Denver DPF-591 Bedienungsanleitung

CONTENTS

Important Safeguards …………………………………………..…......... ……… 1

Frequently Asked Questions ………………………………………………………4

Control Buttons ………………………………………………….…………… 5

Control Functions ……………………………………………….... …………… 5

Glossary of Terms………………………………………........... .... ………………… 8

Technical Specifications……………………………..………............... ………… 9

Important Safeguards

IMPORTANT SAFEGUARDS

Signal Word Definitions

DANGER- Indicates an imminently hazardous situation, which, if not avoided, will result in

death or serious injury. Usage of this signal word is limited to the most extreme situations.

WARNING- Indicates a potentially hazardous situation, which, if not avoided, could result in

death or serious injury.

CAUTION-indicates a potentially hazardous situation, which if not avoided, may result in

minor/moderate injury or product/property damage. it also alerts against unsafe practices.

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or

moisture.

WARNING: To prevent the risk of electric shock, do not remove cover. No user-serviceable parts

inside. Refer servicing to qualified personnel.

READ ALLINSTRUCTIONS BEFORE USE.

WARNING—To reduce the risk of fire, electric shock, or serious personal injury:

HEED WARNINGS. Adhere to all warnings in the operating instructions and on the Digital

photo frame itself.

zWATER AND MOISTURE. Do not use the unit water or expose to rain or moisture.

zATTACHMENTS. Use only manufacturer-recommended attachments or accessories.

zACCESSORIES. Do not place the Digital Photo Frame on an unstable cart, stand, tripod,

bracket, or table. The unit may fall, causing injury to you and serious damage to the product.

zVENTILATION. Position the Digital Photo Frame so that its location does not interfere with

its proper ventilation. For example, the unit should not be situated on a bed, sofa, tug or similar

surface that may block the ventilation opening, or placed in a built-in installation, such as a book-

case or cabinet, that may impede the flow of air through the ventilation openings.

zHEAT. Position the digital Photo Frame away from sources of high heat such as radiators or

stoves.

zPOWER CORD PROTECTION. Don’t walked on the power cord, and pay particular attention

to the point where the cord attaches to the Digital Photo Frame.

zNON-USE. Unplug the power cord from the outlet when the unit is not in use.

zAVOIDING SURGES. For added protection during lightning storm, unplug the Digital Photo

Frame from the wall outlet to prevent damage to the product due to power line surges.

zOVERLOADING. Do not overload wall outlets or extension cords.

zOBJECT AND LIQUID ENTRY. Do not place objects onto or spill liquids on or inside the

Digital Photo Frame.

zDAMAGE REQUIRING SERVICE. Seek service by qualified service personnel when:

--The power supply has been damaged.

--Liquid has been spilled onto the Digital Photo Frame.

--The unit has been exposed to rain.

--The unit does not operate normally, or exhibits a marked change in performance.

--The unit has been dropped or physically damaged

zSERVICING. Do not attempt to service the Digital Photo Frame beyond those means

described in these operating instructions. All other servicing should be referred to qualified service

personnel.

CAUTION—To reduce the risk of personal injury or product/property damage:

zCLEANING. Clean the outer surface of the Digital Photo Frame (excluding the screen)gently

using a soft cloth dampened with water. Clean the screen only with a specified cleaning solution for

use with products such as laptops and computer monitors. These are available at most retail

consumer electronics stores. Do not clean the inside of the unit

Condensation

If cold water is poured into a glass, water droplets form on the outside of the glass. This is called

condensation. Condensation may occur on internal operating parts of the product. Condensation

occurs:

zWhen the product is brought from the outdoors into a warm room, or if it is in a cold room

which is heated quickly.

zIf the unit is moved occur, the product may not operate properly if condensation occurs. Wait1-

2 hours (to allow the internal parts to adjust to the surrounding temperature) before using the

product.

Frequently asked questions

Q: How to set my Digital Photo Frame?

A: The Digital photo Frame setup is very easy after following up the Users’ Manual Direction. just

plug the power adapter into the power jack( back side of the Digital Photo Frame) and plug the power

cord into a standard 100-240 volt AC electrical outlet. Next, insert a memory card into the card slot

and slide the power Switch to ON.

.Q: What kind of memory card does the Digital Photo Frame read?

A: The Digital photo Frame can read all the popular memory cards including the large capacity of

32MB-4GB and above, which included MMC/SD/MS card.

Q: What kind of media format does the Digital Photo Frame support?

A: The Digital Photo Frame can support JPEG picture format

Q: The adaptor of the Digital Photo Frame already be connected, why it is still no display?

A: The Adapter doesn’t be connected to the Photo Frame or the Power Switch is not in the ON

SAVETHESEINSTRUCTIONSFORFUTUREREFERENCE

position.

Q:I already insert the memory card into the Digital Photo Frame, why can’t see any image?

A: Firstly, make sure that the memory card is same as mentioned above. Secondly, turn off the Digital

Photo Frame and make sure that the memory card is inserted correctly . Thirdly, restart the frame, the

Digital Photo Frame will read your memory card automatically, finally, make sure that you select the

correct Mode from the next menu: photo for still images.

NOTE: Some digital cameras save images in non-standard format. Please refer to your camera’s

instruction manual for details.

Q: Does the Digital Photo Frame support all JPEG format?

A: No, the Digital Photo Frame only support the standard JPEG format.

Control buttons

1. Left / Last

2.Right / Next

3. Play/pause/confirm

4. Menu

5. Switch, clock/calendar

6. Exit

7. Power switch, long press to switch on / off

Control Functions

Photo

Insert the power firstly, long press “Power switch” to switch on.

Before to play, confirm the file source come from U disk or SD/MMC/MS card. Press Left/Right key

to select.

In the Photo mode, six images will be showed one time on the screen for easy image selection.

Select the image by pressing Left or Right button.

Press Play to confirm, then can view the selected image.

Press Exit button return to the thumbnail state.

View images

When viewing an image, press the Left button to view the previous image.

When viewing an image, press the Right button to view the next image.

Setup menu

Press Menu button to enter the setup menu.

Select the function by pressing Left and Right button.

Press Play button to confirm.

Press Exit button to exit from the menu.

Image Size

Press Menu button to enter, select Image Size by pressing Left and Right button, press Play to

confirm, then press Left and Right to select. There are three options: Auto Fit (4:3), Optimal

(16:9,full screen) or Full (16:9, extend the pictures ratio basic on the full screen 16:9).Select the

mode you want to set , then Exit.

Play：

It will enter the selected picture when you press Play button for the first time. Press again, it

will enter to play; when the picture is playing automatically it will pause if you press again.

Press again it will continue to play automatically.

Slide show Effect

1）Random

2) Split horizontal in 3) Split horizontal out

4) Jalousie 5) Split vertical in

6) Split vertical out 7) Radiation

8) Surround 9) Fade

10) Refresh from left to right 11)Refresh from up to down

12) Translation from down to up 13)Roll from down to up

14) Roll from up to down 15）Brick

Slide Show interval

Press Menu button to enter, select the Slide Show interval, then press Play to confirm.Press Left /Right to

adjust the time you want to set(There are options from 1Second ~3 hours). Press Play to confirm, then exit.

Split Slide show

Press Menu button to enter, select Split Slide show，then press Play to confirm; there have 2 options:

On/Off，press Play to confirm and press again to exit. Will show as below when play picture again.

Start the Slide show

Press Menu button to enter, select start the Slide show,then press Play to confirm and the pictures will

be played automatic.

Rotate

Press Pause when playing picture, then press Menu button to enter. Select the rotate function, then

press Play to rotate 90 degrees clockwise per time, press again rotate 90 degrees gain. After finished,

press Exit to exit.

Zoom

Press Pause when playing picture, then press Menu and select Zoom function. The image can be enlarged

up to 5 times by press PLAY button continuously, on the 6th times it will revert to the original size.

Save picture

Press Pause when playing picture, then press Menu and select this function, press Play to confirm. There

are two options: YES/NO. Press Play to confirm the selection, then exit.

Delete File

Select the file you want to delete when return to 6 thumbnail pictures display. Press Menu button to enter

and select the file, then press Play to confirm. There are two options: YES/NO. Press Play to confirm the

selection, then exit.

Format memory

Press Menu button to enter, select Format memory and press Play to confirm. There are two options:

YES/NO, press Play to confirm the selection, then exit.

Reset setting

Select this function and confirm, all the setting will return to the original setting.

Language

Press Menu button to enter, select the language you want to set, press Play to confirm, then exit.

1）English 4）Italian

2）German 5）Polish

3) Spanish 6）Swedish

7）Finnish

Brightness, Contrast, Color and Tint

Adjust Brightness, Contrast, Color and Tint for the display screen.

Press Menu button to enter, select the function and press Play to confirm, then exit.

1） Brightness: Press confirm button to enter and adjust the Brightness by pressing Left and Right button,

then press Play to confirm, then exit.

2） Contrast: Press confirm button to enter and adjust the Contrast by pressing Left and Right button,

then press Play to confirm, then exit.

3） Color: Press confirm button to enter then adjust the Color by pressing Left and Right button, then press

Play to confirm, then exit.

4） Tint: Press confirm button to enter then adjust the Tint by pressing Left and Right button, then press

Play to confirm, then exit.

Time

Press Menu button under the main interface, select Time and press Play to select Year/Month/Day. Press

Play again and set the Time by Left or Right button, press Play to confirm and save.

