Denver MRD-51 Bedienungsanleitung
USER MANUAL
MRD-51
WWW.DENVER-ELECTRONICS.COM
Please read this user manual carefully before start using the product.
CLEANING THE CABINET
If the wooden cabinet becomes dusty please wipe it with a soft, non-abrasive dust cloth. Also
don’t use water or spray cleaners as this can damage the cabinet and the plastic/metal parts
of the unit.
TECHNICAL SPECIFICATION
Turntable speed 33/45/78 RPM (Disc size 17.5/25/30cm)
CD can play CD/CD-R/CD-RW/MP3
USB can play MP3
Cassette C60 & C90 (C120 cassette is not recommended)
Output power 2x2.5W
PREPARATION FOR USE
IMPORTANT: RAISING AN LOWERING THE TURNTABLE LID
To open the lid. Raise it as far as it can go until the lid support bracket locks in the position.
To close the lid. Pull forward the lid support bracket to release and then gently lower the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED. ALWAYS RAISE THE LID
TO RELEASE THE LID SUPPORT BRACKET.
LOCATIIONS OF CONTROLS AND INDICATORS
LOCATION OF CONTROLS
1. DUST COVER
2. COVER MECHANISM
3. TURNTABLE
4. SPEAKERS
5. TAPE STOP/EJECT BUTTON
6. CASSETTE MECHANISM
7. USB SOCKET
8. AUX-IN
9. 3.5mm HEADPHONE JACK
10. FUNCTION BUTTON (DAB/FM/CD/USB/PHONO/TAPE/AUX)
11. REMOTE SENSOR
12. CD DOOR
13. PLAR/PAUSE
14. STOP BUTTON
15. DN/F-R
16. UP/F-F
17. REC/DEL (RECORD BUTTON/DELETE BUTTON)
18. CD DOOR OPEN/CLOSE BUTTON
19. VOLUME KNOB/ POWER STANBY
20. POWER LED
21. DAB MENU BUTTON
22. DAB INFO BUTTON
23. DAB SCAN BUTTON
24. DAB PRESET BUTTON
25. DAB ENTER
26. LCM DISPLAY
27. TUNING BOTTON/PLAY.MODE
28. FM/DAB ANTENNA
29. AC CORD
30. ON/OFF SWITCH
31. ADAPTOR
32. TURNTABLE PAUSE SWITCH
33. PICK-UP HOLDER
34. Auto-stop ON/OFF
35. 33/45/78 RPM SPEED SELECTOR
36. TONE ARM
37. TURNTABLE
38. LINE OUT
REMOTE CONTROL
1. POWER ON/OFF
2. CD DOOR OPEN/CLOSE BUTTON
3. RECORD BUTTON
4. DELETE BUTTON5. MODE BUTTON
6. STOP BUTTON
7. REPEAT BUTTON/VOL+
8. PROGRAM BUTTON/VOL-
9. PLAY/PAUSE BUTTON
10. DAB SCAN BUTTON
11. INFO
12. SKIP-BUTTON/FAST FORWARD BUTTON
13. SKIP+ BUTTON/REWIND BUTTON
14. NUMERIC KEYBOARD
15. +10
16. ENTER
17. MENU
18. EQ
19. PRESET
20. TIMER
REMOTE BATTERY INSTALLATION
The infrared remote control requires 2 PCS UM-4 R03, AAA (3V) Battery
POWER ON/OFF
1. Press POWER to turn the system on. The power indicator lights up.
2. Press the function selector buttons (DAB/FM/CD/USB/TAPE/PHONO/AUX IN) to select the desired
function.
3. Start to adjust the volume by using the volume control button.
4. When finished listening press POWER again to turn off the system. The power indicator goes off.
Remark The unit is comply with ERP2, the unit will turn to Standby mode if there is no operation on the
unit after 15 mins, please press POWER button 2 times if you want to re-start the unit.
DAB MODE
Press function button (10) (5 on remote) repeatedly to select DAB mode. Press SKIP+/- (16/15) (12/13 on
remote) to search the program
DAB MENU
Press MENU (21) (17 on remote) to access to the options.
1. Full Scan select this option to perform a full scan of the available DAB programs. You can press SCAN (23)
to perform the same action.
2. Manual Tune select this option to select manually the DAB frequency
3. DRC select this option to choose between DRC low, DRC high and DRC off.
4. Prune select this option to choose between PRUNE stations on or off.
DAB PRESET
You can program a maximum of 20 preset radio stations.
1. Press and hold PRESET (24) (19 on remote). PRESET STORE will appear on display. Press SKIP+/- (16/15)
(12/13 on remote) to select the preset number. Press ENTER (9) (16 on remote) to confirm.
2. Press PRESET (24) (19 on remote) to navigate through the presets.
DAB INFO
Repeatedly press INFO (22) (18 on remote) to see the following information NAME/KBPS/DATE /TIME.
FM MODE
Press function button (10) (5 on remote) repeatedly to select FM mode. Turn the TUNING KNOB (27) to
manually select the frequency
FM MENU
Press MENU (21) (17 on remote) to access to the options.
1. Scan Setting select this option to choose between scanning all stations or only the strong stations.
2. Audio Setting select this option to choose between forcing mono audio or allowing stereo Sound.
FM PRESET
See DAB PRESET instructions.
FM INFO
Repeatedly press INFO (22) (18 on remote) to see the following informations KIND OF PRO-
GRAM/FREQUENCE/AUDIO/DATE/TIME.
CD OPERATION
1. Press the CD/USB button to enter CD mode, the “---“ and ‘DISC’ icon will be shown on the
screen. The unit can play CD, CD-R and CD-RW.
2. Press the OP/CL button top open the CD drawer.
3. Place your disc in the CD drawer with the label side facing up.
4. Press the OP/CL button again to close the CD drawer. Playback will automatically start from
the first track.
5. MP3 icon will be shown if MP3 file is detected in the disc.
PLAYING CASSETTE
Note Before inserting the tape in the player be sure that there is no excess slack in the cassette that could
jam the mechanism.
1. Press POWER to turn the system on.
2. Press TAPE button to enter TAPE mode.
3. Insert your cassette into the slot located on the right side of the cabinet, as shown in the
illustration, with the side you wish to play facing up and the open end on the right side.
4. Cassette playback begins as soon as the tape is inserted. Adjust the VOLUME control to the
desired level.
5. To advance the tape rapidly, depress the button approximately half way. The tape will
move forward rapidly as long as the button is depressed. Normal playback will resume when
the button is released
6. When the tape ends, the player stops automatically. Depress the button completely to
remove the tape from the player. You may depress button to stop playing the tape at any
time.
7. Press POWER again to turn the system off.
PLAYING VINYLS RECORDS
The system includes a full-size, 3 speed, belt-drive turntable. You can play 33, 45 and 78rpm records.
1. Press POWER to turn the system on.
2. Press the PHONO button to enter the PHONO mode.
3. Make sure you have removed the stylus cover from the stylus and have released the
tone arm lock
that
4. secured the tone arm to the tone arm rest.
5. Set the turntable speed selector to appropriate speed 33, 45 or 78rpm. If you are
playing 45 rpm singles, place the 45rpm adapter on the centre spindle.
6. Place your record on the the centre spindle.
7. Raise the cue lever to lift the tone arm of its rest. Move the tone arm to the edge of
the record. The turntable starts automatically. Use the cue lever to gently lower the
tone arm onto the record.
8. Adjust the volume control to the desired level.
9. When the tone arm reaches the end of the record it automatically returns to the tone
arm rest and the record player stops.
10. Press POWER again to turn the system off. The POWER indicator goes OFF.
Note Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the
tone arm clamp could result in damage to the tone arm.
