA Exterior & Dimensions)

2.3 Package List

The package contains the following items. Please check if any item is missing. If

there is anything missing, please contact the dealer immediately.

Models: UPS502R2RT0B0B8/ UPS602R2RT0B0B8/ UPS802R2RT0B0B8/

UPS103R2RT0B0B8/ UPS502R2RT0B035/ UPS602R2RT0B035/

UPS802R2RT0B035/ UPS103R2RT0B035

4 or

www.deltapowersolutions.com

Delta UPS - Amplon Family

UserManual

Thepower behind competitiveness

RTSeries, Single Phase

5/6/ 8/ 10 kVA

ESC

BATTERYPACK

× 2

1 2 34

567

8 9

ESC

BATTERY PACK

ESC

BATTERY PACK

8/ 10kVA

5/ 6kVA

× 8× 8

× 4

Andere Handbücher für Amplon Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta UPS Handbücher

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Amplon UPS102N2000B035 Bedienungsanleitung

Delta

Delta Amplon UPA102R2RX2N035 Bedienungsanleitung

Delta

Delta UPS102N2002N0B0 Bedienungsanleitung

Delta

Delta Amplon MBB RT Series Bedienungsanleitung

Delta

Delta Agilon VX Series Benutzerhandbuch

Delta

Delta Ultron HPH Series Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta NH Plus series Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Ultron Series Bedienungsanleitung

Delta

Delta DPH series Bedienungsanleitung

Delta

Delta Amplon MX Series Bedienungsanleitung

Delta

Delta NT Series Bedienungsanleitung

Delta

Delta INX Series Bedienungsanleitung

Delta

Delta NH-20k Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta 1kVAS Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta DPS Series Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung