digicon Turnstile Duo Bedienungsanleitung
Product Manual
Turnstile
Duo
Turnstile
Duo
Copyright
All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, translated into any language
or computer language in any electronic, magnetic, optical, chemical, manual way,
or otherwise, without the express written permission from Digicon S.A.
Códe: 069.31.222
Version: 02 - English
Digicon S.A. Electronic Control for Mechanics – 2015
This manual was elaborated by:
Digicon S.A. Electronic Control for Mechanics Documentation Sector - EDS
Turnstile
Duo
1. Important instructions 05...........................................................................................
2. Orientations 06................................................................................................................
3. Introduction 06...............................................................................................................
4. Features of Turnstile Duo 07.....................................................................................
5. Turnstile Duo operation 08.........................................................................................
6. Installing Duo 09............................................................................................................
6.1 Preparing assembly of Duo 09...............................................................................
6.2 Drilling device 10.........................................................................................................
6.3 Lateral assembly with rods or glasses 11..........................................................
6.4 Assembling the arms 12...........................................................................................
6.5 Fixing bearing rods 14..............................................................................................
6.6 Fixing the sides 15......................................................................................................
6.7 Assembling stationery arms 16..............................................................................
6.8 Fixing stationery arm 17..........................................................................................
6.9 Fixing the roof 18........................................................................................................
6.10 Fixing the coverage 19...........................................................................................
6.11 Fitting the pivoting arm 20...................................................................................
6.12 Fitting the lock system 21.....................................................................................
6.13 Cable passage 22.....................................................................................................
6.14 Mounting the card reader bracket 22................................................................
6.15 Turnstile assembled 23...........................................................................................
7. Optional items 23..........................................................................................................
7.1 Power supply 23...........................................................................................................
7.2 ontrol board 24C ..........................................................................................................
7.2.1 Inputs 26....................................................................................................................
7.2.2 Outputs 27.................................................................................................................
7.3 Configuration of control board – switch Ds1 29..............................................
7.4 Examples of configuration 29.................................................................................
7.5 serial communication 30...........................................................................................
7.6 Orientation pictogram kit 31..................................................................................
8. Module 31MCA ...............................................................................................................
8.1 Powering up Duo 32....................................................................................................
8.1.1 Initializing Duo 32.....................................................................................................
8.1.2 Configuring Digicon Firmware 32.....................................................................
9. Maintenance 35..............................................................................................................
9.1 Preventive and corrective maintenance routine 35........................................
9.2 defects, causes, and solutions 37.........................................................................
9.3 Dimensions 38..............................................................................................................
9.4 Other information 40.................................................................................................
10. Warranty and technical assistance 41.................................................................
Contents:
Turnstile
Duo
1. mportant nstructionsI i
You can see, below, the symbols that will appear in this manual,
signaling important moments. It is essential to pay attention to them.
TIP: Indicates something Digicon considers important.
CAUTION: Indicates a moment of extreme caution when
handling the equipment/product
ATTENTION: Indicates a moment when your observation
skills should be extremely productive.
INFORMATION: Presents interesting facts about the
purchased product.
QR CODE: Presents additional information or links
with more details about the presented text.
05
Turnstile
Duo
2. Orientations
Read the information and instructions of this manual carefully, before using the
product. This ensures the correct use of the equipment and maximum use of its
technical features as well as a prolonged service life.
Keep this manual for future consultations.
Digicon reserves its right to alter its products at any moment to adapt them to more
recent technical advancements.
Digicon maintains its right to alter the information contained in this manual without
previous notice.
Digicon does not provide any contractual warranty concerning the information in
this manual, and cannot be held responsible for errors it may contain and problems
due to its use.
The information contained in this manual is exclusive property of Digicon and is
protected by copyright laws.
This manual cannot be reproduced, photocopied or translated, in its entirety or in
part, into any kind of medium, without Digicon's written consent.
3. Introduction
The Full-height turnstile Duo is a bidirectional access control equipment for entrance
and exit of pedestrians. Highly resistant, both indoors and outdoors, it is sturdy, safe,
and firmly fixated to the floor. It is completely integrated to access controllers. This
manual presents a detailed description the installation of Duo and of the components
that accompany it.
To see our complete catalogue, visit www.digicon.com.br.
06
Turnstile
Duo
4. Features of Turnstile Duo
Bidirectional access control equipment for entrance and exit of pedestrians. The double
configuration optimizes the space and facilitates installation.
Highly resistant both indoors and outdoors
Robust, safe, and firmly fixed to the floor.
Complete integration to access controllers.
Two rotating axles with Digicon mechanism and control.
Treatment and finishing hat allow its installation outdoors.
Last arm rubberized with user protection against impact.
Internal lighting.
Gabinet/Coverage
Set of picot f
Roof
Base (floor)
Column
(stationery arm)
Orientation
pictogram (optional)
07
Rubberized arm
(protection against impact)
Turnstile
Duo
5. Turnstile Duo operation
In the basic mechanism, Turnstile Duo has bidirectional motorized turning with two 12 V
electromagnets for activating the locks and two optic sensors that can provide the signal
for activating the electromagnets and to the return of passage.
The electronic model includes a microprocessor control board (optional), where a signal
enabling passage is sent through one of the inputs, depending on the passage direction. If
this signal is recognized, the equipment will allow the turning of the arm of Duo. After half
of the turning is complete (60 degrees), a 400 milliseconds returning signal will be sent,
informing the passage direction. After the signal, the arm cannot be returned to the
previous position.
Depending on the Duo model and configuration, if the passage is forced without the
enabling signal, an electromagnet will be activated to prevent turn. In addition, the
equipment can emit a signal for a sound alarm and/or the exhibition of a red X on the upper
panel display (models with pictogram). In this case, a return signal will be sent, indicating
that the turnstile was forced, informing the direction of turn.
08
Turnstile
Duo
750 (29,527")
362
(14,252")
725 (28,543")
375
(14,763")
725
(28,543")
628
(24,724")
597
(23,503")
Ponto de referência
Centro de giro dos braços do Torniquete
P3
P1
P2 P4
P5
P6
P7
P8
6.Installing Duo
6.1 Prepare the Turnstile assembly
The floor where the turnstile will be fixed must meet the following specifications:
a. Dimensions: Direction of flow 2.4m x columns width 1.4m x concrete height 0.1 m;
b. Necessary height: 2.4 meters;
c. Level the floor for better product performance;
d. Floor specification ( 15 M.P.A. concrete or equivalent);FCK
e. Adequate area for assembling the turnstile: 2.4m x 1.4m x 2.6m.
Power point input and network cable can be on the floor, preferably at point 3 or overhead
pipes.
Obs.: The dimensions of the concrete block and power inputs are only a suggestion. The
client can choose smaller bases (footing) at the fixing points (determined by template).
List of tools for assembling the Turnstile:
1 socket wrench with socket of 14 and 17mm
1 combination wrench 17
1 socket wrench 10 with extension
1 n.3 Allen wrench
INFORMAÇÃO: milimeters andIllustrative image (measures specified in
inches.)
09
1 n. 5 Allen wrench
1 medium-sized Philips screwdriver
1 medium-sized screwdriver
1 hard plastic hammer
1 plum-line or water level
Turnstile
Duo
6.2 Drilling device
a. t will be necessary to add cardboard or bubble wrap under the device so not to damageI
the roof painting when using the drilling demarcations;
b. Screw the device (P1) to the turnstile's roof (P1);
c. osition the assembled parts in the area chosen for installation, observing the flow ofP
entrance and exit;
d. bserve the desired side for the opening (lock side) of the central support forO
maintenance;
e. lace the roof (P1) and fix tem with screw (P2) and nut (P3)P
f. he pre-hole must be done with an Ø6mm drill, so there are no damages to the device'sT
holes;
g. emove the device and drill again all the holes with an Ø14mm drill.R
Quantity of parts used in this stage:
P1 = 2x Roof
P2 = 2x Allen screw M4x12
P4 = 2x Nut M4
Obs.: After all demarcations, disassemble the device to use the part later (P1).
10
P1
P1
P2-P3
P2-P3 Piso
ATTENTION: The place of installation and the direction of entrance and exit
must be defined alongside the responsible for the place.
Turnstile
Duo
Inhaltsverzeichnis
Andere digicon Drehkreuz Handbücher
digicon
digicon CATRAX Plus Bedienungsanleitung
digicon
digicon catrax master Bedienungsanleitung
digicon
digicon dflow Bedienungsanleitung
digicon
digicon dGate UW900 Bedienungsanleitung
digicon
digicon dflow Bedienungsanleitung
digicon
digicon Catrax clip Bedienungsanleitung
digicon
digicon dGate AW Bedienungsanleitung
digicon
digicon CATRAX Plus Bedienungsanleitung
