INTRODUCTION
Thank you for purchasing a DIAMAPRO SYSTEMS® product.
This manual provides information and procedures to safely operate and
maintain the DP-JSX-10. For your own safety and protection from injury,
carefully read, understand, and observe the safety instructions described
in this manual. Keep this manual or a copy of it with the machine. If you
lose this manual or need an additional copy, please contact DiamaPro
Systems®. This machine is designed and built with user safety in mind;
however, it can present hazards if improperly operated and serviced.
Please follow the operating instructions carefully. If there are any questions
regarding operating or servicing of this machine, please contact
DiamaPro Systems®.
Disclaimer: DiamaPro Systems® and its aliates take no responsibility
for any damage, injury or death resulting from the incorrect or unsafe use
of this product. Use of this product should be undertaken by competent
persons only. It is the operator’s responsibility to ensure that the following
safety procedures are followed. If you are unsure, do not operate this
product.
1.1 KNOW THE RULES & YOUR EQUIPMENT
Most Job sites have rules governing equipment use & maintenance.
Before starting at a new work location, check with the supervisor or
safety coordinator. Ask about any rules or regulations you need to
abide. OSHA enforces federal laws within the United States that apply
to the safe operation, application, & maintenance of equipment on job
sites. It is the employer’s responsibility to comply with these laws.
Do not operate this machine unless you have read the operations and
maintenance manual carefully. Read any additional instructions included
from other manufacturers and organizations and the Masonry and
Concrete Saw Manufacturers Institute. Learn the applications and limita-
tions as well as the specic potential hazards related to this tool.
1.2 RECEIVE PROPER TRAINING
Do not operate this machine unless you have received operational and
maintenance training from a DiamaPro Systems® representative or from
an authorized distributor for DiamaPro Systems®.
1.3 PROTECT YOUR FEET
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved foot protection.
1.4 PROTECT YOUR EYES
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved safety glasses.
1.5 PROTECT YOUR LUNGS
Breathable silica may be generated by use of this product. Silica can
cause severe and permanent lung damage, cancer, and other serious
diseases. Do not breathe the dust. Do not rely on your sight or smell to
determine if the dust is in the air. Silica may be in the air without a visible
dust cloud. If air monitoring equipment for silica is not provided by your
employer at your work site, you MUST wear appropriate respiratory
protection when using or servicing the machine. If dry cutting, be sure
to use a HEPA ltered dust collector. Consult your employer and OSHA
regarding the appropriate respiratory protection.
1.6 PROTECT YOUR HEARING
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved hearing protection.
1.7 DRESS PROPERLY
Do not wear loose clothing or jewelry that can be caught in moving parts.
Wear protective hair covering to contain long hair. Keep hair away from
1. SAFETY INSTRUCTIONS
motor air vent. Rubber gloves and non-skid footwear are recommended
when working outdoors.
1.8 AVOID A DANGEROUS ENVIRONMENT
Do not expose machine to rain. Do not use machine in wet conditions.
Keep work area well lit. When working at an elevated location, pay atten-
tion to articles and persons below.
1.9 BEWARE OF HIDDEN DANGERS IN CONCRETE
Rebar or utility lines may be buried in concrete. Disconnect the power to
any utility lines. If these items are to be missed, clearly mark the area. If
these items are to be cut, check the blade manufacturer’s guidelines on
material to be cut.
1.10 KEEP WORK AREA CLEAN. DO NOT RUN OVER
ANYTHING
Loose objects could be thrown from crack. Make sure area to be cut is
clear from people and any loose objects, nuts, bolts, etc. Never run over
any loose objects
1.11 KEEP CHILDREN AND VISITORS AWAY
Do not allow anyone to stand in line with the blade path. Do not let children
or visitors contact machine or extension cord. Keep children and visitors
away from the work area.
1.12 AVOID FLAMMABLE LIQUIDS OR GASES
Engines and diamond blades produce heat and sparks during operation.
Never use machines in dangerous sites containing ammable, combustible
or explosive materials such as lacquer, paint, benzene, thinner, gasoline,
gases, and adhesive agents.
1.13 AVOID CONTACT WITH HOT BLADE AND BLADE
GUARD
The blade and blade guard become hot during operation and remain hot
after stopping the engine. Do not touch the blade and blade guard without
proper hand protection.
1.14 KEEP FIRM GRIP ON MACHINE
During normal operation as instructed in Section 6.0, keep a rm hold on
the handle grips and maintain control of the machine until the blade
completely stops.
1.15 CHECK BLADE AND MACHINE ROTATION
DIRECTION
Never operate a blade in the wrong rotation direction. Check the machine
rotation direction and blade direction when mounting a blade.
1.16 CHECK BLADE MAXIMUM ALLOWABLE SPEED
Check the maximum operating speed of the machine and blade. Never use
a blade rated less than the machine’s maximum speed rating.
1.17 CHECK BLADE FOR CRACKS, DAMAGE, AND
MISALIGNMENT
Never use a cracked, damaged, or misaligned blade. After mounting blade,
rotate by hand to check for proper alignment.
1.18 CHECK DIAMOND BLADE FOR WARNINGS
Many diamond blades contain a chemical known to the state of California
to cause cancer and/or birth defects or other reproductive harm. Diamond
blades improperly used are dangerous. Comply with American National
Standards Institute Safety Code B71 and Occupational Safety & Health Act
covering SPEED, SAFETY GUARDS, FLANGES, MOUNTING PRO-
CEDURES, GENERAL OPERATING RULES, HANDLING, STORAGE&
INSPECTION AND GENERAL MACHINE CONDITIONS. Read Diamond
Blades Safety Manual before use.
