Digi-tech JamMan Solo Bedienungsanleitung

Owner’s

Manual

Looper/Phrase

Sampler

DECLARATION OF CONFORMITY

Manufacturer’s Name: DigiTech®

Manufacturer’s Address: 8760 S. Sandy Parkway

Sandy, Utah 84070, U.S.A.

declares that the product:

Product name: JamMan Solo

Product option: all (requires Class II power adapter that conforms

to the requirements of EN60065, EN60742, or

equivalent.)

conforms to the following Product Speciﬁcations:

Safety IEC 60065 (7th ed. 2001)

EMC EN 55013 (2001 + A1)

EN 55020 (2007)

Supplementary Information:

The product herewith complies with the requirements of the Low Voltage Directive

2006/95/EC and the EMC Directive 2004/108/EC.

Vice-President of Engineering

8760 S. Sandy Parkway

Sandy, Utah 84070, U.S.A.

Date: January 20, 2010

European Contact: Your local DigiTech Sales and Service Ofﬁce or

Harman Music Group

8760 South Sandy Parkway

Sandy, Utah, 84070 U.S.A.

Ph: (801) 566-8800

Fax: (801) 568-7583

Warning

For your protection, please read the following:

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Do not use this apparatus near water.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including ampli-

ﬁers) that produce heat.

8. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

9. Unplug this apparatus during lightning storms or when

unused for long periods of time.

10. No user serviceable parts inside. Refer all servicing to

qualiﬁed service personnel. Servicing is required when

the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

11. WARNING:To reduce the risk of ﬁre or electric shock,

do not expose this apparatus to rain or moisture.

12. Refer to labels on the unit, including bottom cover, or

other markings and pertinent information.

NOTE:The information contained in this manual is subject to change at any time without notification. Some infor-

mation contained in this manual may also be inaccurate due to undocumented changes in the product or operating

system since this version of the manual was completed.The information contained in this version of the owner’s

manual supersedes all previous versions.

Description of Controls .................2

Setup 1- Amp Input........................8

Setup 2 - Amp Loop .......................9

Setup 3 - MP3/Aux Input ...............10

Using the JamMan®Solo Looper ..11

Select a Memory Location ........................12

Create a Loop (PDL TEMPO LED is

off) ..................................................................13

Create a Loop, with Tempo Count-in

(PDL TEMPO LED is on) ...........................14

Add Overdubs to a Loop ..........................16

Undo/Redo Overdubs................................17

Recording From an MP3 or CD Player..18

Storing Phrases ............................................20

Copy a Loop to a Different Memory

Location.........................................................21

Time Signature.............................................22

Setting a Loop Tempo for Recording......24

Changing Loop Tempo................................25

Pedal Tempo Mode......................................26

Loop / Single Phrases..................................28

Rhythm Type .................................................30

Deleting Individual Loop Phrases ............32

Erase All Loop Phrases (Internal

Memory)........................................................34

Erase All Loop Phrases (SD/SDHC

Memory Card).............................................35

Using Optional SD/SDHC Memory

Cards..............................................................36

Formatting SD Cards..................................38

Unformattted Cards...................................39

Optional FS3X Footswitch........................40

JamManagerTM Librarian Software ...........42

Factory Restore...........................................43

Speciﬁcations..................................44

Warranty

We at DigiTech®are very proud of our products and back up each one we sell with the following

warranty:

1. The warranty registration card must be mailed within ten days after purchase date to validate this

warranty.

2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in mate-

rials and workmanship under normal use and service.

3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that

show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHO-

RIZATION, where all parts and labor will be covered up to a period of one year (this warranty

is extended to a period of six years when the product has been properly registered by mail or

through our website). A Return Authorization number may be obtained from DigiTech by tele-

phone.The company shall not be liable for any consequential damage as a result of the product’s

use in any circuit or assembly.

4. Proof-of-purchase is considered to be the burden of the consumer.

5. DigiTech reserves the right to make changes in design, or make additions to, or improvements

upon this product without incurring any obligation to install the same on products previously

manufactured.

6. The consumer forfeits the beneﬁts of this warranty if the product’s main assembly is opened and

tampered with by anyone other than a certiﬁed DigiTech technician or, if the product is used with

AC voltages outside of the range suggested by the manufacturer.

7. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes

nor authorizes any person to assume any obligation or liability in connection with the sale of this

product. In no event shall DigiTech or its dealers be liable for special or consequential damages or

from any delay in the performance of this warranty due to causes beyond their control.

Congratulations and thank you for purchasing the JamMan® Solo!

Designed for guitarists and bassists who want a full-featured looper in a compact form

factor, The JamMan Solo features 99 internal memory locations that can hold up to 35

minutes of loops, plus an SD memory card expansion slot for another 99 locations that

can store over 16 hours of loops!

The JamMan Solo also has USB connectivity and can sync to DigiTech’s free

JamManagerTM software download that organizes and saves your loops to PC or Mac,

and lets you quickly create JamLists to take to your gig.

The JamMan Solo is the perfect looper/phrase sampler for practicing, composing, and

performing:

Record rhythm loops and solo over them on the ﬂy, completely•

Hands-Free™.

Load up the JamMan with bass lines, drums, harmonies, and more; create an entire•

backup band, take it with you, and perform anywhere!

Slow down or speed up any song without changing pitch.•

10 built-in rhythm (and applause) loops that you can play, edit, delete and restore (via•

the Factory Restore feature).

The JamMan opens up new horizons to your musical explorations.The possibilities are

literally endless, endless, endless...!

Description of Controls 1. Card Memory LED

This red LED lights when you are selecting

loop memories on the optional SD/SDHC

memory card. When this LED is off, loops

are being selected from the JamMan®

Solo’s internal memory.

2. Single LED

This yellow LED indicates the current

phrase memory is set to playback only

once when play is initiated. Single phrases

can be converted to Loop phrases and

vice versa.

3. Loop LED

This green LED indicates the current

phrase memory is set to play back

continuously as a loop when play is

initiated. Loop phrases can be converted

to Single phrases and vice versa.

1 2 3 4 5 6 7 81

4. Display

The main purpose for the Display is to

show the currently selected loop memory

location. It also shows information during

store/copy procedures, setup options, ﬁle

deletion, and card formatting procedures.

5. Power Jack

Connect the included PS200R DC power

supply here. The JamMan®Solo can only

be powered by using the external adapter.

6. Loop Select buttons

The Loop Select buttons are used for

selecting different loop memories and

making selections when in the Setup

menu.

7. Rhythm LED

This red LED will light when selecting the

Rhythm guide track to record and play with.

8.Time Signature LED

This red LED lights when selecting the

Time Signature for a new loop memory

location. You can select from 2 to 15

beats per measure.This means if you

want to record in 5/4 time, select 5 in the

Display. To record in 7/8 time, select 7,

and so forth. Note that Time Signature can

only be changed for a memory location

that has no phrase recorded in it.

9.Auxiliary Input

This 1/8” input accepts a mono or stereo

line level source from a portable CD or

MP3 player. All audio recording at the

Auxiliary input is recorded in mono.

10. Pedal Tempo LED

This red LED lights when Pedal Tempo

Mode is enabled. In Pedal Tempo Mode, any

new loop location can have the tempo set

by tapping the Pedal Switch. Setting Pedal

Tempo Mode is explained on page 26.

11. Rhythm Level

This knob controls the level of the

Rhythm guide track.

12. Input Jack

Connect your guitar to this jack.

13. Store Button

This button is used to store and copy

recorded loops and changes to loop

attributes to the memory card. Pressing

and holding this button will initiate the

deletion of the current loop memory.

Pressing both the Tempo and Store

buttons simultaneously will enter Setup.

14. Status LED

This LED indicates the status during

record, playback, and overdub:

Solid red: Record

Solid green: Play

Solid yellow: Overdub

Flashing red/green: Pedal Tempo

Record Count In

Flashing yellow: Undo/Redo

Flashing red: Clear

15. Footswitch Jack

This jack accommodates the FS3X

footswitch for remotely selecting loop

memories, tapping in the loop tempo, and

undo and clear functions.

16. Pedal Switch

The Pedal Switch is used to start

recording and toggle between playback

and overdubbing.The Pedal Switch can

also be used for tapping in tempo for a

new phrase as well as undo and redo the

last overdub. Pressing the Pedal Switch

two times quickly stops loop playback.

17. USB Jack

The 5-pin mini-B USB jack provides a

connection to a PC or Mac computer for

transferring loop ﬁles to and from the

JamMan®Solo using the JamManagerTM

Loop Librarian software, downloadable at

www.digitech.com.

18.Tempo Button

This button can be pressed multiple

times to set the tempo for a new loop

or change the tempo of an existing loop.

The ﬁrst downbeat of the measure ﬂashes

red and the other beats ﬂash green. If the

tempo for an existing loop is changed, the

loop plays back at the new tempo without

any change of pitch. Pressing and holding

this button will reset any tempo change

applied to an existing loop. Pressing

both the Tempo and Store buttons

simultaneously will enter the Setup menu

to set Rhythm Type,Time Signature, Pedal

Tempo, or Loop/Single phrase status.

19. Output Jack

Connect this output to the input of a

guitar ampliﬁer, channel of a mixer, or pair

of headphones.

20. Loop Level

This knob controls the output level of the

loop phrase.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere digi-tech Musikpedal Handbücher

digi-tech

digi-tech RP14D Bedienungsanleitung

digi-tech

digi-tech HardWire series Bedienungsanleitung

digi-tech

digi-tech HARDWIRE CR-7 Bedienungsanleitung

digi-tech

digi-tech TIME BENDER Bedienungsanleitung

digi-tech

digi-tech RP50 Bedienungsanleitung

digi-tech

digi-tech The Jimi Hendrix Experience Bedienungsanleitung

digi-tech

digi-tech BADMONKEY Bedienungsanleitung

digi-tech

digi-tech Le Lyra Bedienungsanleitung

digi-tech

digi-tech Genesis 3 Bedienungsanleitung

digi-tech

digi-tech PDS1700 Bedienungsanleitung

digi-tech

digi-tech RP80 Bedienungsanleitung

digi-tech

digi-tech BASS MULTI CHORUS Bedienungsanleitung

digi-tech

digi-tech GNX3000 Bedienungsanleitung

digi-tech

digi-tech WEAPON Bedienungsanleitung

digi-tech

digi-tech whammy ricochet Bedienungsanleitung

digi-tech

digi-tech RP100 Bedienungsanleitung

digi-tech

digi-tech Drop Bedienungsanleitung

digi-tech

digi-tech Bass Squeeze Betriebsanleitung

digi-tech

digi-tech RP500 Firmware-Update

digi-tech

digi-tech BP-90 Bedienungsanleitung

digi-tech

digi-tech BASS MULTI CHORUS Bedienungsanleitung

digi-tech

digi-tech Hardwire SC-2 Bedienungsanleitung

digi-tech

digi-tech GSP-21PRO Bedienungsanleitung

digi-tech

digi-tech RP500 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung

BYOC

BYOC Analog Chorus Handbuch

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

digi-tech JamMan Solo Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken