10
4.2 The introduction of the buttons
START
|
REPORT
Press this button to select the User 1.
Press this button to save and exit the setting.
In the MENU interface, press this button to conrm.
Press this button to move to the next selection.
REPORT
Press this button to enter into the report interface. (the
rst press is to check the total report, the second press
is to check the detailed report).
PRINT Press this button to print out the current report.
MENU Press this button to enter into the MENU Interface.
ADD Press this button to turn on/off the accumulation function.
When do some setting, press this button to increase “1”.
BATCH
Press this button can turn on/off the batch function, and if press
again, the user can select the batching number among “100, 50,
20, 10, off”.
If the batching number area shows “---”, which means the batch
function is“off”.
When do some setting, press this button to decrease “1”.
+1/+10
In the batching mode, short press this button is to increase “1”;
if long press this button is to increase“10”.
In the MENU interface press this button to return to the
previous interface.
CUR
Press this button to select different currency.
In the Menu Interface, press this button to select the next choice.
When do some setting, press this button to increase “1”.
FACE Press this button to active FACE function.
When do some setting, press this button to decrease “1”.
ORIENT
Press this button to active ORIENT function.
In the MENU interface press this button to return to the pre-
vious interface.
START
||
ENTER
Press this button to select the User 2
Press this button to save and exit the setting.
In the MENU interface, press this button to conrm.
Press this button to move to the next selection.
MODE
In the Main screen, press this button to select the counting
mode. There are ve counting modes: COUNT, FACE, ORIENT,
SINGLE, MIX.
REJECT Press this button to check the information of the suspicious notes.
