Dewert okin RF404A Bedienungsanleitung

Issue Department：Bedding

Division

Date：

2022-01-12

System Instruction

Author：

Instruction of RF404A

Edition：

1.0

Page 1 of 5

1/ 5

Instruction of RF404A

Circle key

Pause key

Head up

Head down

Head massage

Tilt up

Tilt down

Lumbar down

Lumbar up

Foot down

Foot up

Flat

Record key

Zero G

Bed light

All massage

Foot massage

Issue Department：Bedding

Division

Date：

2022-01-12

System Instruction

Author：

Instruction of RF404A

Edition：

1.0

Page 2 of 5

2/ 5

Figure 1 button ofremote

1.1 Bed lamp 14

Click the bed lamp button to open or shut the light under the bed.

1.2 Rec 1

Click the Rec button for 5 seconds to set the circle.

1.3 Pause 2

Click the Pause button for pause the circle.

1.4 Circle 3

Click the Circle button for 5 seconds to start the circle.

1.5 LUMBAR UP 15

Press and hold LUMBAR UP button, Lumbar actuator moves out, stop when released.

1.6 LUMBAR DOWN 16

Press and hold LUMBAR DOWN button, Lumbar actuator moves in, stop when released.

1.7 Tilt UP 11

Press and hold Tilt UP button, Tilt actuator moves out, stop when released.

1.8 Tilt down 12

Press and hold Tilt down button, Tilt actuator moves in, stop when released.

Issue Department：Bedding

Division

Date：

2022-01-12

System Instruction

Author：

Instruction of RF404A

Edition：

1.0

Page 3 of 5

3/ 5

1.9 M1 19

Click the M1 button, the bed moves to M1 position, press and hold M1 button for 5s until

backlight flashes, the control set the current position as M1 position

1.10 M2 18

Click the M2 button, the bed moves to M2 position, press and hold M2 button for 5s until

backlight flashes, the control set the current position as M2 position

1.11 HEAD UP 7

Press and hold HEAD UP button, head actuator moves out, stop when released.

1.10 HEAD DOWN 8

Press and hold HEAD DOWN button, head actuator moves in, stop when released.

1.11 FOOT UP 9

Press and hold FOOT UP button,foot actuator moves out, stop when released.

1.12 FOOT DOWN 10

Press and hold FOOT DOWN button, foot actuator moves in, stop when released.

1.13 ZG 13

Click the ZG button, the bed moves to zeroG position, press and hold zeroG button for 5s,

until backlight flashes, the control set the current position as zeroG position

Issue Department：Bedding

Division

Date：

2022-01-12

System Instruction

Author：

Instruction of RF404A

Edition：

1.0

Page 4 of 5

4/ 5

1.14 HEAD MASSAGE 4

Click the HEAD MASSAGE button, head massage motor switches massage intensity, massage

intensityswitches among 0-1-2-3；

1.15 FOOT MASSAGE 6

Click the FOOT MASSAGE button, foot massage motor switches massage intensity, massage

intensityswitches among 0-1-2-3

1.16 ALL MASSAGE 5

Click the ALL MASSAGE button, head and foot massage motor switches massage intensity,

massage intensityswitches among 0-1-2-3

1.17 FLAT 17

Click the FLAT button, the bed goes flat.

FCC：

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

FCC Radiation Exposure Statement:

The device has been evaluated to meet general RF exposure requirment. The device can be used

in portable exposure condition without restriction.

Issue Department：Bedding

Division

Date：

2022-01-12

System Instruction

Author：

Instruction of RF404A

Edition：

1.0

Page 5 of 5

5/ 5

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected. —Consult the dealer or an experienced radio/TV technician for help.

ISED RSS Warning:

This device complies with Innovation,Science and Economic Development Canada licenceexempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de

licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

RF exposure warning:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled

environment.The device has been evaluated to meet general RF exposure requirement.

Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un

autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux

rf.

Inhaltsverzeichnis

Andere dewert okin Gleichstromantrieb Handbücher

dewert okin

dewert okin ECO BETADRIVE ECO Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung

dewert okin RF404A Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken