Detecto 495 Bedienungsanleitung

Back of beam

B1

A1

A3

1/4-20 Screws (4)

A2

C

B

A

Set-Up Procedure

for

Low-Profile Wheelchair Scale

Beam Type

Model 495/4951

1. Remove all packing materials.

2. Set scale base on a flat, level surface. Slide ramp pins into T-slots on base;

drop pins into the grooves.

3. Remove 4 (1/4-20) screws from the column bracket (A1). Set aside

(to be used on steps 4 and 5).

4. Set column and beam assembly (B) on column bracket

(A1). Be sure the back of the beam is facing the scale

deck (A). Secure column and beam assembly with

4 (1/4-20)screws. Do not tighten the screws.

5. To attach handrail (C), remove 2 (3/8-16) screws from the top

of weighbridge side. Set the handrail on the weighbridge

side, align holes, reinstall 2 (3/8-16) screws and tighten.

6. If available, place the scale on a table or workbench, otherwise place the scale on floor.

In either case, DO NOT tilt or place scale on it’s side. Next, push bottom of the hanger (B1)

back towards the scale weighbridge (A), lift long lever and the nose iron (A2) up, slide the

hanger (B1) under the nose iron pivot (A3). After the hanger is attached, tighten the 4 (1/4-20)

screws. The scale assembly is now complete.

7. Move upper and lower poise of the beam to “0” zero position.

8. Beam should balance so that the tip end of the beam is centered in a trig loop. If the beam is

not centered, adjust the zero balance screw to the right or left until the beam is in a balanced

position.

9. If the beam does not come to a balanced position, check all mechanical connections in the

scale base assembly and the column and beam assembly. Repeat step 7. The scale should

now be ready for operation.

Back of Beam

Set Upper and Lower Poise

to “0” Position

Zero Balance Screw

Trig Loop

Lift Long Lever

Hanger

B1

A3

A2

T

D

E

T

C

O

E

A Division of Cardinal Scale Manufacturing Co.

P.O. Box 151, Webb City, MO 64870 USA

Ph: 417-673-4631 or 1-800-641-2008 Fax: 417-673-5001

e-mail: [email protected]

Visit our Web site at www.detecto.com

®

0066-M188-01 Rev E

09/05

Printed in USA

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Detecto Skala Handbücher

Detecto

Detecto 6100 Series Bedienungsanleitung

Detecto

Detecto WeighRite W200 Series Bedienungsanleitung

Detecto

Detecto P220 Bedienungsanleitung

Detecto

Detecto 6500 Bedienungsanleitung

Detecto

Detecto GP-400-758C Referenzhandbuch

Detecto

Detecto APEX Series Bedienungsanleitung

Detecto

Detecto 4500 Series Bedienungsanleitung

Detecto

Detecto D110 Bedienungsanleitung

Detecto

Detecto D118 Bedienungsanleitung

Detecto

Detecto MB130 Bedienungsanleitung

Detecto

Detecto D228 Bedienungsanleitung

Detecto

Detecto 6029 Bedienungsanleitung

Detecto

Detecto 8440 Bedienungsanleitung

Detecto

Detecto solo Series Bedienungsanleitung

Detecto

Detecto SlimPRO Bedienungsanleitung

Detecto

Detecto 6855 Bedienungsanleitung

Detecto

Detecto FHD-133 Bedienungsanleitung

Detecto

Detecto AP-10 Referenzhandbuch

Detecto

Detecto DR400C Bedienungsanleitung

Detecto

Detecto 6570 Bedienungsanleitung

Detecto

Detecto 750 Bedienungsanleitung

Detecto

Detecto 6439 Bedienungsanleitung

Detecto

Detecto AP-10 Bedienungsanleitung

Detecto

Detecto 7550 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung