Delta UPS102N2002N0B0 Bedienungsanleitung

www.deltapowersolutions.com

Delta UPS - Amplon Family

User Manual

The power behind competitiveness

N Series, Single Phase

1/ 2/ 3 kVA

Amplon N Series

Save This Manual

This manual contains important instructions and warnings that you should

follow during the installation, operation, storage and maintenance of this

product. Failure to heed these instructions and warnings will void the warranty.

User Manual (“Manual”), including but not limited to the contents, information,

and figures are solely owned and reserved by Delta Electronics Inc. (“Delta”).

The Manual can only be applied to the operation or the use of this product. Any

disposition, duplication, dissemination, reproduction, modification, translation,

extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop

the product, changes may be made to the information in this Manual at any time

without obligation to notify any person of such revision or changes. Delta will make

all possible efforts to secure the accuracy and the integrity of this Manual. Delta

disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly

or implicitly, including but not limited to the completeness, faultlessness, accuracy,

non-infringement, merchantability or tness for a particular purpose of the Manual.

Table of Contents

III

Table of Contents

Chapter 1 : Important Safety Instructions --------------------------- 1

1.1 Safety Instructions ---------------------------------------------- 1

1.2 Storage------------------------------------------------------------- 4

Chapter 2 : Introduction --------------------------------------------------- 5

2.1 General Overview ----------------------------------------------- 5

2.2 Exterior & Dimensions ----------------------------------------- 5

2.3 Package List ------------------------------------------------------ 6

Chapter 3 : Operation Panel---------------------------------------------- 8

3.1 LED Indicators --------------------------------------------------- 8

3.2 Multi-function Buttons ------------------------------------------ 9

3.3 LCD Display ----------------------------------------------------- 11

3.4 7-Segment Display---------------------------------------------14

3.5 Flow Chart of the 7-Segment Display ---------------------16

Chapter 4 : Rear Panel ----------------------------------------------------18

Chapter 5 : Operation Modes -------------------------------------------20

5.1 Standby Mode---------------------------------------------------20

5.2 On-line Mode ---------------------------------------------------20

5.3 Bypass Mode ----------------------------------------------------20

5.4 Battery Mode ----------------------------------------------------20

5.5 Setup Mode -----------------------------------------------------21

Chapter 6 : Turn-on & Turn-off Procedures ------------------------23

6.1 Turn-on Procedures--------------------------------------------23

6.1.1 Normal Start-up ---------------------------------------------------------23

6.1.2 Cold Start-----------------------------------------------------------------23

6.2 Turn-off Procedures--------------------------------------------24

Chapter 7 : Alarm -----------------------------------------------------------25

Chapter 8 : Optional Accessories -------------------------------------26

Amplon N Series

Chapter 9 : Troubleshooting --------------------------------------------27

Chapter 10 : Maintenance------------------------------------------------30

10.1 UPS ----------------------------------------------------------------30

10.2 Batteries ----------------------------------------------------------30

10.3 Fan -----------------------------------------------------------------31

Appendix 1 : Technical Specications-------------------------------32

Appendix 2 : Warranty ----------------------------------------------------34

Chapter 1 Important Safety Instructions

Chapter 1 : Important Safety Instructions

1.1 Safety Instructions

Installation Warnings

zBefore installation and usage, please read this User Manual thoroughly. This

helps you to use the product correctly and safely.

zInstall the UPS in a well-ventilated area, away from excess moisture, heat, dust,

ammable gas or explosives.

z To avoid re accidents and electric shock, please install the UPS in a temper-

ate and humidity well-controlled indoor area free of conductive contaminants.

For the temperature and humidity specications, please refer to Appendix 1 :

Technical Specications.

zLeave adequate space (at least 15cm) around all sides of the UPS for proper

ventilation.

Connection Warnings

zThe UPS must be well grounded due to a possible risk of current leakage.

zThe installation of upstream and downstream protective devices is highly recom-

mended when the UPS is connected to the mains and the loads.

zThe protective devices connecting to the UPS must be installed near the UPS

and must be easily accessible for operation.

zDo not use extension cords to connect the UPS to an AC outlet.

zDo not plug the UPS’s input power cord (provided) into its own output sockets.

zIf you need to move the UPS or perform re-wiring, please turn off the AC input

power and ensure that the UPS has been safely shutdown. Otherwise, the out-

put end might still be energized, which might cause electric shock.

zThe UPS output cable should be shorter than 10m.

Amplon N Series

Usage Warnings

zThis is a class-A product. In a domestic environment, this product may cause ra-

dio interference, in which case, the user is required to take adequate measures.

zThe UPS can be used to power computers and associated peripheral devices,

such as monitors, modems, cartridge tape drives, external hard drives, etc.

zIt is strictly forbidden to connect the UPS with:

1. any regenerative-type loads.

2. any asymmetrical loads (ex. half-wave rectier).

zTo ensure reliable operation of the UPS and to protect the UPS from overheat-

ing, the slits and openings in the UPS must not be blocked or covered.

zBefore usage, you must allow the UPS to adjust to room temperature for at least

one hour to avoid moisture condensing inside the UPS.

zDo not pour and splash any liquid on the UPS. Do not insert any object into

the UPS’s slits and openings. Do not put beverage containers on or around the

UPS.

zWhen an emergency occurs, press the OFF button ( ) and release it after

you hear one beep to turn off the UPS. Cut off the input power to completely

shut down the UPS.

zDo not use any cleaning liquid or cleaning spray to clean the UPS. Before clean-

ing, please make sure that the UPS has been completely shut down, the UPS’s

input power cord has been unplugged, and the built-in batteries have been dis-

connected.

zAll maintenance services must be performed by qualified service personnel.

Forbid opening or removing the cover of the UPS to avoid high voltage electric

shock.

zYou must contact qualied service personnel if either of the following events oc-

cur:

1. Liquid is poured or splashed on the UPS.

2. The UPS does not run normally after this User Manual is carefully

observed.

NOTE :

If you use the UPS in an area that generates or incurs dust, you should

install a dust lter in the UPS to ensure normal product life and function.

Chapter 1 Important Safety Instructions

Battery Warnings

Model Device No. UPS

Rating

Battery

Voltage Note

Standard

Model

UPS102N2000N0B0 1kVA 24Vdc

1. There are two sealed lead-acid

built-in batteries.

2. The UPS cannot connect any

external battery pack.

UPS202N2000N0B0 2kVA 48Vdc

1. There are four sealed lead-acid

built-in batteries.

2. The UPS cannot connect any

external battery pack.

UPS302N2000N0B0 3kVA 72Vdc

1. There are six sealed lead-acid

built-in batteries.

2. The UPS cannot connect any

external battery pack.

Long

Backup

Model

UPS102N2002N0B0 1kVA 24Vdc 1. There is no built-in battery.

2. The UPS can connect external

battery pack(s).

UPS202N2002N0B0 2kVA 48Vdc

UPS302N2002N0B0 3kVA 72Vdc

zKeep the batteries away from heat sources. Do not open or mutilate the batter-

ies. The released electrolyte is harmful to the skin and eyes and may be toxic.

zA battery can present a risk of electric shock and high short-circuit current.

zServicing of batteries must be performed or supervised by qualied service per-

sonnel knowledgeable in batteries and the required precautions. Keep unauthor-

ized personnel away from batteries.

zThe risk of electric shock and short-circuit current is possible when the batteries

are connected to the UPS. Before maintenance, disconnect all batteries to cut

off the battery power.

zFor battery replacement, only use the same number and type of batteries.

zObserve the following before replacing the batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

Amplon N Series

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on the top of batteries.

