Denver IR-110 Bedienungsanleitung

Instruction manual

IR-110

GB-1

SAFETY PRECAUTIONS

- Read all the instructions carefully before using the unit and keep them for

future reference.

- Check that the voltage marked on the rating label matches your mains

voltage.

- The unit must be placed on a flat stable surface and should not be

subjected to vibrations.

- Do not place the unit on sloped or unstable surfaces as the unit may fall off

or tip over.

- The mains socket must be located near the unit and should be easily

accessible.

- Avoid extreme degrees of temperature, either hot or cold. Place the unit

well away from heat sources such as radiators or gas/electric fires. Avoid

exposure to direct sunlight and other sources of heat.

- Never place any type of candle or naked flame on the top of or near the

unit.

- To reduce the risk of fire, electric shock or product damage, do not expose

this unit to rain, moisture, dripping or splashing. No objects filled with

liquids, such as vases, should be placed on the unit.

- If you spill any liquid into the unit, it can cause serious damage. Switch it

off at the mains immediately. Withdraw the mains plug and consult your

dealer.

- To prevent the risk of electric shock or fire hazard due to overheating,

ensure that curtains and other materials do not obstruct the ventilation

vents.

- Do not install or place this unit in a bookcase, built-in cabinet or in another

conned space, ensure that a minimum of 10cm should be kept around the

apparatus for ventilation.

Safety

- Always disconnect the unit from the mains supply before connecting/

disconnecting other devices or moving the unit.

- Unplug the unit from the mains socket during a lightning storm.

- This unit will become warm when used for a long period of time. This is

normal and does not indicate a problem with the unit.

GB-2

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the unit’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the manual accompanying

the unit.

Mains Adapter

- Make sure the unit is not resting on top of the mains adapter cable, as the

weight of the unit may damage the mains cable and create a safety hazard.

- If the mains adapter is damaged it must be replaced by the manufacturer,

its service agent, or similarly qualied persons in order to avoid a hazard.

Interference

- Do not place the unit on or near appliances which may cause

electromagnetic interference. If you do, it may adversely affect the

operating performance of the unit, and cause a distorted sound.

Supervision

- Children should be supervised to ensure that they do not play with the unit.

- Never let anyone especially children push anything into the holes, slots or

any other openings in the case - this could result in a fatal electric shock.

Service/Maintenance

- To reduce the risk of electric shock, do not remove screws. The unit does

not contain any user serviceable parts.Please leave all maintenance work to

qualified personnel.

- Do not open any fixed covers as this may expose dangerous voltages.

- Ensure to unplug the unit from the mains socket before cleaning.

- Do not use any type of abrasive pad or abrasive cleaning solutions as these

may damage the unit's surface.

- Do not use liquids to clean the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

GB-3

product overview

front view

rear view

1. Display

2. STANDBY Button

3. MODE Button

4. MEMORY Button

5. BACK Button

6. Remote Control Sensor

7. VOLUME Dial/

SELECT/SNOOZE Button

8. INFO / Button

9. MENU Button

10. Button

11. Button

12. Antenna

13. NETWORK port

14. Headphone Jack

15. AUX IN Jack

16. USB 5V 1A

Charging Port

17. DC Input Jack

GB-4

remote control

1. STANDBY Button

2. INFO Button

3. MENU Button

4. Button

5. Button

6. SELECT Button

7. VOLUME – Button

8. Button

9. TUNING Button

10. Button

11. Button

12. MONO/ST. Button

13. SLEEP Button

14. MODE Button

15. MEMORY Button

16. BACK Button

17. Button

18. VOLUME + Button

19. TUNING Button

20. Button

21. MUTE Button

22. EQ Button

23. SNOOZE Button

24. ALARM Button

13 23

battery replacement for the remote control

Press down on the compartment cover, and slide the cover off to open the

compartment. Place the CR2025 battery in the remote control according to

polarity markings (“+” and “-”)

inside the compartment and on the

battery.

Place the cover into the

compartment, press down lightly,

and push it inside until is snaps on.

CR2025







GB-5

remote control operation range

• The remote control sensor on the front

unit is sensitive to the remote control’s

commands up to a maximum of 4

metres away and within a maximum of

60° arc.

• Please note that the operating distance

may vary depending on the brightness

of the room.

Handling the Battery

Improper or incorrect use of batteries may cause corrosion or battery

leakage, which could cause fire, personal injury or damage to

property.

Only use the battery type indicated in this manual.

Do not dispose of the used battery as domestic waste. Dispose of it

in accordance with local regulations.

Remove the battery from the remote control when not in use for a

long period of time, as corrosion or battery leakage may occur and

result in physical injury, and/or property damage, and/or fire.

Danger of explosion if battery is incorrectly replaced

Replace only with the same or equivalent type.

Connecting the unit to any other power source may cause damage

to the unit.

Connecting to the Mains Supply

Unwind the mains adapter cable to its full length. Connect the mains adapter

to the mains socket. The unit is now connected and ready to use.

GB-6

Network Connection

Wired network

1. Check first of all whether the control lamps (LINK/ACT) of your LAN

connection or your router light up.

2. Connect the NETWORK socket on the unit to the corresponding port on

your Router using a commercially available LAN or Ethernet cable (CAT5 or

better with RJ45 connector).

3. Proceed with the operations described in the below “GETTING STARTED”.

It is not necessary to run through the setup wizard.

4. Using a wired network provides a better performance than a wireless

connection because the attached devices connect directly to the network

and are not subject to radio frequency interference.

Wireless network

1. Check first of all whether the control lamps (LINK/ACT) of your LAN

connection or your router light up.

2. Proceed with the operations described in the below “GETTING STARTED”.

It is highly recommended to run through the setup wizard in the System

Settings section.

This unit cannot be connected to a standalone modem directly. A

router or a modem incorporated with a router has to be used.

Since there are various connection congurations, please follow the

specications and instructions of your telecommunication carrier,

Internet service provider, and router setting guidebook.

GETTING STARTED

Powering ON/OFF

1. When you first connect the unit to the mains

socket, the unit will be in STANDBY mode

after showing “Welcome to Internet Radio

STARTING….” (F.1)(F.2)

2. Press the Standby button on the unit or

remote control to switch the unit on.

3. Press the Standby button on the unit or

remote control to switch the unit back to

standby on mode.

Welcome to

Internet Radio

STARTING

(F.1)

00/00/000

00 : 00

(F.2)

GB-7

Selecting Modes

Press the MODE button repeatedly on the unit or remote control to switch

between Music player, DAB radio, FM radio, AUX In and Internet radio modes.

Adjusting the Volume

- Turn the VOLUME dial on the unit or press the VOL +/– buttons on the

remote control to adjust the volume.

- If you wish to turn the sound off, press the MUTE button on the remote

control. Press the MUTE button again or press the VOL +/– buttons on the

remote control or turn the VOLUME dial to resume normal listening.

Navigating the Menu

1. Press the MENU button on the unit or press the MENU button on the

remote control to access the menu.

2. Turn the Volume dial on the unit or press the / buttons on the remote to

select your choice.

3. Press the SELECT/SNOOZE button on the unit or press the SELECT button

on the remote control to confirm your selection.

When the unit is idle for approximately 15 minutes, it will automatically

switch to standby.

To switch the unit off completely, remove the mains plug from the

main socket.

Please turn the unit off completely to save energy when not in use.

This instruction manual explains the basic instruction for operating

this unit. Unless otherwise stated, all operations described are based

on remote control use.

GB-8

System Settings

Press the MENU button to display the menu, press the / buttons to select

Main menu and then press the SELECT button to confirm. Press the /

buttons to select System settings and then press the SELECT button to

confirm.

Equaliser

This system supports a variety of equalizers and sound effects.

- Press the EQ button to access Equaliser menu

Alternatively,

- During System settings mode, press the / buttons to select Equaliser

and then press the SELECT button to confirm.

1. The display will show : FLAT > CLASSIC > ROCK > POP > JAZZ

2. Press the / buttons to select and then press the SELECT button to

confirm.

Network

1. During System Settings mode, press the / buttons to select Network

and press the SELECT button to confirm.

2. Press the / buttons to select from the following settings, and then press

the SELECT button to confirm.

Network wizard SSID – select the desire wireless network.

Rescan – Scan for available networks.

Wired – select wired network.

Manual config – select wired/wireless network with

DHCP enable/disable.

PBC Wlan setup Select PBC on the unit and press the PBC button on the

modem device that you wish to connect with. Press the

SELECT button to continue.

View settings Display the setting on the unit.

Wlan region Select a country of your choice.

Manual settings Select wired/wireless network with DHCP enable/

disable.

NetRemote

PIN Setup

To define a PIN number to be entered before being able

to connect to the unit

remotely over a network

GB-9

Network profile View the connected network.

Clear network

settings

To delete the connected network memory in Network

profile.

Keep network

connected

To define whether remains connected to its network in

Standby mode and when not in Network radio mode.

This is necessary for remote operation and audio

streaming in Music Player mode.

3. Press the BACK button on the unit or on the remote control to cancel the

setting and return back to the previous menu.

Time/Date

The Time/Date can be automatically set once it has been connected to the

Internet, DAB+ or FM radio station with time/date information. You may also

adjust the Time/Date manually

- During System settings mode, press the / buttons to select Time/Date

and press the SELECT button to confirm. Press the / buttons to select

Set Time/Date and press the SELECT button to confirm.

1. The date digits will flash on the display.

2. Press the / buttons to adjust the day and then press the SELECT button

to confirm.

3. Repeat above Step (2) to set the Month/Year/Hour/Minute.

4. The date and time settings are now complete.

For the other settings under Time/Date, press the / buttons to select from

the following options and then press the SELECT button to confirm.

Auto update Update from DAB / FM / Network.

Set format 12 / 24 hour format.

Set timezone Select a time zone. (Only available when Auto update

from Network is on.)

Daylight savings Select daylight savings. (Only available when Auto

update from Network is on.)

The default auto time update setting is“Update from Network”. If you

would like to manually set the time, it is recommended to turn the

Auto update function off.

Andere Handbücher für IR-110

Inhaltsverzeichnis

Andere Denver Radio Handbücher

Denver

Denver SCR-2010 Bedienungsanleitung

Denver

Denver IR-140 Bedienungsanleitung

Denver

Denver MIR-260 Bedienungsanleitung

Denver

Denver MIR-260 Bedienungsanleitung

Denver

Denver DAB-38 Bedienungsanleitung

Denver

Denver MCI-100 Bedienungsanleitung

Denver

Denver DAB-60LW Bedienungsanleitung

Denver

Denver TWR-818 Bedienungsanleitung

Denver

Denver TR-53 Bedienungsanleitung

Denver

Denver DAB-24 Bedienungsanleitung

Denver

Denver CAD-438BT Bedienungsanleitung

Denver

Denver DAB-35 Bedienungsanleitung

Denver

Denver WRB-50 Bedienungsanleitung

Denver

Denver DAB-23 Bedienungsanleitung

Denver

Denver TR-54 Bedienungsanleitung

Denver

Denver DAB-24 Bedienungsanleitung

Denver

Denver DAB-33 Bedienungsanleitung

Denver

Denver MIR-270 Bedienungsanleitung

Denver

Denver DAB-32 SILVER Bedienungsanleitung

Denver

Denver DAB-33 Bedienungsanleitung

Denver

Denver DAB-43 PLUS Bedienungsanleitung

Denver

Denver DAB-22 Bedienungsanleitung

Denver

Denver DAB-35 Bedienungsanleitung

Denver

Denver IR-100 Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

auna multimedia

auna multimedia Yellowstone 10026851 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung