Denon AVR-2106 Bedienungsanleitung

DENON AVR/AVC control protocol

For AVR2106

Application model : AVR-2106(E3)

Application terminal : RS-232C

Connector specification

Connector type : DB-9pin female type, slave straight connection (DCE type)

( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC )

Communication format :

Synchronous system : Tone step synchronization

communication system : A half duplex

Communication speed : 9600bps

Character length : 8 bits

Parity control : None

Start bit : 1 bit

Stop bit : 1 bit

Communication procedure : Non procedural

Communication data length : 135 bytes (maximum)

- -

238

Protocol specification

The following three data forms is defined.

COMMAND : The message sent to a system(AVR/AVC) from a controller(Touch Panel etc.)

A command to a system is given from a controller.

EVENT : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC)

The result is sent, when a system is operated directly and a state changes.

*The form of EVENT presupposes that it is the same as that of COMMAND.

**Refer to the following table for the contents of COMMAND and EVENT.

RESPONSE : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC)

if the ‘request command’ (COMMAND+?+CR(0x0D)) has came from a controller.

The RESPONSE should be sent within 200ms of receiving the COMMAND.

*The form of RESPONSE presupposes that it is the same as that of EVENT.

Basic specification : The command by ASCII CODE, parameter expression

*ASCII CODE which can be used is from 0x20 to 0x7F : the alphabet and the number of 0-9 , and space (0x20) , Some signs ,

AND carriage return(0x0D)--- It is used only as a pause sign.

Command structure : COMMAND + PARAMETER + CR(0x0D)

COMMAND : ASCII CODE of 2 characters

ex. SI : Select Input source

MS : surround Mode Setting

MV : Master Volume setting

PW : system PoWer setting

PARAMETER : ASCII CODE ( up to 25 characters)

ex. DVD : function name

CDR/TAPE-1 : function name

THX SURROUND EX : surround mode name

SUPER STADIUM : surround mode name

*Special Parameter--- ? : for request command

- -

239

The example of a command * <CR> is the meaning of 0x0D.

SIDVD<CR> : Select Input source DVD

MSDOLBY DIGITAL<CR> : surround Mode Set to DOLBY DIGITAL

MVUP<CR> : Master Volume UP

PWON<CR> : system PoWer ON

PWSTANDBY<CR> : system PoWer STANDBY

SI?<CR> : Request command for now playing input source >> Return RESPONSE ‘SI***<CR>’

- -

240

Others

A) COMMAND is receivable also during transmission of EVENT.

B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels

returns as EVENT.

C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including an intact channel. In this case,

the data of an intact channel is set to "50".

D) Since SURROUND MODE changes simultaneously when the INPUT source changes, the SURROUND MODE (and also the value of the channel

volume of all channels , It described in B) ) returns as EVENT.

E) When SURROUND MODE is the same in between INPUT source change before and after, EVENT of SURROUND MODE and CHANNEL VOLUME

does NOT return.

F) Although EVENT of SURROUND MODE returns when the present SURROUND MODE is set up again, CHANNEL VOLUME does NOT return.

G) When SURROUND MODE is changed, before returning SURROUND MODE after change as EVENT, the present SURROUND MODE is returned.

H) The RESPONSE should be sent as opposed to the request command by all the commands with which an EVENT exists , not need to

the another request commands(ex. SV command).

I) The PARAMETER (with COMMAND and RESPONSE, EVENT) of minimum level of MASTER VOLUME defines “99”.

J) If the MASTER VOLUME & CHANNEL VOLUME set with 0.5dB step, the PARAMETER (with COMMAND and RESPONSE, EVENT) defines three

ASCII characters as bellows.

ex. MASTER VOLUME = +1.0dB : MV81<CR>

+0.5dB : MV805<CR>

0dB : MV80<CR>

-0.5dB : MV795<CR>

-1.0dB : MV79<CR>

| |

-79.5dB : MV005<CR>

-80.0dB : MV00<CR>

--- : MV99<CR>

* At the **.0dB step, only uses two ASCII characters as PARAMETER, same as usual.