5. Before battery removal, replacement or installation, disconnect any circuit

connected to the batteries.

zDo not connect the batteries in reverse; otherwise, a risk of electric shock or re

accidents might occur.

WARNING:

The risk of electric shock and short-circuit current is possible when

the batteries are still connected to the UPS even though the UPS is

disconnected from the mains. Do not forget to cut off the battery source

before maintenance.

1.2 Storage

zPrior to installation

If the UPS needs to be stored prior to installation, it should be placed in a

dry area. The allowable storage temperature is between -15°C and +50°C

(5°F~122°F).

zAfter usage

Press the button, make sure the UPS is shutdown, disconnect the UPS from

the utility power, remove all equipment from the UPS, and store the UPS in a dry

and well-ventilated area at a temperature between -15°C and +50°C (5°F~122°F).

Idle batteries must be recharged fully approximately every three months if the

UPS needs to be stored for an extended period of time. The charging time must

not be less than 24 hours each time.

NOTE :

After storage and before start-up of the UPS, you must allow the UPS to

adjust to room temperature (20°C~25°C or 68°F~77°F) for at least one

hour to avoid moisture condensing inside the UPS.

Chapter 2 Introduction

Chapter 2 : Introduction

2.1 General Overview

The N series UPS is a single-phase on-line UPS providing reliable and consistent

sine-wave quality power to your electronic equipment. It adopts the latest technol-

ogy and the highest quality components providing output power factor up to 0.9 and

its efciency in on-line mode can reach at maximum 93%. The UPS not only pro-

vides safe, reliable and uninterrupted power to your sensitive electronic equipment

at all times, but also produces greater electronic power efciency at less cost. Its

compact design does not occupy much space and is easy to use. There are three

different ratings (1kVA, 2kVA and 3kVA) for your selection.

2.2 Exterior & Dimensions

(Figure 2-1 : 1 kVA

Exterior & Dimensions)

(Figure 2-2 : 2/3 kVA

Exterior & Dimensions)

225mm

320mm

145mm

325mm

390mm

190mm

Amplon N Series

2.3 Package List

NOTE :

1. If there is any damage or anything missing, please immediately contact

the dealer from whom you purchased the unit.

2. If the UPS needs to be returned, carefully repack the UPS and all of the

accessories using the original packing material that came with the unit.

zStandard Model: UPS102N2000N0B0 (1kVA)/ UPS202N2000N0B0 (2kVA)/

UPS302N2000N0B0 (3kVA):

SETUP ON OFF

2 3 4

No. Item Q’ty 1/ 2kVA 3kVA

1UPS 1 PC

2User Manual 1 PC

3Terminal Copper *13 PCS

4Cable Tie *11 PC

*1: The terminal copper (3 PCS) and cable tie (1 PC) are used to connect the

UPS output terminals ( L, N, ) located at the rear of the 3kVA UPS.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta UPS Handbücher

Delta

Delta Amplon MX Series Bedienungsanleitung

Delta

Delta UPS102R2000B0B1 Original Betriebsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Ultron GES203HH33A035 Bedienungsanleitung

Delta

Delta UPS V3 Bedienungsanleitung

Delta

Delta UPS103N2004N0B0 Original Betriebsanleitung

Delta

Delta 3KVA Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta M-1K Bedienungsanleitung

Delta

Delta N-6K Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta EH-10K Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta 1KVA Bedienungsanleitung

Delta

Delta Amplon RT5K Bedienungsanleitung

Delta

Delta Amplon MBB RT Series Bedienungsanleitung

Delta

Delta Agilon VX Series Benutzerhandbuch

Delta

Delta NH-20k Bedienungsanleitung

Delta

Delta Ultron DPS-400K Bedienungsanleitung

Delta

Delta NT-15K Bedienungsanleitung

Delta

Delta Modulon DPH series Bedienungsanleitung

Delta

Delta Ultron DPS-400K Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Modulon DPH series Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung