DeWalt D21110 Bedienungsanleitung

D21110

ENGLISH

ROTARY DRILL

D21110

Congratulations!

You have chosen a DEWALT Power Tool. Years of

experience, thorough product development and

innovation make DEWALT one of the most reliable

partners for professional Power Tool users.

Technical data

D21110

022VegatloV

Power input -A9 W 600

No-load speed min

-1

0 - 2,600

Maximum drilling range in

steel/wood mm 13/25

Chuck spindle thread size UNF 1/2" x 20

Collar diameter mm 43

Maximum chuck capacity mm 13

8.1gkthgieW

Fuses:

220-240 V tools 10 Amperes, mains

The following symbols are used throughout this

manual:

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Denotes risk of electric shock.

IEC60745

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Be aware of the location of pipework

and wiring.

• Apply only a gentle pressure to the tool.

• Use auxiliary handles supplied with the

Excessive force does not speed up

tool. Loss of control can cause personal

injury.

drilling but decreases tool performance

and may shorten tool life.

Prior to operation:

• Insert the appropriate bit.

• Mark the spot where the hole is to be drilled.

Switching on and off (fig. A)

• To run the tool, press the variable speed switch (1).

The pressure exerted on the variable speed switch

determines the tool speed.

Chuck removal (fig. B)

• Open the chuck jaws as far as possible.

Always wait until the motor has come to

a complete standstill before changing the

direction of rotation.

• Insert a screwdriver into the chuck and remove

the chuck retaining screw (8) by turning

clockwise.

• Tighten an Allen key into the chuck and strike it

with a hammer as shown.

Inserting and removing a bit (fig. A)

Keyed chuck

• Open the chuck by turning the sleeve (6)

counterclockwise and insert the bit shank.

• Put the chuck key (7) into each hole in the side

of the chuck and turn clockwise until tight.

• To remove the bit, proceed in reverse order.

Forward/reverse slider (fig. A)

• To select forward or reverse rotation, use the

forward/reverse-switch (3) (see arrow on tool).

ENGLISH

• If necessary, press the lock-on button (2) for

continuous operation and release the switch.

The lock-on button works only in full speed,

forward rotation.

Maintenance

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair

agent where it will be disposed of in an

environmentally safe way.

• To stop the tool, release the switch.

• To stop the tool in continuous operation, press

the switch briefly and release it. Always switch off

the tool when work is finished and before

unplugging.

Screwdriving

• Select forward or reverse rotation.

Consult your dealer for further information on the

appropriate accessories.

Andere Handbücher für D21110

Inhaltsverzeichnis

Andere DeWalt Bohren Handbücher

DeWalt

DeWalt DCD793 Bedienungsanleitung

DeWalt

DeWalt DWD525 Bedienungsanleitung

DeWalt

DeWalt DCH417 Bedienungsanleitung

DeWalt

DeWalt DWD025 Bedienungsanleitung

DeWalt

DeWalt DCD791D2 Bedienungsanleitung

DeWalt

DeWalt DWE5010 Bedienungsanleitung

DeWalt

DeWalt DW217 Bedienungsanleitung

DeWalt

DeWalt DW160V Bedienungsanleitung

DeWalt

DeWalt DWD110 Bedienungsanleitung

DeWalt

DeWalt D25330 Series Bedienungsanleitung

DeWalt

DeWalt DW516K Bedienungsanleitung

DeWalt

DeWalt DW050 Bedienungsanleitung

DeWalt

DeWalt D21710 Bedienungsanleitung

DeWalt

DeWalt DC733 Bedienungsanleitung

DeWalt

DeWalt DW130 Bedienungsanleitung

DeWalt

DeWalt XR Li-Ion DCD771 Bedienungsanleitung

DeWalt

DeWalt DCD925 Bedienungsanleitung

DeWalt

DeWalt XR Li-Ion DCD999 Bedienungsanleitung

DeWalt

DeWalt D25501K Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCD980 Bedienungsanleitung

DeWalt

DeWalt DW511 Bedienungsanleitung

DeWalt

DeWalt DW116 Bedienungsanleitung

DeWalt

DeWalt DCD730 Bedienungsanleitung

DeWalt

DeWalt DCD703 Bedienungsanleitung

Beliebte Bohren Handbücher anderer Marken

Makita

Makita BDF456 Bedienungsanleitung

Black & Decker

Black & Decker LDX220 Bedienungsanleitung

Hitachi

Hitachi DH 40MA Bedienungsanleitung

Challenge

Challenge JO Technisches Referenzhandbuch

Makita

Makita LXFD01 Bedienungsanleitung

Festool

Festool T18+3 Bedienungsanleitung

Milwaukee

Milwaukee M12 FPDX-202X Bedienungsanleitung

EINHELL

EINHELL TE-RH 32 E Bedienungsanleitung

Makita

Makita DHP484 Bedienungsanleitung

Makita

Makita FD05 Bedienungsanleitung

Bosch

Bosch PSB 530 RA Bedienungsanleitung

Maximum

Maximum 054-1359-4 Bedienungsanleitung

Makita

Makita HP332D Bedienungsanleitung

Raider

Raider RDP-HD31H Bedienungsanleitung

Bort

Bort BPM-1400x2 Bedienungsanleitung

Black & Decker

Black & Decker 7266 Bedienungsanleitung

KENT USA

KENT USA TRD1230 Bedienungsanleitung

Bosch

Bosch GSB 19-2 RE Bedienungsanleitung