Denso BHT-202Q Bedienungsanleitung
BHT-202Q/202QW-CE
Copyright © DENSO WAVE INCORPORATED, 2006
All rights reserved. No part of this publication may be reproduced in any form or by any means without
permission in writing from the publisher.
Specifications are subject to change without prior notice.
All products and company names mentioned in this manual are trademarks or registered trademarks of
their respective holders.
The latest precision manufacturing technology yields LCD panels whose pixels are 99.99% defect free.
The downside, note, is that up to 0.01% of the pixels can remain permanently dark or lit on today's
state-of-the-art panels.
A thin Newton's rings (rainbow-like patterns) may appear on the touch screen.
This does not necessarily indicate a problem with the touch screen.
If you leave the BHT with the battery cartridge discharged or with no battery cartridge
loaded or if you replace the battery cartridge in a wrong way, the BHT may lose the data
stored in it.
Before cold booting (refer to Chapter 2, Section 2.3.5 "Warm and Cold Booting"), it is
recommended that important data be saved into the FLASH folder or uploaded to the
host PC. Cold booting will erase all data stored in the RAM.
The shape of the projected area marker differs according to the original target market.
This hand-held scanner with built-in area marker should not be used in the United States and
Canada as it does not meet the specifications required for use there.
i
Preface
Please READ through these operating instructions carefully. It will enable you to operate your
BHT-202Q/202QW-CE correctly.
After you have finished reading the instructions, keep this manual handy for speedy reference.
ii
How this book is organized
This manual is made up of five chapters and appendices.
Chapter 1 Quick Guide
Describes the basic operating method of the BHT and the related notes.
Chapter 2 Getting Started the BHT and System Mode
Summarizes the BHT system configuration and describes the operation including preparation and
System Mode (which is required for the efficient use of application programs).
Chapter 3 Communications Operations of the BHT-202Q/202QW-CE
Describes the communications operations of the BHT-202Q/202QW-CE—the spread spectrum
communication (BHT-202QW-CE only), infrared communication, USB interface specifications, basic
communications specifications, communication using Ymodem, and ActiveSync--for data transfer with
the host PC or other devices.
Chapter 4 Error Messages
Lists the error messages which will appear on the LCD if some error occurs in the BHT.
Chapter 5 Handling the CU-200 (Option)
Describes the handling procedure of the communication unit CU-200, the interfacing with the host PC,
and the charging of the rechargeable battery cartridge.
Appendix A: Specifications
Appendix B: Loading an Optional Compact Flash Card
Appendix C: QualityAssurance Standards
iii
Related Publications
BHT-200 API Reference Manual
Screen Indication
The lettering in the screens in this manual is a little different from that in the actual screens. File names
used are only for description purpose, so they will not appear if you have not set files having those
names.
iv
SAFETY PRECAUTIONS
Be sure to observe all these safety precautions.
Please READ through these instructions carefully. They will enable you to use the BHT and CU
correctly.
Always keep this manual nearby for speedy reference.
Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in
bodily injury and substantial property damage. Make sure you fully understand all definitions of these
terms and symbols given below before you proceed to the text itself.
Alerts you to those conditions that could cause serious bodily injury or
death if the instructions are not followed correctly.
Alerts you to those conditions that could cause minor bodily injury or
substantial property damage if the instructions are not followed correctly.
Meaning of Symbols
Atriangle ( ) with a picture inside alerts you to a warning of danger. Here you see the warning
for electrical shock.
A diagonal line through a circle ( ) alerts you to something you should not do; it may or may
not have a picture inside. Here you see a screwdriver inside the circle, meaning that you
should not disassemble.
A black circle ( ) with a picture inside alerts you to something you MUST do. This example
shows that you MUST unplug the power cord.
v
Handling the battery cartridge
•Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could
cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury.
•Do not carry or store the battery cartridge together with metallic ball-point pens, necklaces,
coins, hairpins, etc.
Doing so could short-circuit the terminal pins, causing the batteries to rupture or the battery
fluid to leak, resulting in a fire or bodily injury.
•Avoid dropping the battery cartridge or letting it undergo any shock or impact.
Doing so could cause the batteries to break, generate heat, rupture or burn.
•Never charge the rechargeable battery cartridge where any inflammable gases may be
emitted; doing so could cause fire.
•Only use the dedicated charger (CU-200/CH-201/CH-251) for charging the rechargeable
battery cartridge.
Using a different type of charger could cause battery-rupture or leakage of battery fluid and
result in a fire, bodily injury, or serious damage to property.
Handling the BHT
•The BHT uses a laser light for indicating the scanning range. The intensity of the laser light
might be too low to inflict bodily injury. However, do not look into the laser beam.
The BHT complies with IEC 60825-1:1993+A2:2001 and 21 CFR 1040.10, 1040.11 except
for deviations pursuant to laser notice No. 50, dated July 26, 2001.
In accordance with Clause 8 and 9, IEC 60825-1, the following information is provided to the
user:
Caution - Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
•Do not look into the light source through the reading window or point the light source towards
the eyes.
The light emitted through the reading window is harmful to the eyes.
•Do not poke at the eyes with the stylus that comes with the BHT.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
vi
Handling the CU
•If smoke, abnormal odors or noises come from the CU, immediately unplug the AC adapter
from the wall socket or CU and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•If foreign material or water gets into the CU, immediately unplug the AC adapter from the wall
socket or CU and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•If you drop the CU so as to damage its housing, immediately unplug the AC adapter from the
wall socket or CU and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•Never use the CU for charging anything other than the specified battery cartridges.
Doing so could cause heat, battery-rupture, or fire.
•Never bring any metals into contact with the output terminals.
Doing so could produce a large current through the CU, resulting in heat or fire, as well as
damage to the CU.
•Never use the CU on the line voltage other than the specified level.
Doing so could cause the CU to break or burn.
•Use the dedicated AC adapter only.
Failure to do so could result in fire.
•If the power cord of the AC adapter is damaged (e.g., exposed or broken lead wires), stop
using it and contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
vii
Handling the battery cartridge
•Never charge a wet or damp rechargeable battery cartridge.
Doing so could cause the batteries to break, generate heat, rupture or burn.
Handling the BHT
•If smoke, abnormal odors or noises come from the BHT, immediately turn off the power, pull
out the battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
•If foreign material or water gets into the BHT, immediately turn off the power, pull out the
battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
•If you drop the BHT so as to damage its housing, immediately turn off the power, pull out the
battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
•Do not use batteries or power sources other than the specified ones; doing so could
generate heat or cause malfunction.
Never
disas-
semble
•Never disassemble or modify the BHT; doing so could result in an accident such as break or
fire.
•Never put the BHT in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
•Avoid using the BHT in extremely humid or dusty areas, or where there are drastic
temperature changes.
Moisture or dust will get into the BHT, resulting in malfunction, fire or electrical shock.
•In environments where static electricity can build into significant charges (e.g., if you wipe off
the plastic plate with a dry cloth), do not operate the BHT. Doing so will result in malfunction
or machine failure.
•Tap the LCD only with the stylus that comes with the BHT.
Using the tip of a pen or any pointed object will result in a damaged or broken LCD.
viii
Handling the CU
•Never disassemble or modify the CU; doing so could result in an accident such as fire or
malfunction.
•Never put the CU in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
•Avoid using the CU in extremely humid or dusty areas, or where there are drastic
temperature changes.
Moisture or dust will get into the CU, resulting in malfunction, fire or electrical shock.
•Never cover or wrap up the CU or AC adapter in a cloth or blanket.
Doing so could cause the unit to heat up inside, deforming its housing, resulting in a fire.
Always use the CU and AC adapter in a well-ventilated area.
•Do not place the CU anyplace where it may be subjected to oily smoke or steam, e.g., near a
cooking range or humidifier.
Doing so could result in a fire or electrical shock.
•Keep the power cord away from any heating equipment.
Failure to do so could melt the sheathing, resulting in a fire or electrical shock.
•Do not insert or drop foreign materials such as metals or anything inflammable through the
openings or vents into the CU.
Doing so could result in a fire or electrical shock.
•If you are not using the CU for a long time, be sure to unplug the AC adapter from the wall
socket for safety.
Failure to do so could result in a fire.
•When caring for the CU, unplug the AC adapter from the wall socket for safety.
Failure to do so could result in an electrical shock.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Denso Handheld Handbücher
