DIEBOLD NIXDORF P1200 Bedienungsanleitung

P1200 Standard POS Printer

Thermal Printer

User Manual

01750352498B

Table of Contents

1 MANUFACTURER'S DECLARATION AND APPROVAL .......................................................... 1-1

2 SUPPLIER'S DECLARATION OF CONFORMITY ..................................................................... 2-1

3 SAFETY SUMMARY ................................................................................................................... 3-1

4 IMPORTANT INFORMATION TO THE USER ............................................................................ 4-1

5 UNPACKING ............................................................................................................................... 5-1

6 PRODUCT OVERVIEW............................................................................................................... 6-1

6.1 Introduction ........................................................................................................................6-1

6.2 Features .............................................................................................................................6-1

6.3 Applicable Model................................................................................................................6-2

6.4 Accessories........................................................................................................................6-2

7 SPECIFICATIONS....................................................................................................................... 7-1

7.1 General ..............................................................................................................................7-1

7.2 Environmental usage conditions ........................................................................................7-3

7.3 Internal buffers ...................................................................................................................7-4

7.4 Thermal head basic performance ......................................................................................7-4

7.5 Main Card...........................................................................................................................7-4

7.6 Option Interface Card.........................................................................................................7-5

7.7 Reliability............................................................................................................................7-5

7.8 Options...............................................................................................................................7-6

7.9 Paper Roll ..........................................................................................................................7-7

8 APPEARANCE............................................................................................................................ 8-1

8.1 Front/Rear View .................................................................................................................8-1

8.2 LED and Feed Button.........................................................................................................8-1

8.3 Power Button......................................................................................................................8-2

8.4 Connectors.........................................................................................................................8-3

8.5 Specification of Interface & Power Connector....................................................................8-4

8.5.1 RS232 Interface .................................................................................................. 8-4

8.5.2 Ethernet Interface ............................................................................................... 8-5

8.5.3 Power USB Interface........................................................................................... 8-6

8.5.4 USB Interface...................................................................................................... 8-7

8.5.5 Power Cable Connector...................................................................................... 8-8

8.5.6 Cash Drawer Connector and Pin Assignments................................................... 8-9

9 SET UP PROCEDURE ................................................................................................................ 9-1

9.1 Requirements for Operation...............................................................................................9-1

9.2 Setting up the Printer .........................................................................................................9-3

9.3 Turning off the Printer ........................................................................................................9-4

10 INSTALLATION PROCEDURE................................................................................................... 10-1

10.1 Connecting the Power Cord and Interface Cable...............................................................10-1

10.1.1 Connect to Power Adapter.................................................................................. 10-2

10.1.2 Connect via standard USB Type-B Cable........................................................... 10-2

01750352498B

Table of Contents

10.1.3 Connect via Option Card (RS232 & LAN)........................................................... 10-3

10.1.4 Connect via Y-Cable ........................................................................................... 10-4

10.1.5 Connecting via Cash Drawer .............................................................................. 10-5

10.1.6 Interface cable to POS terminal connection position .......................................... 10-5

10.2 Choosing a Location ..........................................................................................................10-6

10.3 Loading the Paper Roll.......................................................................................................10-9

11 DIAGNOSTICS ............................................................................................................................ 11-1

11.1 Offline Diagnostic ...............................................................................................................11-1

12 GENERAL MAINTENANCE........................................................................................................ 12-1

12.1 Cleaning the Covers...........................................................................................................12-1

12.2 Cleaning the Thermal Print Head.......................................................................................12-1

13 TROUBLESHOOTING ................................................................................................................ 13-1

13.1 Removing Jammed Paper..................................................................................................13-1

13.2 Resetting Cutter Failure or Jam .........................................................................................13-2

13.3 Common Problems & Solutions .........................................................................................13-4

13.4 LED Indication Table..........................................................................................................13-7

14 APPENDIX................................................................................................................................... 14-1

14.1 Ethernet..............................................................................................................................14-1

14.2 Web Setting Page ..............................................................................................................14-1

01750352498B

iii

1 MANUFACTURER'S DECLARATION AND

APPROVAL

WARNING

This is a Class A product. In domestic environment, this product may cause radio interfer-

ence in which user may be required to take adequate measures.

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to cor-

rect the interference at his own expense. Modifications not authorized by the manufacturer may void

users authority to operate this device.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compli-

ance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAN ICES-3 (A)/NMB-3 (A)

The device complies with the requirements of the EEC directive 2014/30/EU with regard

to ‘Electro-magnetic compatibility" and 2014/35/EU “Low Voltage Directive” and RoHS

directive 2011/65/EU.

Therefore, you will find the CE mark on the device or packaging.

In addition, the P1200 has received the cTUVus symbol.

The following information is for EU-member states only:

Disposal of products

(based on EU-Directive 2012/19/EU)

Directive on Waste electrical and electronic equipment – WEEE)

01750352498B

1-1

MANUFACTURER'S DECLARATION AND APPROVAL

The use of the symbol indicates that this product may not be disposed as unsorted munici-

pal waste and has to be collected separately. Integrated batteries and accumulators can be

disposed of with the product. They will be separated at the recycling centers.

The black bar indicates that the product was placed on the market after August 13, 2005.

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environmental and human health, which could otherwise be caused

by inappropriate waste handling of this product.

For more detailed information about the take-back and recycling of this product, please con-

tact your supplier where you purchased this product.

Changes or modifications not expressly approved by the manufacturer for compliance could void the

User’s authority to operate the equipment.

01750352498B

1-2

2 SUPPLIER'S DECLARATION OF

CONFORMITY

Product Description: Thermal Printer

Model: P1200

Party issuing Supplier’s Declaration of Conformity

Diebold Nixdorf Singapore PTE. LTD.

30A Kallang Place

#04-01

Singapore 339213

Phone: +65 6747 3828

Responsible Party – U.S. Contact Information

Diebold Nixdorf

5995 Mayfair Road

N. Canton, OH 44720 / USA

Phone: +1 330 490 5049

FCC Compliance Statement (for products subject to Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

01750352498B

2-1

3 SAFETY SUMMARY

Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions

necessary for safe handling are included in this manual. All warnings and cautions contained in this man-

ual should be read and understood before handling or maintaining the equipment.

Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be recti-

fied using the procedures described in this manual, turn off the power supply, unplug the machine, and

then contact your authorized Diebold Nixdorf representative for assistance.

Meanings of Each Symbol

This symbol indicates warning items (including cautions).

Specific warning contents are drawn inside the symbol.

(The symbol on the left indicates a general caution.)

This symbol indicates prohibited actions (prohibited items).

Specific prohibited contents are drawn inside or near the symbol.

(The symbol on the left indicates “no disassembling”.)

This symbol indicates actions which must be performed.

Specific instructions are drawn inside or near the ● symbol.

(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)

WARNING

This indicates that there is the risk of death or serious injury if the machines are improp-

erly handled contrary to this indication.

Any other than the

specified AC voltage is

prohibited.

Do not use voltages other than the

voltage (AC) specified on the rating

plate, as this may cause fire or

electric shock.

Prohibited Do not plug in or unplug the power cord plug with

wet hands as this may cause electric shock.

If the machines share the same outlet

with any other electrical appliances

which consume large amounts of

power, the voltage will fluctuate widely

each time these appliances operate.

Be sure to provide an exclusive outlet

for the machine as this may cause the

machines to malfunction.

Prohibited

Prohibited Do not place metal objects or water-filled

containers such as flower vases, flower pots or

mugs, etc. on top of the machines. If metal

objects or spilled liquid enter the machines, this

may cause fire or electric shock.

01750352498B

3-1

SAFETY SUMMARY

Prohibited Do not insert or drop metal,

flammable or other foreign objects

into the machines through the

ventilation slits, as this may cause fire

or electric shock.

Prohibited Do not scratch, damage or modify the power

cords. Also, do not place heavy objects on, pull

on, or excessively bend the cords, as this may

cause fire or electrical shock.

Disconnect

the plug.

If the machines are dropped or their

cabinets damaged, first turn off the

power switches and disconnect the

power cord plugs from the outlet,

and then contact your authorized

Diebold Nixdorf representative for

assistance. Continued use of the

machine in that condition may cause

fire or electric shock.

Disconnect

the plug.

Continued use of the machines in an abnormal

condition such as when the machines are

producing smoke or strange smells may cause

fire or electric shock. In these cases,

immediately turn off the power switches and

disconnect the power cord plugs from the outlet.

Then, contact your authorized Diebold Nixdorf

representative for assistance.

Disconnect

the plug.