- -

241

COMMAND and PARAMETER list

COMMAND PARAMETER function example

PW ON POWER ON/STANDBY change PWON<CR>

STANDBY PWSTANDBY<CR>

MV UP MASTER VOLUME UP/DOWN , direct change to **dB MVUP<CR>

DOWN MVDOWN<CR>

** **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) MV80<CR>

CV FL UP CHANNEL VOLUME UP/DOWN , direct change to **dB CVFL UP<CR>

FL DOWN ---FRONT Lch CVFL DOWN<CR>

FL ** **:38 to 62 by ASCII , 50=0dB CVFL 50<CR>

FR UP CVFR UP<CR>

FR DOWN ---FRONT Rch CVFR DOWN<CR>

FR ** **:38 to 62 by ASCII , 50=0dB CVFR 50<CR>

C UP CVC UP<CR>

C DOWN ---CENTERch CVC DOWN<CR>

C ** **:38 to 62 by ASCII , 50=0dB CVC 50<CR>

SW UP ---SUBWOOFERch CVSW UP<CR>

SW DOWN **:00,38 to 62 by ASCII , 50=0dB CVSW DOWN<CR>

SW ** 00=OFF CVSW 50<CR>

SL UP CVSL UP<CR>

SL DOWN ---SURROUND Lch CVSL DOWN<CR>

SL ** **:38 to 62 by ASCII , 50=0dB CVSL 50<CR>

SR UP CVSR UP<CR>

SR DOWN ---SURROUND Rch CVSR DOWN<CR>

SR ** **:38 to 62 by ASCII , 50=0dB CVSR 50<CR>

SBL UP ---SURROUND BACK Lch (SBch 2SP) CVSBL UP<CR>

SBL DOWN CVSBL DOWN<CR>

SBL ** **:38 to 62 by ASCII , 50=0dB CVSBL 50<CR>

SBR UP ---SURROUND BACK Rch (SBch 2SP) CVSBR UP<CR>

SBR DOWN CVSBR DOWN<CR>

SBR ** **:38 to 62 by ASCII , 50=0dB CVSBR 50<CR>

The PARAMETER of MV , CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 (J) section)

- -

242

COMMAND

PARAMETER function example

CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR>

SB DOWN CVSB DOWN<CR>

SB ** **:38 to 62 by ASCII , 50=0dB CVSB 50<CR>

MU ON OUTPUT MUTE ON/OFF change MUON<CR>

OFF MUOFF<CR>

SI PHONO Select INPUT source SIPHONO<CR>

CD SICD<CR>

TUNER SITUNER<CR>

DVD ---Select DVD/VDP function at AVR-2106 SIDVD<CR>

VDP ---Invalid at AVR-2106 SIVDP<CR>

TV ---Select TV/DBS function at AVR-2106 SITV<CR>

DBS/SAT ---Invalid at AVR-2106 SIDBS/SAT<CR>

VCR-1 SIVCR-1<CR>

VCR-2 SIVCR-2<CR>

VCR-3 ---Invalid at AVR-2106 SIVCR-3<CR>

V.AUX SIV.AUX<CR>

CDR/TAPE1 ---Select CDR/TAPE function at AVR-2106 SICDR/TAPE1<CR>

MD/TAPE2 ---Invalid at AVR-2106 SIMD/TAPE2<CR>

ZM ON MAIN-ZONE ON/OFF change at AVR-2106 ZMON<CR>

OFF ZMOFF<CR>

Z1 PHONO ---Invalid at AVR-2106 Z1PHONO<CR>

| |

CDR/TAPE1 Z1MD/TAPE2<CR>

SOURCE ---Invalid at AVR-2106 Z1SOURCE<CR>

UP ---Invalid at AVR-2106 Z1UP<CR>

DOWN Z1DOWN<CR>

** Z180<CR>

ON ---Invalid at AVR-2106 Z1ON<CR>

OFF Z1OFF<CR>

The PARAMETER of CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 (J) section)

- -

243

COMMAND

PARAMETER function example

Z2 PHONO MULTI ZONE-2 mode set , and select source at AVR-2106 Z2PHONO<CR>

| ---The name of PARAMETER is |

CDR/TAPE1 the same as that of the time of SI COMMAND. Z2MD/TAPE2<CR>

SOURCE MULTI ZONE-2 mode cancel Z2SOURCE<CR>

UP MULTI ZONE-2 VOLUME UP/DOWN , direct change to **dB Z2UP<CR>

DOWN Z2DOWN<CR>

** **:10 to 99 by ASCII , 80=0dB, 99=---(MIN) Z280<CR>

ON MULTI ZONE-2 ON/OFF change at AVR-2805 Z2ON<CR>

OFF Z2OFF<CR>

SR PHONO REC SELECT mode set , and select source SRPHONO<CR>

| ---The name of PARAMETER is |

CDR/TAPE1 the same as that of the time of SI COMMAND. SRMD/TAPE2<CR>

SOURCE REC SELECT mode cancel SRSOURCE<CR>

SV DVD VIDEO SELECT mode set , and select source SVDVD<CR>

VDP ---Invalid at AVR-2106 SVVDP<CR>

TV SVTV<CR>

DBS/SAT ---Invalid at AVR-2106 SVDBS/SAT<CR>

VCR-1 SVVCR-1<CR>

VCR-2 SVVCR-2<CR>

VCR-3 ---Invalid at AVR-2106 SVVCR-3<CR>

V.AUX SVV.AUX<CR>

SOURCE VIDEO SELECT mode cancel SVSOURCE<CR>

SD AUTO set DIGITAL INPUT AUTO mode SDAUTO<CR>

PCM set DIGITAL INPUT force PCM mode SDPCM<CR>

DTS set DIGITAL INPUT force DTS mode SDDTS<CR>

RF ---Invalid at AVR-2106 SDRF<CR>

ANALOG set force ANALOG INPUT mode SDANALOG<CR>

EXT.IN-1 ---Set EXT.IN mode at AVR-2106 SDEXT.IN-1<CR>

EXT.IN-2 ---Invalid at AVR-2106 SDEXT.IN-2<CR>

- -

244

EVENT

PARAMETER function example

MS DIRECT SURROUND mode set MSDIRECT<CR>

PURE DIRECT ---Valid for AVR-2106 MSPURE DIRECT<CR>

STEREO MSSTEREO<CR>

MULTI CH IN ---Invalid at AVR-2106 MSMULTI CH IN<CR>

MULTI CH DIRECT ---Invalid at AVR-2106 MSMULTI CH DIRECT<CR>

MULTI CH PURE D ---Invalid at AVR-2106 MSMULTI CH PURE D<CR>

DOLBY PRO LOGIC All are received as "DOLBY SURROUND" , MSDOLBY PRO LOGIC<CR>

DOLBY PL2 the surround mode which changed return as EVENT. MSDOLBY PL2<CR>

DOLBY PL2x MSDOLBY PL2X<CR>

DOLBY DIGITAL MSDOLBY DIGITAL<CR>

DOLBY D EX MSDOLBY D EX<CR>

DTS NEO:6 All are received as "DTS SURROUND" , MSDTS NEO:6<CR>

DTS SURROUND MSDTS SURROUND<CR>

DTS ES DSCRT6.1 MSDTS ES DSCRT6.1<CR>

DTS ES MTRX6.1 MSDTS ES MTRX6.1<CR>

DOLBY H/P ---Invalid at AVR-2106 MSDOLBY H/P<CR>

DTS+DOLBY H/P ---Invalid at AVR-2106 MSDTS+DOLBY H/P<CR>

HOME THX CINEMA ---Invalid at AVR-2106 MSHOME THX CINEMA<CR>

THX5.1 ---Invalid at AVR-2106 MSTHX5.1<CR>

THX U2 CINEMA ---Invalid at AVR-2106 MSTHX U2 CINEMA<CR>

THX MUSIC MODE ---Invalid at AVR-2106 MSTHX MUSIC MODE<CR>

THX6.1 ---Invalid at AVR-2106 MSTHX6.1<CR>

THX SURROUND EX ---Invalid at AVR-2106 MSTHX SURROUND EX<CR>

