Denver DFT-1506 DVBT AC/DC Bedienungsanleitung

15.4 TFT LCD TV+DVBT"Operating

Instructions

DFT-1506 DVBT AC/DC

TABLE OF CONTENTS

MENU Screens

11-12

Rear view of TV set 6

Important Safety Instruction 3

Table of Contents 1

Specifications 2

Remote Control unit 7-10

Functional Parts(TV) 5

The Causes of interference

Installation

Troubleshooting Tips

DVBT setup menu setting 13-16

SPECIFICATIONS

Note:Design and specifications are subject to change without prior notice.

Receiving System:

Colour System:

LCD Panel:

Ext.Antenna:

Ext. In/Out:

Speaker:

Audio Output:

Power Consumption:

75 Ohm Coaxial Cable

PC Input, SCART IN

8 Ohm x 2

AC 110-240V 50/60Hz,50W

Dimension:

Net Weight:

PAL/SECAM

B/G,D/K, I

W381.6 xD158 xH329.2(mm)

1.95KG

391mm(15.4inch) diagonal

CAUTION

Never tamper withany components insideyour set, orany other adjustmentcontrols not mentionedin

this manual. The LCD panel used in this product is made of glass. Therefore,it can break When the

product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case

the LCD panel breaks.When you clean up dust or stick of a water drop on the LCD panel. The power

cord should be pulled out from the plug receptacle, then wipe the receiver with dried soft cloth

.During thunder and lighting ,unplug the power cord and antenna cord to prevent your TV set from

damage. All television receivers are high voltage instruments. All "inside work"on your receiver should

be performed only by the TV service personnel.

If some abnormalphenomena happens ,may be you have some mis-opertion,please take off power and

restart your TVset .

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS,

SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

The lighting flash with arrow head within a triangle is intended to tell the user that

parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important

operating and servicing instructions are in the papers with the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTION

the power disconnectdevice/plug SHALL/MUST remainreadily operable/easy todisconnect,if anyurgent

need.

¼ò ½é¼ò ½é

Requires two AAA batteries(supplied).

Procedure

1. Turn the remote control face down. Remove batterycover by pressing down on the marking on the

cover and sliding it off in the direction indicated.

2. Install batteries matching(+) and(-) polarity signs.

3. Replace the battery cover by sliding in reverse until the lock snaps.

Note: Incorrect installation can cause battery leakage and corrosion that will damage the Remote

control.

Precautions

Replace batteries in pair.Do not mix battery types(zinc carbon with alkaline).

Do not mix battery types(zinc carbon with alkaline).

Do not recharge, heat, short-circuit, disassemble, or burn batteries.

INSTALLATION

Please note,12V car adaptor is included for this unit.

FUNCTIONAL PARTS(TV)

Front View ofLCD Set

To turn theTV power ON

Put the TVset on thecorrect place, thenconnect the DC plug of the AC-DC adaptor to the DC 12V socket

at the backof the TVset. Connect theadaptor main cord to the wall outlet ,then the LED indicator lamp

turns red/blue andthe TV setis at Standby/work Mode. At Standby Mode, if Standby Button is pressed

the power indicatorwill change toblue. It takes a few seconds before the picture appears.

To turn theTV power OFF

Press the StandbyButton to makethe TV setin Standby Mode, then disconnect the power plug from the

wall outlet.

NOTE

If TV isthe selected inputwithout signal received and NO operation is performed for about 5 minutes

continuously, the TVset will enterstandby mode. For any inputs other than TV, the TV set will not enter

standby mode automaticallywithout users instruction.If you are not going to use this TV set for a long

time, switch offthe set anddisconnect the power plug from the wall outlet.

1. Standby Button

2. TV/DVBT

8. Remote Sensor

9. LED indicator lamp

MENU Button

4. P+ Button

5. P- Button

6. V+Button

7. V- Button

Button

6 5 4 3 1

V- V+ P- P+ MENU TV/DVBT STANDBY

REAR VIEW OF TV SET

DC IN 12V

HEADPHONE

PC IN

FULL-SCART

NOTE

Precautions when connecting to other equipment

When using external equipment with this TV set, please read the instruction manual of the external equipment.

Switch off all power supplies to the equipment and TV set before connection.

Always ensure that the input and output terminals are correctly connected.

TO DC IN 12V

TO POWER SOURCE

RF INPUT(ANT.)

Full-SCART

VGA

AUDIO

ANT.

PCIN

DC IN 12V

REMOTE CONTROL UNIT

POWER ON/STANDBY button

Press this button to switch on the TV when at standby

mode or enter standby mode.

MUTE button

Press this button to mute or restore sound.

P.P Button

Press this button to select the desired picture mode:

NORMAL/SOFT/RICH/CUSTOM.

DISPLAY Button

Press this button to display the setting on the screen.

TIMER Button

Press this button to set the sleep timer, the order

shown below(minutes):

0 - 15 - 30 - 45 - 6 0

When the preset length of time has passed, the TV set

enters standby mode.

TV/DVBT Button

Press this button,there will be some word show

on the right top of the screen, press ¡°P+/-¡± to select

the AV source, and then press ¡°V+/-¡±to enter AV

mode.

DIGIT Button(0-9)

This TV allows you to select channels from 0 to 255.

Press this button to select one-digit,two digit or three

-digital channels input options.

To select a one-digit channel(e.g. Channel 8),press

this ¡°-/--¡±button to change channelselection to ¡°-¡±

on screen display and press the ¡°8¡±button only.

To select a two-digit channel(e.g. Channel 28),press

this ¡°-/--¡±button to change channelselection to ¡°--¡±

on screen display and press¡°2¡± and ¡°8 ¡± buttons.

To select a three-digit channel(e.g. Channel 128),

press this¡°-/--¡±button to change channelselection

to ¡°---¡± on screen display andpress¡°1¡±,¡°2¡±and

¡°8¡± buttons.

SCART

DVBT

POWER

P.PP.P

SWAPSWAP

VIEW

MUTE TV/DVBT

PROG+

PROG-

VOL+

VOL-

REVEAL SIZE

INDEX TEXT

MIX

ENTER

-/---/--

SUB.PAGE

EPG FAV

STOP

LANG

FORMAT SUBTITLE INFO RECALL

EXIT DVB-MENU TEXT

RADIO

PAGE PAGE

PAUSE

AUDIO

REMOTE CONTROL UNIT

FROM CH 0

TO CH 7

SAVE

MENU Button

Press this button to enter the menu screens for

various optional adjustable settings.

PROG+/-- Button

Press the program up button to select the program

forwards. Press the program Down button to select

the program Backwards.

VOL+/- Button

Press volume up/down buttons to adjust sound level.

Q.VIEW Button

Press this button to return to the previously viewed

program.

SWAP Button

You can adjust your TV program list order, press this

button, the program swap menu will displayed, as

shown below. E.g. to swap channel 0 and 7 , press

¡°SWAP¡± button, press¡°PROG+/--¡± to choose

FROM and press ¡°VOL+/-¡± to set the channel

number as¡°0¡±,and as the same way to set the TO

as¡°7¡±,last to do choose the¡°SAVE¡± and press

¡°VOL+/-¡± to implement this fuction.

POWER

P.PP.P

SWAPSWAP

VIEW

MUTE TV/DVBT

PROG+

PROG-

VOL+

VOL-

REVEAL SIZE

INDEX TEXT

MIX

ENTER

-/---/--

SUB.PAGE

EPG FAV

STOP

LANG

FORMAT SUBTITLE INFO RECALL

EXIT DVB-MENU TEXT

RADIO

PAGE PAGE

PAUSE

AUDIO

Inhaltsverzeichnis

Andere Denver TV-DVD-Kombination Handbücher

Denver

Denver TVD-2102 Bedienungsanleitung

Denver

Denver TVD-1458 Bedienungsanleitung

Denver

Denver TFD-2627MC Bedienungsanleitung

Denver

Denver LDD-2260MC Bedienungsanleitung

Denver

Denver TFD-2201DVBT Bedienungsanleitung

Denver

Denver TVD-2104 Bedienungsanleitung

Denver

Denver TFD-2005DVBT Bedienungsanleitung

Denver

Denver TFD-3250DVBT Bedienungsanleitung

Denver

Denver TFD-1914DVBT CU Bedienungsanleitung

Denver

Denver TFD-2213 Bedienungsanleitung

Denver

Denver TVD-1413 Bedienungsanleitung

Denver

Denver DV3 T TFD-1020DVBT Bedienungsanleitung

Denver

Denver TFD-1905 Bedienungsanleitung

Denver

Denver TVD-1418 Bedienungsanleitung

Denver

Denver TFD-1545 Bedienungsanleitung

Denver

Denver TFD-1906 Bedienungsanleitung

Denver

Denver LED-2251DVBT Bedienungsanleitung

Denver

Denver TFD-2010 Bedienungsanleitung

Denver

Denver TVD-1448 Bedienungsanleitung

Denver

Denver TFD-1912DVBT Bedienungsanleitung

Denver

Denver TVD-1403 AC/DC Bedienungsanleitung

Denver

Denver TVD-1403 AC/DC Bedienungsanleitung

Denver

Denver TVD-2114 Bedienungsanleitung

Denver

Denver TFD-1904DVBT Bedienungsanleitung

Beliebte TV-DVD-Kombination Handbücher anderer Marken

Memorex

Memorex MVDT2002SM Bedienungsanleitung

Akai

Akai ALED2609TWE Bedienungsanleitung

JVC

JVC LT-32D210 Bedienungsanleitung

Toshiba

Toshiba VTD1432 Bedienungsanleitung

Haier

Haier DTA-2189 Bedienungsanleitung

Philips

Philips DVD 580M Handbuch

RCA

RCA RLEDV2238A-B Bedienungsanleitung

LENCO

LENCO DVT-1933 Bedienungsanleitung

LG KU-17WDVD Bedienungsanleitung

Sylvania

Sylvania SKCR2706BT Bedienungsanleitung

Memorex

Memorex MVDT2002A Bedienungsanleitung

Akura

Akura AXDVD1515W-ID Bedienungsanleitung

Wintal

Wintal 27LDVD05 Bedienungsanleitung

Toshiba

Toshiba 23HLV84 Bedienungsanleitung

AOC

AOC LC19W060C Bedienungsanleitung

iLive

iLive ITDE2288 Bedienungsanleitung

Magnavox

Magnavox CD130MW9 Bedienungsanleitung

Kogan

Kogan KALED16DVDYA Bedienungsanleitung