IntelliLEDTM Gateway
www.dialight.com 4
Introduction
What is a Dialight IntelliLEDTM Gateway?
The Dialight IntelliLEDTM Gateway is a standalone wireless controller, which
can be used to connect, configure and manage up to 120 connected
Dialight wireless nodes. These include light fixtures, occupancy and daylight
harvesting sensors. The Gateway offers quick set-up and commissioning
of your lighting system. The Graphical User Interface (GUI) on-board the
Gateway may be accessed via a direct Ethernet connection using a laptop
or over WiFi. When a Gateway is disconnected or powered off, the lighting
system will default to an Emergency 100% ON state.
Technical Specifications
Equipment not supplied:
Cat5 Ethernet cable (use port marked X2 only) and AC Power Cable
Certification
UL 916, CSA C22.2 No.205, FCC part 15, Canada IC, CE,
EN55032, EN 55016-2-1, EN 55016-2-3, EN 61000-3-2, EN 61000-
3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5
EN 61000-4-6, EN 61000-4-11, NEMA 4X, IP66
AC Operating Voltage 100-277 VAC, 50/60Hz
Operating Temperature -40oC to +65oC
Ethernet 10/100/Gb Ethernet
Dimensions (WxDxH) 13.09 x 15 x 21.214 | 323.5mm X 382mm X 538,84mm
Dialight Part # GAUW24AG
Ratings Install only dry locations, IP66
Quick Disconnect This device must be connected to a quick disconnect device, such
as a circuit breaker
