Operations and Use of Chop Saw
The powerful motor of the Power Miter II Chop Saw is designed to cut hardened lead, zinc, wood, copper
and brass came or framing.
WARNING: This machine is NOT designed for cutting ferrous metals (steel, iron and iron based
metals.) Use this miter saw to cut only thin wood, or soft metals like aluminum, brass or zinc. Other
materials may shatter, bind on the blade, or create other dangers.
A. Cutting Instructions
Initial Setup
come to a complete stop.
Chop Saw Maintenance
To assure chop saw safety and reliability, repairs, maintenance and
adjustments should be performed regularly.
A. Removing and Installing Blade
Place screws and blade cover aside.
new blade with the teeth in a downward position. Please note:
Initial Setup
WARNING: Do not attempt to change the Blade while the Chop Saw
is plugged into the outlet or the blade is running. For best results
use genuine Diamond Tech 4” Power Miter II circular blades.
B. Removing and Installing Blade Drive Belt
remove worn drive belt.
- PAGE 3
Blade
Retaining Nut
Washer
Blade
Drive Belt
Cover
Motor Mount
Bolts
Drive Belt