Press Switch to switch to analog clock, press the second time will switch to the calendar mode, press

Exit to exit.

Long press “Power switch”to switch off. The clock / calendar time cann’t resume the reset settings

after power off.

Glossary of terms

Aspect Ratio

Tee ratio of the length of an image to its width. Most computer screens and digital cameras shoot images that

have an aspect ratio of 4:3./ 16:9

35mm film and some digital cameras shoot images that have an aspect ratio 3:2.

BITMAP

A type of graphics format that specifies a number of pixels and then specifies what color those pixels are.

BMP

An uncompressed bitmapped file format used with Microsoft Windows.

Downsampling

The process of reducing the size of an image by decreasing the resolution (number of pixels) in an image.

Memory Card

The system used to store images by most digital cameras. Is different with a computer memory card, this

card can retains data safely.

JPEG

Joint photographic Experts Group; the development group for a compressed 24-bit color image storage

format that also bears its name.

Mega Pixel

One million pixels. A high mega pixel rating typically equates to a high maximum performance for graphics,

or better quality pictures for digital cameras.

Resolution

The amount of pixels that are displayed on a screen measured in pixels horizontal by pixels vertical,

such as 1024*768. The higher the resolution, the more pixels and greater detail can be displayed.

Lower resolutionAre interpolated and may lose detail.

Slideshow

A display of a series of selected images.

Thumbnail

A small representation of a larger graphic often used to display several graphics at once

and allowing easy Sorting through images.

Technical specifications

Input formats： MMC/SD/MS

Supported file formats： JPEG

Display 7”LCD monitor，Resolution：480*234

Viewing mode： Full-screen 16:9/4:3 Stand Standard Aspect Ratio, Slide show, or

thumbnail.

Power input： 100-240VAC, 50/60Hz

Power output： 5VDC, 1A

Accessories： User manual, Adapter

Model number： DPF-591/DPF-592

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Denver Digitaler Bilderrahmen Handbücher

Denver

Denver PFF-1514W Bedienungsanleitung

Denver

Denver DPF-741 Bedienungsanleitung

Denver

Denver 119101030030 Bedienungsanleitung

Denver

Denver PFF-1514B MK2 Bedienungsanleitung

Denver

Denver PFF-1015 Bedienungsanleitung

Denver

Denver PFF-1037 Bedienungsanleitung

Denver

Denver Frameo PFF-711 Wit Bedienungsanleitung

Denver

Denver DPT-770 Bedienungsanleitung

Denver

Denver PFF-710BLACK MK2 Bedienungsanleitung

Denver

Denver PFF-1011BLACK Bedienungsanleitung

Denver

Denver PFF-710BLACK Bedienungsanleitung

Denver

Denver 119101010030 Bedienungsanleitung

Denver

Denver DP-1030 Series Bedienungsanleitung

Denver

Denver PFF-1010BLACK Bedienungsanleitung

Denver

Denver PFF-1017 Bedienungsanleitung

Denver

Denver DPF-407 Bedienungsanleitung

Denver

Denver PFF-1041B Bedienungsanleitung

Denver

Denver PFF-1053 Bedienungsanleitung

Denver

Denver PFF-1015B Bedienungsanleitung

Denver

Denver DPF-593 Bedienungsanleitung

Denver

Denver PFF-1011WHITE MK2 Bedienungsanleitung

Denver

Denver PFF-1017BLACK Bedienungsanleitung

Denver

Denver DPF-567 Bedienungsanleitung

Denver

Denver PFF-1010WHITE Bedienungsanleitung

Beliebte Digitaler Bilderrahmen Handbücher anderer Marken

LENCO

LENCO DF-830 Bedienungsanleitung

NIX

NIX Advance X10G Bedienungsanleitung

Nextar

Nextar N7S-100 Bedienungsanleitung

Sungale

Sungale TD350A Bedienungsanleitung

texet

texet DPF-830 Montageanleitung

Philips

Philips SPF2017 Bedienungsanleitung

Philips

Philips SPF1327 Bedienungsanleitung

Philips

Philips SPF7010/10 Bedienungsanleitung

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Bedienungsanleitung

ViewSonic

ViewSonic VFM1042-52 Bedienungsanleitung

YURAKU

YURAKU YUR.PHOTO 7B4C Bedienungsanleitung

Pandigital

Pandigital PAN8000DWPCF1 Bedienungsanleitung

Rekam

Rekam Deja View HD-850 Bedienungsanleitung

Majestic

Majestic DF 918HD MP3 Bedienungsanleitung

ViewSonic

ViewSonic DPF8-CAM Bedienungsanleitung

Philips

Philips SPF2527 Bedienungsanleitung

Digital Foci

Digital Foci Image Moments IMT-063 Bedienungsanleitung

Nokia

Nokia SU-4 Bedienungsanleitung