WIDE SCREEN ---Invalid at AVR-2106 MSWIDE SCREEN<CR>

5CH STEREO Both are received as "5CH/7CH STEREO" , MS5CH STEREO<CR>

7CH STEREO the surround mode which changed return as EVENT. MS7CH STEREO<CR>

SUPER STADIUM ---Invalid at AVR-2106 MSSUPER STADIUM<CR>

ROCK ARENA MSROCK ARENA<CR>

JAZZ CLUB MSJAZZ CLUB<CR>

CLASSIC CONCERT ---Invalid at AVR-2106 MSCLASSIC CONCERT<CR>

MONO MOVIE MSMONO MOVIE<CR>

MATRIX MSMATRIX<CR>

VIDEO GAME MSVIDEO GAME<CR>

VIRTUAL MSVIRTUAL<CR>

- -

245

TF, TP, TM COMMAND : '*' parameters can NOT operate when INPUT source isn’t TUNER.

EVENT

PARAMETER function example

MS MPEG2 AAC ---Invalid at AVR model MSMPEG2 AAC<CR>

AAC+DOLBY EX ---Invalid at AVR model MSAAC+DOLBY EX<CR>

PS TONE DEFEAT ON PARAMETER setting PSTONE DEFEAT ON<CR>

TONE DEFEAT OFF TONE DEFEAT ON/OFF PSTONE DEFEAT OFF<CR>

SB:MTRX ON SURROUND BACK SP MODE set PSSB:MTRX ON<CR>

SB:NON MTRX ---MTRX ON = SURR.EX ON = DSCRT ON PSSB:NON MTRX<CR>

SB:PL2xCINEMA (@THX) (@ES DSCRT) PSSB:PL2xCINEMA<CR>

SB:PL2xMUSIC PSSB:PL2xMUSIC<CR>

SB:OFF PSSB:OFF<CR>

CINEMA EQ.ON CINEMA EQ. ON/OFF PSCINEMA EQ.ON<CR>

CINEMA EQ.OFF PSCINEMA EQ.OFF<CR>

MODE:MUSIC CINEMA / MUSIC / GAME / PL mode change PSMODE:MUSIC<CR>

MODE:CINEMA (This parameter can change DOLBY PL2,PL2x,NEO:6 mode.) PSMODE:CINEMA<CR>

MODE:GAME ---SB=ON：PL2x mode / SB=OFF：PL2 mode PSMODE:GAME<CR>

MODE:PRO LOGIC --- GAME can change DOLBY PL2 & PL2x mode PSMODE:PRO LOGIC<CR>

--- PL can change ONLY DOLBY PL2 mode

ROOM EQ:NORMAL ROOM EQ mode direct change PSROOM EQ:NORMAL<CR>

ROOM EQ:FRONT PSROOM EQ:FRONT<CR>

ROOM EQ:FLAT PSROOM EQ:FLAT<CR>

ROOM EQ:MANUAL PSROOM EQ:MANUAL<CR>

ROOM EQ:OFF PSROOM EQ:OFF<CR>

DELAY UP PSDELAY UP<CR>

DELAY DOWN PSDELAY DOWN<CR>

DELAY ***

AUDIO DELAY UP/DOWN , direct change to ***dB

***:000 to 999 by ASCII , 000=0ms, 200=200ms

---AVR2106 can be operated from 0 to 200 PSDELAY 200<CR>

TF UP TUNER Frequency UP/DOWN , direct change TFUP<CR> *

DOWN TFDOWN<CR> *

****** (6 digits) --- ****.** kHz at AM band (>050000 is AM.)

****.** MHz at FM band (<050000 is FM.)

TF105000<CR>

(1050.00kHz at AM)

TP UP TUNER PRESET CH UP/DOWN , direct change to No.** TPUP<CR>

DOWN TPDOWN<CR>

**(PRESET No.) TPA1<CR>

(PRESET No.”A1”)

TM TUNER BAND , MODE Select

AM ---Band set to AM TMAM<CR>

FM ---Band set to FM TMFM<CR>

AUTO ---Tuning mode set to AUTO mode TMAUTO<CR> *

MANUAL ---Tuning mode set to MANUAL mode TMMANUAL<CR> *

- -

246

EVENT(or RESPONSE) and PARAMETER list

EVENT PARAMETER function example *RES.

PW ON POWER ON/STANDBY change PWON<CR>

STANDBY PWSTANDBY<CR>

MV ** MASTER VOLUME change , **:00 to 99 by ASCII MV80<CR>

98 = +18dB(MAX)

80 = 0dB

00 = -80dB

99 = ---(MIN)

CV FL ** CHANNEL VOLUME change , **:00,32 to 62 by ASCII CVFL 50<CR>

FR ** 62 = +12dB(MAX) CVFR 50<CR>

C ** 50 = 0dB CVC 50<CR>

SW ** 38 = -12dB(MIN) CVSW 50<CR>

SL ** 00 = OFF (define ONLY SWch.) CVSL 50<CR>

SR ** CVSR 50<CR>

SBL ** (at SBch 2SP) CVSBL 50<CR>

SBR ** (at SBch 2SP) CVSBR 50<CR>

SB ** (at SBch 1SP) CVSB 50<CR>

MU ON OUTPUT MUTE ON/OFF change MUON<CR>

OFF MUOFF<CR>

SI PHONO INPUT source change SIPHONO<CR>

CD SICD<CR>

TUNER SITUNER<CR>

DVD ---Select DVD/VDP function at AVR-2106 SIDVD<CR>

VDP ---Invalid at AVR-2106 SIVDP<CR>

TV ---Select TV/DBS function at AVR 2106 SITV<CR>

DBS/SAT ---Invalid at AVR-2106 SIDBS/SAT<CR>

VCR-1 SIVCR-1<CR>

VCR-2 SIVCR-2<CR>

VCR-3 ---Invalid at AVR-2106 SIVCR-3<CR>

V.AUX SIV.AUX<CR>

CDR/TAPE1 ---Select CDR/TAPE function at AVR-2106 SICDR/TAPE1<CR>

MD/TAPE2 ---Invalid at AVR-2106 SIMD/TAPE2<CR>

*RES. : NOT returns '*' parameters as RESPONSE.

The PARAMETER of MV , CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 (J) section)

- -

247

Andere Handbücher für AVR-2106

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Denon Stereo-Receiver Handbücher

Denon

Denon AVR-1803 Bedienungsanleitung

Denon

Denon AVR-1611 Bedienungsanleitung

Denon

Denon AVR-1508 Bedienungsanleitung

Denon

Denon AVR-X1800H Bedienungsanleitung

Denon

Denon DRA-700AEDAB Bedienungsanleitung

Denon

Denon AVR-1908 Bedienungsanleitung

Denon

Denon AVR-985SP Bedienungsanleitung

Denon

Denon DRA-37 - AM/FM Stereo Receiver Bedienungsanleitung

Denon

Denon AVR-5800 Bedienungsanleitung

Denon

Denon AVR-2312CI Bedienungsanleitung

Denon

Denon AVR-X4400H Bedienungsanleitung

Denon

Denon AVR-2803 Bedienungsanleitung

Denon

Denon AVR-1601 Bedienungsanleitung

Denon

Denon AVR-1611 Bedienungsanleitung

Denon

Denon MULTEQXT AVR-4306 Bedienungsanleitung

Denon

Denon AVR-991 Bedienungsanleitung

Denon

Denon AVR-3808CI Bedienungsanleitung

Denon

Denon AVR-X6200W Bedienungsanleitung

Denon

Denon DRA-395 Bedienungsanleitung

Denon

Denon AVR-X4400H Bedienungsanleitung

Denon

Denon AVC-A11XVA Bedienungsanleitung

Denon

Denon AVR-4520CI Bedienungsanleitung

Denon

Denon AVR-2105 Bedienungsanleitung

Denon

Denon AVR-688 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7250BT Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Pioneer

Pioneer SC-LX904 Handbuch

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Pioneer

Pioneer SX-1000TA Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Pioneer

Pioneer SX-838 Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Pioneer

Pioneer XR-VS77 Bedienungsanleitung