Deltacom DJ1000 Bedienungsanleitung

Your DJ1000 System has been installed by:

Your DJ1000 System has been manufactured by:

INTERCOMS – DUCTED VACCUMS – SECURITY ALARMS

Hampshire Way Pty Ltd ITF the Dowel Trust T/AS Deltacom

24 ALFRED STREET BLACKBURN VIC AUSTRALIA 3130

Tel: (03) 98944099 ABN: 22 818 910 108 Fax: (03) 98943331

DELTACOM

Intercom System

DJ1000

Operating

Instructions

■The Aux Button

The Aux button enables second functions. These are engaged by first pressing the

Aux button followed by the second button.

By pressing Aux and then the Music button you will turn music off at all Units in the

system.

A short beep will be heard to indicate a successful Aux has been completed.

Aux + Music Turns off music at all units (does not turn off the Radio)

Aux + Privacy Disables the Alarm function at that unit

Aux + Cancel Enables the Alarm function at that unit

Aux + Talk Monitors that Unit to all other Units (except the Door Unit)

■Options

Each Unit may be programmed to enable / disable features of the system.

These features include: -

• A Unit will / will not receive the Door Chime

• A Unit will / will not be able to operate the Unlock function

• A Unit will / will not be able to select Privacy

• A Unit will / will not be able to Master Cancel

Instructions for the DJ1000

Table of Contents

The Master Unit .................................................................2

Clock Set Button .................................................................2

Alarm Set Button.................................................................3

Display Button.....................................................................3

Radio Button .......................................................................3

How to use the Intercom..................................................4

The Volume Control............................................................4

The Status Lights................................................................4

The Talk Button...................................................................5

The Cancel Button ..............................................................5

The Privacy Button..............................................................6

The Music Button................................................................6

Room Number Buttons........................................................7

Monitoring ...........................................................................7

The Unlock Button...............................................................7

The Door Unit...........………………………………………….7

The Aux Button.........………………………………………….8

Options..................................................................................8

Manufacturer's Warranty.......................................................9

The Master Station

Note: It is not necessary to include a Master station in the system. When the system

is run without a Master station, it is called a DJ1000 Minicom.

The Master Unit

The Clock Radio Controls on the Master Unit are located on the top right hand side

of the Unit. A protective lens covers the Clock adjustment buttons.

■Clock Set Button

To adjust the time, hold the Clock Set button while pressing either the hour or

minute button. The time must be displayed before the time is adjusted.

The PM Light will illuminate to indicate that the clock is showing PM and will not be

lit when it is AM.

While the time is displayed the Dot will flash every second.

When the Alarm Time is displayed the dot will not flash.

■Room Number Buttons

To call an individual Unit press the Room number of that Unit. This will enable

private calling between Units. When the Unit has been selected use the Talk button

to communicate with this Unit. More than one Unit may be selected.

A Door Unit can only be called when it has been selected by a Room number

Button.

The Door Unit is usually number 16.

■Monitoring

To monitor a Unit press and hold the Room number button for that Unit for more

than two seconds. A short beep will be heard when the Room number Button is

released to indicate monitoring mode has been selected. More than one Unit may

be monitored at one time.

■The Unlock Button

Where an electric opening device is installed and connected to the system it may be

operated by first calling the Door Unit and then pressing the Unlock button.

■The Door Unit

The Door Unit has only one button. Pressing this button will sound the Door Chime

throughout the system. The Door Unit will not receive music.

■The Privacy Button

Pressing the Privacy button will select Privacy. This will prevent others from

listening to your Unit. If you wish to respond to a call and privacy is selected you can

cancel Privacy by pressing the Privacy Button.

To select full privacy where you cannot be called or listened to, press and hold

Privacy for more than two seconds. A short beep will be heard when the Button is

released to indicate full privacy has been selected.

■The Music Button

If music is connected to the system pressing the Music button will allow music to be

heard. To cancel music, press the Music button again. Music may not be selected

when the Unit is included in an intercom call.

Music may be set for 60 minutes at any Room Unit. To select music for 60 minutes

press and hold the Music button for more than two seconds. When the Music

button is released a short beep will be heard to indicate that 'sleep' has been

selected (See Radio Button page 3).

■Alarm Set Button

To adjust the alarm time press the Display button to show the alarm time. While

holding the Alarm Set button press the Hour or Minute Button.

To activate the alarm press the Alarm button. The alarm light will illuminate to

indicate that the Alarm has been turned on. To turn off the Alarm press the Alarm

button again.

The Alarm will turn the Radio on and music will be heard for approximately one hour

at the Room Units. The Radio will continue to be heard at the Master Unit.

■Display Button

The Display button will change the display to show the time, Alarm time and the

Radio frequency each time it is pressed. The Display will automatically revert back

to the time display.

■Radio Button

The Radio controls are located below the Clock controls. The Radio On/Off button

turns the Radio on or off. When the Radio is turned on the Radio On/Off light will be

illuminated. (Note: Music button must be turned on to hear the Radio.)

To tune the Radio press one of the Tuning buttons either up or down. The Radio will

automatically search for a station. If you wish to manually tune the Radio press one

of the Tuning Buttons briefly and it will step through the channel bank each time the

Tuning Button is pressed.

To switch from the AM Band to the FM Band press the AM/FM button.

To store stations in the memory press the MEM button and then press the Channel

button you want to store the Station in. There are 5 preset stations for both AM and

FM.

How to use the Intercom

The Room Unit

■The Volume Control

The Volume Control will adjust the volume of music, intercom and chime at that

Unit.

■The Status Lights

The In Use light shows when the system is in use. The On light shows when a Unit

is included in an Intercom call. The Privacy light shows when privacy is selected.

On each Unit there are 22 Buttons. These are Talk, Cancel, Privacy, Music,

Unlock and the Room number Buttons 1 to 16.

■The Talk Button

Pressing and holding the Talk button will enable you to communicate with the rest of

the system except the Door Unit. When the Talk button is released you will hear all

other Units and they can reply hands-free.

Units with Privacy selected will not be heard.

When the Talk button is pressed the In Use and On lights will illuminate.

To talk to a particular room press the Room number button of that room and then

press Talk.

To talk to more than one room press the Room number of one room and then the

Room number of the second, third etc. rooms, then press Talk.

■The Cancel Button

The Cancel Button will cancel an intercom call. The Unit that initiated the call need

only press the Cancel Button. Other Units may cancel a call by pressing and holding

the Cancel Button for more than two seconds. When the Cancel Button is released

the intercom call will be cancelled. This is called Master Cancel.

If the Cancel Button is not pressed and monitoring mode has not been selected the

call will automatically cancel approximately sixty seconds after the Talk button was

last pressed or sixty seconds after a Room number button was last pressed.