Diamond Digital DV42P2 Bedienungsanleitung
ENGLISH
High Definition 42" Plasma Display
USER'S MANUAL
Thank you for purchasing the High Definition Plasma Screen.Before using your
DV42P2, please read the "SAFETY PRECAUTIONS" section of this manual
carefully to learn how to operate the box properly.
Keep this manual in a safe place.
Notes on lnstallation
This product is marketed with the assumption that it is to be
installed by qualified personnel with relevant skills and
competence. It is recommended to consult with an installation
specialist or your dealer install and set up the product. We cannot
assume liabilities for damages caused by improper installation or
mounting, misuse, modifications or natural disasters.
D V 4 2 P 2
to
Colour Plasma Display Panel
User’s Manual
Content
Safety Precautions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１
Features and Functions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２
Preparation
Preparation ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３
Setup and Turn on Power ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４
Turn on the Plasma Display ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ５
Remote Control Setup．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ５
Front Panel Controls ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ６
Connection to other equipment
Input Connection of Video Signal （DVD/VCD/VCR） ．．．．．．．．．．．．．． ７
Input Connection of PC Signal （PC/DVI-D） ．．．．．．．．．．．．．．．．．．．．． ８
Output Connection of Video Signal ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ９
Operation
Operation of Remote Control ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １０
Menu Function ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １１
Main Menu．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １１
Picture Menu．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １２
Sound Menu ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １３
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
１４
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
１５
Setup Menu．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
１６
Timer Menu ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １７
Safety Notice ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １８
Specifications．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２０
Troubleshooting ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２１
Service Contacts ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２２
To obtain maximum benefit from your set, please read these Instructions
before making any adjustments, and retain them for future reference.
Display Menu
Layout Menu (MultiWindows)
Safety Precautions
WARNING
1) To prevent damage which may result in fire or shock hazard, do not
expose this appliance to rain or moisture.
Do not place containers with water (flower vase, cups, cosmetics, etc.)
above the set. ( including on shelves above, etc.)
2) To prevent electric shock, do not remove cover. No user serviceable parts
inside. Refer servicing to qualified service personnel.
3) Do not remove the earthing pin on the power plug. This apparatus is
equipped with a three pin earthing-type power plug. This plug will only fit an
earthing-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the earthing plug.
CAUTION
This appliance is intended for use in environments which are relatively free
of electromagnetic fields.
Using this appliance near sources of strong electromagnetic fields or where
electrical noise may overlap with the input signals could cause the picture
and sound to wobble or cause interference such as noise to appear.
To avoid the possibility of harm to this appliance, keep it away from sources
of strong electromagnetic fields.
Symptoms
After-images appear
Check
Do not allow a still picture to be displayed for
an extended period, as this can cause a
permanent after-image to remain on the
Plasma Display.
Examples of still pictures include logos, video
games, computer images, Teletext and images
displayed in 4:3 mode.
Note: Permanent after-image on the Plasma
Display resulting from fixed image use is not an
operating defect and as such is not covered by
the Warranty.
This product is not designed to display fixed
images for extended periods of time.
Welcome
1
Features and Functions
42 inch（107cm）Large Screen Flat Panel Plasma Display
Panel Resolution: XGA（1024 x 768 Pixels）
MAX Brightness of Panel: 1000 cd/m2
MAX Contrast Ratio of Panel: 3000:1
View Angle: Greater than 160°H&V
Dual Video, Dual S-Video, Single Y/Cb/Cr（480i, 576i）
Single Y Pb Pr （480P, 576P, 720P, 1080i, 1080P）HDTV Ready
Single Video, Audio（L/R）Output
PC D-SUB 15Pin Signal Receiver
DVI-D Signal（TMDS）Receiver, Support HDTV, SDTV
External 10W×2 Speaker
Intelligent Volume Control Function
PIP（Picture in Picture）
POP（Picture Out Picture, Split Plane）
High Effective 8 bits Digital Video Decoder
Digital 4H Comb Filter
3:2, 2:2 Pull Down
DLTI / DCTI Digital Brightness/ Chroma Adjust
Digital I / P Processor, Progressive Display
HDSPT（High Definition Scalar Processor Technology）
Timer to Turn ON / OFF TV Set
MTS, Stereo, Mono Sound, Surround Function
2
Preparation
1. Preparation
This picture is for reference only .
● Do not place the Plasma Display on sloped or unstable surfaces.
● Do not place any objects on top of the Plasma Display.
● This Plasma Display radiates infrared rays, therefore it may affect other infrared
communication equipment.
● Install your infrared sensor in a place away from direct or reflected light from your
Plasma Display.
● This Plasma Display is designed for use in standard atmosphere conditions under 2000m.
● Avoid installing this product near electronic equipment that is sensitive to
electromagnetic waves.
3
2. Setup and Turn on Power
This picture is for reference only.
Connect the AC cord plug to the Plasma Display Panel:
Connect the AC power cord plug to the ”AC IN” jack, Connect the other side
plug to the Wall Outlet. Press the Power switch“○”on the Plasma Display to turn
the set on.
View from back of the Panel
4
3. Turn on the Plasma Display Panel
When the Display is on, the Power Indicator LED will be lit as follows:
Power Indicator Green: Turned On
Power Indicator Red: Stand by
If the Power Indicator is red, press the “ ” key on the Front panel controls or the
“POWER” key on the Remote Control, to turn on the unit.
4. Remote Control Setup
① Slide off the battery cover
② Insert batteries
Note correct polarity (+and -).
③ Replace the cover
5. Front panel controls
• Make sure that the batteries are fitted the
correct way round.
• Do not mix different battery types or use
rechargeable batteries.
5
5. Front Panel Controls
①
IR: Remote Control Receiver
②
: Power Key. Press to toggle between Standby and On state.
③
Power Indicator:
Power Indicator: Green = Turned On
Power Indicator: Red = Standby mode
④
MODE: Signal Source selection.
Press repeatedly to select from the available Signal Inputs:
S-VIDEO2 →AV2 →YCbCr →D-SUB
AV1 ←S-VIDEO1 ←YPbPr ←DVI
⑤
MENU: Displays the On Screen Display to configure the Plasma Display.
●Press this key to open the Main Menu, press “- CH +” key select an item.
Press Volume Up (+) key “ VOL + ” to open a submenu.
●Press MENU key to return to main menu or exit menu.
⑥
- VOL +: Volume Down (-) / Up (+)
●Press - VOL + key to enter a menu or adjust a function.
⑦
- CH +: Programme Number Down (-) / Up (+)
●Press - CH + key to move up or down the list of menu items.
6
⑦
⑥
⑤
④
③
②
①
Connection to other equipment
Please connect this Plasma Display Panel to other equipment as pictured below.
You may connect several types of equipment eg: DVD, VCD, VCR,
Set Top Box, X-Box and so on.
Video Signal Input Connections (DVD/VCD/VCR)
There are 2 Video inputs and 2 S-VIDEO inputs.
Each video source has its own set of R/L audio inputs.
There are 2 Component inputs: Y Cb Cr and Y Pb Pr.
Each Component source has its own set of R/L audio inputs.
If your DVD or Set Top Box has Y Cb Cr or Y Pb Pr outputs,
connect it to the appropriate component input jacks, then
select Y Cb Cr or Y Pb Pr source input using the Display Panel or Remote Control.
Notice: If the displayed picture appears corrupted, check the cable connection
and DVD output signal setup.
VIDEO INPUT
VIDEO1 R L
VIDEO2 R L
S-VIDEO INPUT
S-VIDEO1 R L
S-VIDEO2 R L
COMPONENT INPUT
Y Cb Cr R/L(480i,576i)
Y Pb Pr R/L(480P,576P,720P,1080i)
7
PC Signal Input Connection（VGA / DVI-D）
PC INPUT
D-SUB AUDIO
DVI INPUT
DVI-D AUDIO
▲ Notice: The highest Resolution input is 1280 X 1024 / 60Hz
If a higher resolution is selected, “signal out of range”
will be displayed on the screen.
8
Some PC models cannot be connected to the set.
Inhaltsverzeichnis
