Denver BFH-13 Bedienungsanleitung
BFH-13 FITNESS BAND
User’s Guide
www.denver-electronics.com
www.facebook.com/denverelectronics
ENGLISH
ENG-1
1. Features
0.96" 96x64 OLED Display
Built-in HR sensor, monitor your heart rate
Monitor your daily activity and sleep
Built-in sedentary reminder
Display SMS, emails, calendar events and social media activity
Smart wake-up, raise or shake your arm to wake up the device
Built-in 90mAh Li-poly battery, up to 15 days standby time
Compatible with iOS8 or above and Android 4.4 or above
IP68 waterproof
2. Download Obeat app
The fitness band need to pair with the smart phone through app.
Search for Obeat APP on Apple App Store or Google Play store for
android version or scan below QR code to install Obeat APP.
Android
iOS
This device is enabled with Bluetooth 4.0, support phone with
Android4.3/ iOS8.1 or above
3. Pair the device
Please make sure the Bluetooth is ON in your smartphone
settings and then open app “Obeat”. Tap “Device” --> “BIND
BRACELET”.
When searching and pairing device, please press on the touch
ENG-2
area of device and activate the device (screen on). App will search
the device automatically, select the device name in the smart
phone searching list and connect the device to the app.
After binding successfully, all information on device will sync on
APP, including time, steps, heart rate and notifications reminder.
Note: Data on the smart bracelet will be reset at the end of each
day. If you synced the data to APP before reset, the data could be
stored on APP for a month.
4. Device Activate & Charge
Make sure the device is charged before initial use. In case device
is low on battery, connect the device to the charger clip and
connect USB cable to your PC. The device will automatically boot
up (please clamp the charging clip to the back 3 point position of
bracelet as below)
ENG-3
5. How to use
Once the device connected to the app successfully, it will sync
your activities and sleep data automatically, please press the
touch area on the device to switch into different display modes as
following:
5.1 Normal Mode
Time Mode --> Heart rate Mode --> Step Mode -->
Distance Mode --> Calories Mode -->
Smart activate screen Mode --> Power off
Note: Alarm mode will only display on the device after switch
turn ON in the APP.
Reset to factory default: Long press touch area around 10 seconds
on Power off menu.
Touch Area
Tap: function switch
Long press: activate, mode switch
ENG-4
5.2 Notification Mode
Incoming call reminder Massage reminder
Alarm reminder Sedentary reminder
ENG-5
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to
your health and the environment, if the waste material
(discarded electric and electronic equipment and batteries) is not
handled correctly.
Electric and electronic equipment and batteries is marked with
the crossed out trash can symbol, seen below. This symbol
signifies that electric and electronic equipment and batteries
should not be disposed of with other household waste, but
should be disposed of separately.
As the end user it is important that you submit your used
batteries to the appropriate and designated facility. In this
manner you make sure that the batteries are recycled in
accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and
electronic equipment and batteries can either be submitted free
of charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available
at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type
BFH-13 is in compliance with Directive 2014/53/EU. The full text
ENG-6
of the EU declaration of conformity is available at the following
internet address:
http://www.denver-electronics.com/denver-bfh-13/
Operating Frequency Range: 2.402GHz—2.480GHz
Max Output Power: 4.0DB
Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
BFH-13 FITNESSBAND
Bedienungsanleitung
www.denver-electronics.com
www.facebook.com/denverelectronics
DEUTSCHE
GER-1
1. Funktionen
0,96" 96 x 64 OLED-Display
Integrierter Herzfrequenzsensor; überwacht Ihre Herzfrequenz
Ü berwachen Sie Ihre täglichen Aktivitäten und Ihren Schlaf
Integrierte Erinnerung für Bewegungsinaktivität
Anzeige von SMS, E-Mails, Kalendereinträgen und Social-
Media-Aktivitäten
Intelligentes Aufwachen; heben oder schütteln Sie Ihren Arm,
damit Ihr Gerät aufweckt
Eingebaute 90 mAh Lithium-Polymer-Batterie, bis zu 15 Tagen
Standby
Kompatibel mit iOS8 oder höher und Android 4.4 und höher
Wasserdicht nach IP68
2. Herunterladen der Obeat-App
Das Fitnessband muss über die App mit dem Smartphone
verbunden werden. Suchen Sie im Apple App Store oder bei
Google Play nach der Android-Version der Obeat-App oder
scannen Sie nachfolgenden Code, um die Obeat-App zu
installieren.
Android
iOS
Dieses Gerät ist mit Bluetooth 4.0 ausgerüstet und unterstützt
Android 4.3 / iOS 8.1 oder höher
Inhaltsverzeichnis
Sprachen:
Andere Denver Fitness-Tracker Handbücher
Denver
Denver BFH-17 Bedienungsanleitung
Denver
Denver BFA-10 Bedienungsanleitung
Denver
Denver BFH-242 Bedienungsanleitung
Denver
Denver BFH-252 Bedienungsanleitung
Denver
Denver BFH-14 Bedienungsanleitung
Denver
Denver BFK-312C Bedienungsanleitung
Denver
Denver BFG-550 Bedienungsanleitung
Denver
Denver SWC-363 Bedienungsanleitung
Denver
Denver BFG-551 Bedienungsanleitung
Denver
Denver BFH-19 Bedienungsanleitung
Denver
Denver BFH-242 Bedienungsanleitung
Denver
Denver BFH-153 Bedienungsanleitung
Denver
Denver BFH-250 Bedienungsanleitung
Denver
Denver BFH-19 Bedienungsanleitung
Denver
Denver BFA-10 Bedienungsanleitung
Denver
Denver BFH-14 Bedienungsanleitung
Denver
Denver BFH-240 Bedienungsanleitung
Denver
Denver BFH-147 Bedienungsanleitung
