devolo BPL Modem MV
5
This manual describes the properties,handling and basic installation steps. Carefully read all in-
structions before initial use of the device and store the manual for later reference.
Icons
This section contains a brief description of the icons used in this manual.
Very important note. Failure to observe this note may result in damage.
Important note that should be observed.
1 Intended use
Ensure that the BPL Modem MV is used according to its intended use in order to prevent damage
to this or other devices:
The intended use of the BPL Modem MV is the implementation of a PLC network of SMART GRID
devices in the medium-voltage grid in combination with inductive or capacitive medium-voltage sig-
nal couplers.
The BPL Modem MV is intended for installation on the DIN rail. The device is intended for blackout-
safe operation using a (network buffered) 24V DC nominal accumulator.
1.1 CE conformity
The product conforms to the requirements from the directives
쎲2014/35/EU
The product is intended for operation in the EU, Switzerland and Norway.
This product is a Class A device.
쎲RoHS 2011/65/EU
쎲ErP 2009/125/EC and the other relevant provisions of the Radio and Telecommunications Ter-
minal Equipment Act (FTEG).
You can find the CE declaration for the product online at www.devolo.com/smart.
1.2 Disposal of old devices
The WEEE Directive 2012/19/EU is used to prevent the occurrence of waste electrical and
electronic equipment and to reduce this type of waste through reuse, recycling and other
forms of utilisation. It establishes minimum standards for handling waste electrical and
electronic equipment in the EU.
