Denver CRP-718 Bedienungsanleitung

ENGLISH

FUNCTION AND CONTROLS

1. SNOOZE / SLEEP / DIMMER

2. DISPLAY

3. PM INDICATOR

4. STANDBY INDICATOR

5. ALARM 1 INDICATOR

6. ALARM 1 ON / OFF SET

7. ALARM 2 ON / OFF SET

8. << / TUNE - / YEAR/MONTH/DAY / C-F

9. >> / TUNE + / DST

10. VOLUME DOWN / DISPLAY LIGHT AUTO ON-OFF

11. VOLUME UP / TOGGLE BETWEEN DISPLAY CONTENTS ON-

OFF

12. CLOCK ADJ. / MEM.SET / M+ / NAP

13. ON / OFF RADIO / ALARM OFF

14. WEATHER FORECAST

15. ALARM 2 INDICATOR

16. TEMPERATURE SENSOR (IN DOOR) / HUMIDITY SENSOR

17. AC POWER CORD

18. FM ANTENNA

19. SPEAKER

20. BATTERY COMPARTMENT

21. RATING LABEL

ENG-1

DENVER CRP-718

LED DISPLAY MODE

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit

is equipped with a battery back up system, it requires a 3V CR2032

at lithium battery (not included). Insert the battery in the battery

compartment, making certain that the positive and negative (+ and -)

battery terminals are attached to the corresponding terminals on the

plate in the battery compartment. If an AC power failure occurs, the

clock automatically switches to the battery power supply, the clock and

timer memory continue running. When the AC power resumes, the

clock switches back to AC again.

TIME

ENG-2

TIME AND CALENDAR MANUAL SETTING

Setting Time and Calendar

Press Clock ADJ. (12) button in standby mode and keep depress over

2 seconds to enter time set mode, after enter the setting mode, press

Clock ADJ. button (12) to change the mode cycle as follows:

Normal → Year → Month → Day → 12/24 H format → Real time Hour

→ Real time Min → Normal

Action (during data adjustment):

- Press << / Tune - button (8) to adjust data backward.

- Press >> / Tune + button (9) to adjust data forward.

- Keep depressed << or >> button for 2 seconds to enable auto

forward.

- Use Clock ADJ. (12) button to conrm each setting.

ALARM SETTING

Setting Alarm 1 and Alarm 2

Press the alarm set button (6/7) during normal mode to show

the alarm time. Afterwards keep depress the alarm set button

(6/7) over 2 seconds to enter the alarm set mode. After enter

the setting mode, press the alarm set button (6/7) to change the

mode cycle as follows :

Normal → ALARM 1 Hour → ALARM 1 Min → ALARM 1 weekday

Alarm → ALARM 1 wake beep → ALARM 1 wake radio → ALARM 1

wake radio volume →Normal.

Normal → ALARM 2 Hour → ALARM 2 Min → ALARM 2 weekday

Alarm → ALARM 2 wake beep → ALARM 2 wake radio → ALARM 2

wake radio volume →Normal.

Select alarm weekday mode as follows:

1-5: Monday to Friday

1-7: Whole week

6-7: Saturday & Sunday

1-1: One day of week

ENG-3

Action (during data adjustment):

- Press << / Tune - (8) button to adjust data backward.

- Press >> / Tune + (9) button to adjust data forward.

- Keep depressed << or >> button for 2 seconds to enable auto

forward.

- Use ALARM 1 / ALARM 2 set button to conrm each setting.

ALARM

Beep alarm or radio alarm will ring for 30 minutes if no key is pressed,

then it will stop automatically and wait for same alarm time on next

day.

Enable / disable the Alarm

Press and hold the “ALARM 1” (6) / “ALARM 2” (7) button to enable or

disable the alarm. Once the alarm is activated, the bell symbol will be

appeared on the display.

SNOOZE FUNCTION

When Alarm rings, press Snooze button (1) to suspend the alarm & to

activate the snooze function, Beep or Radio alarm will stop. 9 minutes

later the alarm will ring again. Press SNOOZE button (1) again, alarm

will be suspended again, another 9 minutes later the alarm will ring

again and so on until the next alarm rings.

Note: The interval time of the Snooze function is 9 minutes.

- If you want to disable the SNOOZE function and stop alarm

completely, press Radio ON/OFF button (13). If you don’t press any

button, the alarm will ring during 30 minutes & stop automatically.

- Icon of ALARM 1 and ALARM 2 will blink as long as Snooze

function is still operating. Once Snooze is turned off icon of ALARM

1 / ALARM 2 stop blinking and lights on the display.

SLEEP OPERATION

When you listen to the radio, press the SNOOZE/SLEEP/DIMMER

(1) button to enter into the sleep mode. You can adjust the sleep timer

from 90 minutes to 15 minutes by pressing repeatedly the SNOOZE/

SLEEP/DIMMER button (1). When sleep timer is selected, the unit will

automatically turn off once time is up.

ENG-4

DIMMER CONTROL

The dimmer button (1) allows you to set the brightness of the LED

display to high, medium and low 3 levels.

DISPLAY LIGHT AUTO ON/OFF FUNCTION

1. Press display light auto on-off button (10) for 3 seconds, the LED

display indicator will light on, the LED display will turn off after 15

seconds automatically.

Press any button to maintain the LED display for 15 seconds.

2. Press display light auto on-off (10) button for 3 seconds, the LED

display indicator will light off to cancel this function.

NAP timer function (count down timer)

During radio off mode, press MEM.SET / M+ / NAP button (12) to turn

on NAP mode, the NAP time will keep by 5 seconds, within 5 seconds

and press MEM.SET / M+ / NAP button (12) button can change the

duration from 90 min – 10 min.

The alarm buzzer will sound for 30 min and then shut off automatically.

To stop the alarm buzzer, press the ON/OFF button (13).

Press the MEM.SET / M+ / NAP button (12) has no effect during alarm

operation. Press ON/OFF button (13) to cancel NAP function.

DAYLIGHT SAVING TIME (DST) MODE

For countries with daylight saving time (DST) (one hour of difference

between summer time and winter time), this clock radio offers you DST

option to adjust summer time.

In standby mode press and hold for 2 seconds the >>/TUNE+/DST

button (9).

The clock advances by one hour. To exit DST mode, repeat the above

operation.

AUTO TOGGLING BETWEEN DISPLAY CONTENTS

In clock mode, press and hold DISPLAY button (11) for 3 seconds.

“ON” appears on the display. Then the display automatically shows

below contents in 5-10 second intervals.

Current time > Month, Day > Temperature > Humidity

To deactivate this function, press and hold DISPLAY button (11) for 3

seconds. “OFF” appears on the display, then the display switches back

ENG-5

to the clock mode.

Contents in 10-second intervals

Contents in 5-second intervals

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and

extended to have the best FM reception.

1. Press the Radio ON/OFF button (13) to turn the unit on.

2. Use the Tune - (8) or Tune + (9) button to select the desired radio

station. If you press and hold the Tune – (8) or Tune + (9) button for

one second, then release, the unit will automatically scan to the next

broadcasting station.

3. Press the ON/OFF button (13) to turn the radio OFF.

To set / recall the radio presets

1. Press the ON/OFF button (13) to turn the unit ON.

2. Use the Tune + or Tune - button to select the desired radio station.

3. Press and hold the memory / memory + button; “P01” will blink in the

display.

TIME

ENG-6

4. Use the Tune+ or Tune- button to select the desired preset station

(P01-P10)

5. Press the memory / memory + button again to set the preset.

6. Repeat steps 2 through 5 to set more presets.

7. The unit can preset 10 stations totally for FM.

8. When “P01-P10” is blinking, press the Tune+ or Tune- button to

select the preset number.

9. When recalling preset stations, press memory / memory + button to

select the preset number.

TO USE THE WEATHER FORECASTER

There is a built-in humidity sensor in your unit to make the weather

forecast. There are four types of weather display in your weather

station (please note that the weather graphics may look a little different

to those on your unit)

Remarks: for better use of your weather station, place your unit at

a location with open air circulation e.g. close by an open window.

Placing it at an air-conditioned environment will affect its accuracy.

After your weather station is powered up, it will take around 3 hour to

get stable. The weather icons on the display give a reference to the

next 12-24 hours weather conditions. It may not match with the current

weather condition outside.

Predictions accuracy: 70%; prediction of the considerable weather

changes (for example, from sunny weather to rain) is more accurate

then prediction of negligible weather changes (from partly cloudy to

cloudiness).

ENG-7

Weather station predicts possible weather, thus symbols could

not agree with current weather. Forecast: SUNNY for night means

cloudless sky.

Humidity sensor specication:

Operating temperature range : 10 ~ 50ºC

Operating humidity range : 30 ~ 95%

If temperature is below 10ºC or higher than 50ºC, The LED display will

show - - % for humidity and not show the weather forecast.

RESETTING

If the system does not respond or exhibits erratic or intermittent

operation, you may have experienced an electrostatic discharge (ESD)

or a power surge that triggered the internal microcontroller to shut

down automatically. If this occurs, simply disconnect the ac power

cord and remove the system backup battery, wait for at least 3 minutes

and then setup the unit again as if it is a brand new unit.

SPECIFICATIONS

Frequency range : FM 87.5 – 108 MHz

Battery backup : 3V (CR2032 Flat Lithium battery x 1) not included

Power supply : AC 230V 50Hz

Temperature range for Indoor : 0 to + 50°C or 32 to 122 °F

Humidity range for indoor : 30% to 95%

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

ENG-8

www.denver-electrionics.com

Electric and electronic equipment contains materials, components and

substances that can be hazardous to your health and the environment,

if the waste material (discarded electric and electronic equipment) is

not handled correctly.

Electric and electronic equipment is marked with the crossed out

trash can symbol, seen below. This symbol signies that electric and

electronic equipment should not be disposed of with other household

waste, but should be disposed of separately.

All cities have established collection points, where electric and

electronic equipment can either be submitted free of charge at

recycling stations and other collection sites, or be collected from

the households. Additional information is available at the technical

department of your city.

Fill in the blank with the model number of this player, so you can nd it

again later.

Imported by:

DENVER ELECTRONICS A/S

Stavneagervej 22, DK-8250 EGAA, DENMARK

www.facebook.com/denverelectronics

ENG-9

SVA PRAVA SU ZADRŽANA, AUTORSKA PRAVA DENVER ELECTRONICS

A/S

www.denver-electrionics.com

Električna i elektronička oprema sadrže materijale, komponente i tvari

koji mogu biti opasni za vaše zdravljei okoliš ako se otpadni materijal

(odbačena električna i elektronička oprema) ne odlože na propisani

način.

Električna i elektronička oprema i baterije su označene prekriženim

simbolom otpada, kako je viđeno gore. Ovaj simbol označava da se

električka i elektronička oprema ne smiju odlagati zajedno s ostalim

kućnim otpadom, već se moraju odlagati zasebno.

Svi gradovi su odredili sabirna mjesta na kojima se električna i

elektronička oprema mogu besplatno odložiti ili pokupiti iz kućanstva.

Dodatne informacije su dostupne u tehničkom odjeljenju vašeg grada.

Molimo unesite u prazno polje broj modela ovog uređaja za

reprodukciju kao referencu za ubuduće.

Uvoznik:

TEHNOCENTAR D.O.O.

Prilaz Ivana Visina 7, 10020 Zagreb, Hrvatska

www.facebook.com/denverelectronics

CRO-8

Inhaltsverzeichnis

Andere Denver Radiowecker Handbücher

Denver

Denver CRQ-110 Bedienungsanleitung

Denver

Denver CRP-121 Bedienungsanleitung

Denver

Denver DAB-45PLUS Bedienungsanleitung

Denver

Denver CRL-330 Bedienungsanleitung

Denver

Denver CR-323 Bedienungsanleitung

Denver

Denver TR-52 Technisches Datenblatt

Denver

Denver CRP-512 Bedienungsanleitung

Denver

Denver CRD-510 Bedienungsanleitung

Denver

Denver CRP-912 Bedienungsanleitung

Denver

Denver CRP-714 Bedienungsanleitung

Denver

Denver CR-420 Bedienungsanleitung

Denver

Denver CRP-617 Bedienungsanleitung

Denver

Denver CRP-615 Bedienungsanleitung

Denver

Denver CRL-310 Bedienungsanleitung

Denver

Denver CRB-618 Bedienungsanleitung

Denver

Denver CRP-514 Bedienungsanleitung

Denver

Denver CR-415 Bedienungsanleitung

Denver

Denver CR-418 Bedienungsanleitung

Denver

Denver REC-34 Bedienungsanleitung

Denver

Denver CR-414 Bedienungsanleitung

Denver

Denver CRP-612 Bedienungsanleitung

Denver

Denver CR-419 MK2 Bedienungsanleitung

Denver

Denver CRL-310 Bedienungsanleitung

Denver

Denver REC-34 Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung

Sony

Sony DREAM MACHINE ICF-C318 Bedienungsanleitung