Digga PDD Bedienungsanleitung
Operator’s Manual
PM-000251
AUGER DRIVES PDD-PD50
(SINGLE & 2 SPEED)
2PM-000251 - Operator’s Manual - PDD-PD50 - June 2022
1Table of Contents............................................................................................................................ 3
2Critical Information - Service Intervals......................................................................................... 4
3 To the Purchaser............................................................................................................................. 5
4Service and Preparation for Use................................................................................................... 6
5Safety Precautions - General Information.................................................................................... 8
6Safety - Working with the Attachment.......................................................................................... 14
7Safety - Decal Labels..................................................................................................................... 17
8Safety - Decal Label Location....................................................................................................... 18
9Before Use....................................................................................................................................... 19
3
1 Table of Contents
10 Commissioning Procedure............................................................................................................ 22
11 Operating Instructions.................................................................................................................... 26
12 2 Speed Installations - Electrics.................................................................................................... 35
13 2 Speed Operating Instructions.................................................................................................... 45
14 Maintenance.................................................................................................................................... 47
15 Spare Parts..................................................................................................................................... 52
16 Troubleshooting.............................................................................................................................. 54
17 Halo Alignment System................................................................................................................. 57
18 Notes: Operator’s Manual.............................................................................................................. 66
Warranty Statement....................................................................................................................... 67
4PM-000251 - Operator’s Manual - PDD-PD50 - June 2022
Your Digga Planetary drive unit is a high performance attachment that is designed for drilling, screw anchoring
(Pier) installation, core barreling and other extreme applications where it is seeing high levels of torque. To avoid
premature wear and failure, and to full your terms of warranty please read this statement.
All Digga Planetary drive units must have a rst oil change within the rst 30 hours (extreme use) or 50
hours (moderate use) or 3 months of use, which ever comes rst to ensure the bed in of the drive unit.
For more detailed information please read the maintenance section of this manual.
If the rst oil change is not performed within this period, excessive wear within the gearbox will occur
that will cause premature failure and all Warranty will be voided.
Oil must then be changed thereafter every 300 hours (extreme use) or 500 hours (moderate use) and
a full service every 12 months must be performed by an authorised service agent to ensure Warranty
requirements are met.
In the event of a failure under the warranty period:
• Contact Digga immediately, do not disassemble your drive without rst obtaining written permission and
instructions from Digga.
• Proof of service must be provided in hard copy form of both operational and service history records
(including serial number of gearbox and hydraulic motor). Service must be performed by an authorised
Digga service agent.
2 Critical Information - Service Intervals
Do not connect or operate your Planetary drive unit without rst having read and understood the following statement.
NOTE
5
Thank you and Congratulations on the purchase of your new Digga Planetary drive unit.
This product was carefully designed and manufactured to give you years of dependable service. It is mandatory
that oil changes are performed at the specied interval to keep it in top working condition (for details see the
maintenance section of this manual).
Before Operation
Inspect the attachment for shipping damage and if any damage does exist, do not operate until the damaged parts
have been replaced or repaired. The primary responsibility for safety with this equipment falls to the operator.
Make sure the equipment is operated only by trained individuals that have read and understood this manual.
If there is any portion of this manual or function you do not understand, contact your local authorized Digga dealer
or the manufacturer to obtain further assistance. Keep this manual available for reference. Provide the manual to
any new owners and/or operators.
About This Manual
This manual has been designed to help you do a better and safer job. Read this manual carefully and become
familiar with its contents before connecting and operating this unit.
Service
Use only manufacturer replacement parts. Substitute parts may not meet the required standards.
3 To The Purchaser
Never allow anyone operate this attachment without reading the “Safety precautions” and “Operating instructions” sections
of this manual. Always choose hard and level ground to park the vehicle on and set the brake, so the unit cannot roll.
CAUTION
!
6PM-000251 - Operator’s Manual - PDD-PD50 - June 2022
During the specied warranty period, your Digga Planetary drive unit is a user non serviceable part and
unauthorised disassembly will void warranty. All service and warranty must be performed by an authorised
Digga service agent. Contact your local Digga dealer for details. To facilitate warranty or service, record the
model and serial number of your unit in the space provided on this page. This information may be obtained from
the identication plate located on the product.
MODELS COVERED IN THIS MANUAL
SINGLE & TWO SPEED PREMIUM DRIVES
PDD, PDX,PDZ, PDZ2, PDZ3, PDX2,
PDX3, DD3, PD3, PDT3
PD4, PD4HF,
PDH Denotes... HALO
PDTH... Denotes 2-SPD with HALO
PDXH... Denotes PDX with HALO Variant
PD5
PD6/PD6HF
PDT6, PDT6HF, PD7
PD8/PD8HF
PDT8, PDT8HF,
PD10/PD10HF
PDT10HF
PD12, PDT12
PD12-5-VIS
PD14,PD15
PD18, PDT18
PD18-5-VIS
PD22,PDT22,
PD25,
PDT25,
PD30, PDT30
PD33-7-VIS
PD40, PDT40, PD50
PDT50
4 Service & Preparation for Use
Model:
Serial Number:
Purchase Date:
The parts department needs this information to ensure accurate parts can be sent to the authorised service agent.
** The DIGGA Serial Tag number is dependant on the region as shown above.
NOTE
DE-000631 MADE IN AUSTRALIA
Name
Serial No.
Flow (max)
Pressure (max)
Model
WeightYr. Manuf.
Digga Australia PTY LTD
4 Octal St, Yatala
QLD 4207 Australia
Approx. Oil Capacity
Power(max) RPM (max)
**DE-000631 for AUS & NZ **DE-000626 for EU & UK
DE-000626 MADE IN AUSTRALIA
Name
Serial No.
Flow (max)
Pressure (max)
Model
WeightYr. Manuf.
Digga Australia PTY LTD
4 Octal St, Yatala
QLD 4207 Australia
Approx. Oil Capacity
Power(max) RPM (max)
7
To avoid any inconvenience before operation, please check that you have received the following items which you
may have ordered. Items may dier depending on type of machine on which the drive units are to be tted to.
REF DESCRIPTION QTY SINGLE
SPEED
2-SPD
12V/24V
AStandard drive unit - or - Swing control sys-
tem drive unit - or - Halo (see chapter 17) 1 • •
B Quick release couplers. Set • •
C Hydraulic hose kit. Set • •
D Lynch pin (clip) or bolt. 1 • •
E Linkage suit standard drive unit. 1 • •
K PIN (Standard drive unit - to - linkage). 1 • •
L Digga motor control harness (3M). 1 N/A •
M Extension harness 3M/6M/12M/15M. 1 N/A Optional
N 2 Speed controller. 1 N/A Optional
O Remote toggle switch. 1 N/A Optional
PRemote oor mounted switch. 1 N/A Optional
Q 12V/24V Power lead. 1 N/A Optional
R Operator’s manual. 1 • •
REF FOR SKID STEER LOADERS QTY SINGLE SPEED
2-SPD
12V/24V
G Slide frame. 1 • •
J Pin (Cradle - to - linkage). 1 • •
F-1 Standard slide cradle. 1 • Optional
F-3 Swing control system cradle (if applicable). 1 • Optional
S Adaptor harness kit CAT/ASV/TEREX. 1 N/A Optional
T Adaptor harness kit (14-Pin). 1 N/A Optional
REF FOR EXCAVATORS QTY SINGLE SPEED
2-SPD
12V/24V
H Standard excavator hitch. 1 • Optional
I Linkage (to suit excavator hitch). 1 • •
F-2 Swing control system cradle (If applicable). 1 • Optional
REF FOR MINI LOADER QTY SINGLE SPEED
2-SPD
12V/24V
U Drive unit with mini loader mount. 1 • N/A
ALL OTHER MACHINES SINGLE SPEED 2-SPD
12V/24V
Custom made frame to suit. • •
*Note: • Denotes supplied.
4 Service & Preparation for Use
A
Q
R
C
B
D
G
U
P
E
D
F-3
F-2
F-1
L
TO
S
M
J
IOR
NK
H
8PM-000251 - Operator’s Manual - PDD-PD50 - June 2022
5 Safety Precautions - General Information
The DANGER designation indicates an imminently hazardous situation that, if not avoided, will result in death.
DANGER
The WARNING designation indicates a potentially hazardous situation that, if not avoided, could result in death or
serious injury.
WARNING
You will also see information called out with the NOTE designation. This additional safety or general information is important
to the maintenance and operation of your loader.
NOTE
The CAUTION designation indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate
injury or property damage.
CAUTION
You must understand all safety statements shown on your attachment and in this manual. Especially note the
information called out by the designations shown below. Follow these safety precautions, when operating or
maintaining the attachment.
During day-to-day operation of your attachment, you will encounter a variety of situations beyond those listed in
this manual. We encourage you to assess the risk present at any job site and in every work task before beginning
work. Apply appropriate risk mitigation strategies to make safety a rst priority at all times, and if these are not
sucient, stop the job and immediately seek the help of a qualied safety consultant.
!
!
!
9
5 Safety Precautions - General Information
Dial Before You Dig
• Service provided in Australia. BeforeUdig is the service provided in New Zealand.
• Never begin work at a new location until the work area has been fully marked for underground
utilities. Buried electrical, telephone, cable wires, gas, water and sewer lines are likely to be present.
Unintentionally disrupting these hidden hazards while working with your loader can result in dangerous
situations and property damage.
• Many countries oer a “dial before you dig” or similar service which advises the location of underground
services in your area. If available also use this service prior to digging, drilling, trenching or any form of
excavating and earthmoving.
You must ensure that underground utilities have been ofcially marked before working in the area. Markings must be valid
according to state law or practice.
CAUTION
Exposure to Respirable Crystalline Silica Dust Along with Other Hazardous Dusts
• It is recommended to use dust suppression, dust collection, and if necessary personal protective
equipment during the operation of this or any other machine attachment that may cause high levels of
dust.
Remove Paint Before Welding or Heating
• Hazardous fumes/dust can be generated when paint is heated by welding, soldering, or using a torch.
Do all work outside or in a well ventilated area and dispose of paint and solvent properly.
• Remove paint before welding or heating. When sanding or grinding paint, avoid breathing the dust. Wear
an approved respirator. If you use solvent or paint stripper, remove stripper with soap and water before
welding. Remove solvent or paint stripper containers and other ammable material from area. Allow
fumes to disperse at least 15 minutes before welding or heating.
!
10 PM-000251 - Operator’s Manual - PDD-PD50 - June 2022
5 Safety Precautions - General Information
End of Life Disposal
• At the completion of the useful life of the Planetary Drive unit, drain all uids and dismantle by separating
the dierent materials (rubber,steel, and plastic etc.). Follow all federal, state and local regulations for
recycling and disposal of the uid and components.
Operating the Planetary Drive
• The primary responsibility for safety with this equipment falls to the operator. Make sure that the
equipment is operated only by trained individuals, who have read and understood this manual.
• An operator must not use drugs or alcohol, which can change his or her alertness or coordination. An
operator taking prescription or over-the-counter drugs should seek medical advice on whether or not he
or she can safely operate the equipment.
• Don’t hurry the learning process or take the unit for granted.
• It is the skill, care, common sense, and good judgement of the operator that will determine how eciently
and safely the job is performed.
• Visually inspect your equipment, ensure correct assembly and installation is done and never operate the
equipment that is not in proper working order.
• Know the capabilities of your equipment and practice its operation to become familiar with the controls,
emergency shut down procedures, and the way it handles on your machine.
• Follow all safety decals and keep them clean. Replace them, If they become worn, damaged or illegible.
• Do not paint over, remove or deface any safety signs or warning decals on your equipment.
• Operate only from the operator’s station and operate only in daylight or with sucient articial light.
• Always carry loads close to the ground and do not exit the machine with the loader arms raised.
• Do not exceed rated operating capacity (ROC) of the host machine, as machine may become unstable
resulting in loss of control. Overloading or exceeding the manufacturers specications will also void all
warranty.
• Remove the Auger drive from the parent machine before transporting to and from the job site.
Andere Handbücher für PDD
1
Dieses Handbuch passt für folgende Modelle
38
Inhaltsverzeichnis
Andere Digga Gleichstromantrieb Handbücher
Beliebte Gleichstromantrieb Handbücher anderer Marken
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Stücklistenhandbuch
Chamberlain Garog
Chamberlain Garog D Series Bedienungsanleitung
Parker
Parker PDS Series Bedienungsanleitung
Festo
Festo DGC G Series Einrichtungshandbuch
Binks
Binks QS-5012-1-CE Bedienungsanleitung