AUX IN OPERATION
Connect the audio system into the AUX IN jack on the rear panel, Press the PHONO/AUX IN button. Start
playing from the connected device.
USB OPERATION
1. Press the CD/USB button first and the FUNCTION button to enter USB mode. The ‘---‘
and USB icon will be shown.
2. Insert a USB flash device into the USB socket.
3. PLAY/PAUSE, DN/UP and stop functions are the same as CD functions.
Note You may press the FUNCTION on the panel or long press PLAY/PAUSE button on the remote control
for 2 seconds to change the playing mode between CD and USB.
PLAYING IN MP MODE (CD/USB)
1. Press PLAY/PAUSE button to start or pause playback selected track.
2. While playing the song, the song number and folder number of the selected track will
be shown in the display.
3. You can stop the playback at any time by pressing the STOP button.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD/USB MODE
During CD/USB playback press UP/F.F ( ) or DN/F.R ( ) button on the unit front panel or on
the remote control repeatedly to change track. To rapidly search forward or backwards within a track press
and hold UP/F.F (press UP/F.F ( ) or DN/F.R ( ) button. To skip 10 tracks back or forth then press
TRACK-10 or TRACK+10 on the remote control.
USB RECORDING
1. CD recording
Insert USB flash drive into the USB socket. Then press CD/USB button. Place CD into the CD drawer and
play the track which will be recorded. Press RECORD button twice to start recording. If all CD is played,
Then all tracks will be recorded. NOTE Recording will fail if pressing STOP button during recording
2. MP3 DISC recording
Insert USB flash drive into the USB socket. Then press CD/USB button. Place CD with MP3 files into the CD
drawer and play the MP3 track which will be recorded. Press RECORD button twice to start recording. If all
MP3 files is played, Then all tracks will be recorded. NOTE Recording will fail if pressing STOP button
during recording
3. Cassette recording
Insert USB flash drive into the USB socket. Then press TAPE button. Place the cassette into the socket. Play
cassette. Press RECORD button twice to start recording. Press STOP button to stop recording.
4. Vinyl recording
Insert USB flash drive into the USB socket. Then press PHONO/AUX IN button. Play the vinyl and press
RECORD button twice to start recording. Press STOP button to stop recording.
5. AUX IN recording
Insert USB flash drive into the USB socket. Connect the external audio device into the AUX jack on the rear
panel. Then press PHONO/AUX IN button and play audio and press RECORD button twice to start
recording.
DELETE TRACKS FROM USB DISC
Press CD/USB button on the front panel or long press PLAY/PAUSE on remote control to select USB mode.
Select the track and press delete for 2 seconds and the track is deleted.
Inhaltsverzeichnis
Andere Denver Stereoanlage Handbücher
Denver
Denver MCB-700 Bedienungsanleitung
Denver
Denver MC-7100S Bedienungsanleitung
Denver
Denver MRP-161 Bedienungsanleitung
Denver
Denver MCI-102 Bedienungsanleitung
Denver
Denver MDA-260 Bedienungsanleitung
Denver
Denver MCA-160 Bedienungsanleitung
Denver
Denver MCA - 150 Bedienungsanleitung
Denver
Denver MMP-355 Bedienungsanleitung
Denver
Denver MC-5400 Bedienungsanleitung
Denver
Denver MCU-5301 Bedienungsanleitung
Denver
Denver MC-5230DAB+ Bedienungsanleitung
Denver
Denver MCD-63 Bedienungsanleitung
Denver
Denver MCU-5501 Bedienungsanleitung
Denver
Denver MCA-220DAB+ Bedienungsanleitung
Denver
Denver MCD-30 Bedienungsanleitung
Denver
Denver MCA-171 Bedienungsanleitung
Denver
Denver MRP-141 Bedienungsanleitung
Denver
Denver MMP-390 Bedienungsanleitung
Denver
Denver MCA-210 Benutzerhandbuch
Denver
Denver MMP 351 Bedienungsanleitung
