A go o is an etched disc of metal or coated glass which allows an image to
e projected from the Gecko onto a wall or similar surface.
Go os ecome very hot when they have een in a lantern for an extended
period of time, so it is important never to handle go os until they have had
sufficient time to cool.
IInnsseerrttiinngg aa MMeettaall GGoooo
The go o holder on the Gecko is designed to take metal go os on one side
and glass go os on the other. Please refer to the drawings (Figs 3 + 4) to
see which side is used for inserting the metal and glass go os taking spe-
cial note of retaining ta s on each holder.
Take the go o in one hand and rotate it so that when looking from the front
of the gecko, the go o is upside down and ack to front (Fig 3). This is
ecause the projector will invert the image when it is projected.
Lower the go o into the holder so that it is held on 3 sides y the ta s ent
outwards from the holder (it may e necessary to end these ta s slightly if
the go o will not fit snugly).
To remove the go o, gently slide the go o upwards and away from
the holder.
Gobos
4
2
CCaauuttiioonn
Allow go os to cool
efore removing
Slide out go o from
the retainer
Fig 3