If foreign objects (metal fragments,

water, and liquids) enter the

machines, first turn off the power

switches and disconnect the power

cord plugs from the outlet, and then

contact your authorized Diebold

Nixdorf representative for assistance.

Continued use of the machine in that

condition may cause fire or electric

shock.

Disconnect

the plug. When unplugging the power cords, be sure to hold

and pull on the plug portion. Pulling on the cord

portion may cut or expose the internal wires and

cause fire or electric shock.

Connect a

grounding wire.

Ensure that the equipment is properly

grounded. Extension cables should

also be grounded. Fire or electric

shock could occur on improperly

grounded equipment.

disassembling. Do not remove covers, repair or modify the

machine by yourself. You may be injured by high

voltage, very hot parts or sharp edges inside the

machine.

CAUTION

This indicates that there is the risk of personal injury or damage to objects if the machines

are improperly handled contrary to this indication.

01750352498B

3-2

SAFETY SUMMARY

Precautions

The following precautions will help to ensure that this machine will continue to function correctly.

• Try to avoid locations that have the following adverse conditions

– Temperatures out of the specification

– Direct sunlight

– High humidity

– Shared power source

– Excessive vibration

– Dust/Gas

• The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild de-

tergent solution. NEVER USE THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic cov-

ers.

• USE ONLY DIEBOLD NIXDORF SPECIFIED paper.

• DO NOT STORE the paper where they might be exposed to direct sunlight, high temperatures, high

humidity, dust, or gas.

• Ensure the printer is operated on a level surface or vertical wall..

• Any data stored in the memory of the printer could be lost during a printer fault.

• Try to avoid using this equipment on the same power supply as high voltage equipment or equipment

likely to cause mains interference.

• Unplug the machine whenever you are working inside it or cleaning it.

• Keep your work environment static free.

• Do not place heavy objects on top of the machines, as these items may become unbalanced and fall

causing injury.

• Do not lean against the machine. It may fall on you and could cause injury.

• Care must be taken not to injure yourself with the printer paper cutter.

• Unplug the machine when it is not used for a long period of time.

01750352498B

3-3

4 IMPORTANT INFORMATION TO THE USER

In order to ensure compliance with the Product Safety, FCC marking requirements, you must use the

power supply, power cord, and interface cable which were shipped with this product or which meet the

following parameters:

Power Adapter

The power adapter is required to comply with the safety and/or EMC requirements depending on the

county where the equipment is used, and to have the following electrical characteristics, Class 1 power

adapter with SELV (Secondary Extra Low Voltage), input rated 100-240 Vac, 2.0A Max, 50/60 Hz, output

rated 24 Vdc, 2.6A.

Interface Cable

You are advised to use a shielded (360 degree) interface cable with this product. The shield must be

connected to the frame or earth ground connection or earth ground reference at BOTH ends of the ca-

ble. If another cable is used than described above you will need to test this cable with the Diebold

Nixdorf printer and your system for local EMC requirements where the equipment is used.

Power Cord

For this product a UL listed, detachable power cord is required. When the power supply is mounted on

the floor, a power cord with Type SJT marking is required. If a power cord is used different from de-

scribed above, you might violate safety certifications which are in force in the country of use. The socket-

outlet needs to be installed near the equipment and must be easily accessible.

Caution Label Information / Informations sur l'étiquette d'avertissement

Hot surface, Do not touch / Surface chaude, Ne pas toucher

Hazardous Moving Parts, Keep Fingers and Other Body Parts Away/ Parties Mobiles Dan-

gereuses Tenir Les Doigts Et Les Autres Parties Du Corps Éloignés.

Power Cord

As the power cord is not supplied with this printer, locally purchase the power cord that meets the follow-

ing standard.

01750352498B

4-1

Andere Handbücher für P1200

Inhaltsverzeichnis

Andere DIEBOLD NIXDORF Drucker Handbücher

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1200 Bedienungsanleitung

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1200 Bedienungsanleitung

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1300 Betriebsanleitung

DIEBOLD NIXDORF

DIEBOLD NIXDORF TH250 Bedienungsanleitung

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1200 Betriebsanleitung

DIEBOLD NIXDORF

DIEBOLD NIXDORF P1300 Bedienungsanleitung

DIEBOLD NIXDORF

DIEBOLD NIXDORF TH210-VI Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung