Product are imported and distributer by VINA STAR JSC
Hotline: 1900 588 851
4. INSTALLATION PROCEDURES
SAFETY WARNING
HOODS MAY HAVE VERY SHARP EDGES, PLEASE WEAR
PROTECTIVE GLOVES IF IT IS NECESSARY TO REMOVE ANY PARTS
FOR INSTALLING, CLEANING OR SERVICING.
Step 1:
According to the size of the holes.
Drill A.B. 2 holes in level in the wall with
8mm in diameter and 75-85mm
in depth. Press the 2 expanding tube
provided into the holes. Tighten the
2 metal screws of 5x50mm which supply
together with hoods to the expanding
tube, make sure it is fixed enough and
can not move.
Step 2:
Take out of the cooker hoods
from the carton and put it on a
horizontal work table gently. Fix
the reducer pipe into the tope of
reducer, make sure is connect
the reducer tightly
