DigiSpider CNP888 Bedienungsanleitung

CNP888 Network Audio Matrix Processor

Product Manual

The information contained in this manual is subject to modify without notice.

“DS” , “Digispider”, “Dspider” mentioned in this manual all refer to” DigiSpider Inc.

No part of it may be reproduced, transmitted, or translated any language without permission

from DigiSpider Inc.

Trademarks as “DS”, “Digispider”, “ Dspider” used in this manual are registered by DigiSpider

Inc.

Trademarks as “Microsoft”, “MS-DOS”, “Windows”, “Windows 98”, “Windows 2000”, “Windows

XP” are registered by Microsoft Corporation;

Other trademarks and Names mentioned in this manual are belong to the corporation who have

registered the trademark or produced the product. DigiSpider Inc.has no patent right for these

products.

CNP888 Serial

2010 P/N:20101102 Version: 1.6

Thanks for your purchasing CNP888 series Network Audio Processor developed by

our company. Human and high-tech essences are fused in our products. CNP888

series will give you one brand-new application experiences.

Please follow the steps to protect your products, work area and personal safety, in

order to avoid the potential danger of damage.

When you are using CNP888 equipments:

Please follow the steps when you are using CNP888 equipments,

Warning: Don’t operate CNP888 equipments when you demount the

covers (including cover, front panel, and back panel and so on).

zPlease make sure the voltage of the CNP888 according to local AC voltage

standard, in order to avoid to damage CNP888 equipments.

--There are 115V/60Hz in most of countries and districts in South America,

North America and Far East, e.g. Japan, Korea and Taiwan.

--There are 230V/50Hz in most of countries in Europe, Middle East and Far

East.

zPlease make sure the electrical outlet is unplugged before interior setup of

CNP888 equipments, in order to avoid to damage main board of CNP888

equipments. Some main boards are electrified still when the equipment is

plugged.

zInstallation and servicing should be performed by qualified and experienced

personnel.

zPlease make sure all the cables of CNP888 equipments and peripheral

equipment are connected to the correct ground electrical outlets, in order to

avoid electrical shock. All the cables are equipped three-phrase plug to ensure

they are grounded correctly. Don’t use the unidirectional plug and don’t

remove the pins from the cable. Please use three-phrase cable with correct

ground electrical outlet if you need to use extension cords.

www.digispider.net

Don’t use CNP888 equipments in thunderstorm, in order to avoid the potential risk

of electrical shock.

zDon’t connect or disconnect any cable and don’t repair or reconfigure the

product in thunderstorm, in order to avoid the potential risk of electrical

shock.

zPlease make sure the connection of CNP888 equipments and electrical

outlet is severed before cleaning.

zMake sure that CNP888 equipment’s power is off when you clean it. Clean

your CNP888 equipment exterior casing regularly with a soft and dry cloth

or a fluff brush. Do not use liquid or aerosol cleaners which maybe include

caustic or flammable substance.

zWait for a period about ten seconds before severing the connection of

peripheral equipment and CNP888 equipment, in order to avoid damage to

the system board.

zPull out the cable from the network adapter which is on the back of CNP888

equipment first and then pull out the cable from the network hole, in order

to avoid short circuit when you sever the connection. Plug the cable into

network hole first and then plug the cable into network adapter when you

reconnect the products.

zPlease use surge protective device, circuitry adjuster and UPS, in order to

avoid instantaneous high or low voltage damage to CNP888 equipment.

zMake sure there are no goods exert pressure on cables. Do not make cables

exposure, which will cause trample and stumble.

zNever push objects of any kind through openings of CNP888 equipment as

that may cause interior short circuit and result in fire, electric shock, or

other hazards.

zDo not use CNP888 equipment near a source of heat and don’t jam the

refrigeration vent. Don’t make paper underlie CNP888 equipment. Use

CNP888 equipment in ventilated area and don’t locate CNP888 equipment

on bed, sofa or carpet.

zNever spill food or liquid of any kind on the CNP888 equipment.

zDo not use the CNP888 near water or other liquids, or in rainy/moist

situations. If liquid gets into your CNP888, turn it off and take it to your

dealer for inspection.

zWater and/or Moisture Do not use this equipment near water or in contact

with water.

www.digispider.net

Technical instructions

Warning: Perhaps there are some mistakes of description and printing

in technical instructions

zWith the rapid technical development, our products keep on improving and

renewing, so there are may some demoded or useless specifications about

some standards in this manual.

zWe are very conscientious for reorganizing this manual, but we do not

guarantee there is no negligence or mistake in this manual, and we can't

exclude the possibility that this manual will be renewed again. If there are any

revises, we will not give notice any more.

zIf there is any revises in this manual, it will be promulgated in Digispider

Website:http://www.digispider.net

Do not tear up any label

Warning: Please do not voluntarily tear up any label on CNP888

equipment; otherwise it will affect to recognize the standard of product

maintenance deadline.

zAll labels on CNP888 equipment show information when the products are

manufactured and sold, these labels are very important for technology

recognition and maintenance of products.

zAll labels on CNP888 equipment are belonged to recognized standard of

product maintenance deadline. If you voluntarily tear up them, it will affect to

recognize the standard of product maintenance deadline.

www.digispider.net

Looking for help

Warning: Do not attempt to repair this equipment yourself, or it will

damage your equipment and result in serious results, e.g. personal

injury.

zAll CNP888 products are manufactured by DigiSpider Inc.,All maintenance

should be performed only by authorized Units.

zDo not attempt to repair this equipment yourself. Refer all repairs to qualified

service personnel.

zIf there is any question, please contact the dealer you purchased CNP888

equipments from, you also can call Digispider customer service, ask for help.

www.digispider.net

TABLE OF CONTENTS

ABOUT THIS GUIDE..........................................................................................................................i

HOW TO USE THIS MANUAL .................................................................................................i

ANNOUNCEMENT AND PROVISIONS.................................................................................ii

CHAPTER 1 CNP888 SYNOPSIS..............................................................................................1

1.1 THE CNP888 FEATURES...............................................................................................1

1.2 THE CNP888 DSP FUNCATIONS................................................................................1

1.3 FRONT PANEL..................................................................................................................2

1.4 REAR PANEL.....................................................................................................................3

1.5 APPLICATION FIELD......................................................................................................4

CHAPTER 2 TECHNIQUE SPECIFICATION...........................................................................5

2.1 ANALOG INPUT/OUTPUT SPECIFICATION ............................................................5

2.2 INTERFACE SPECIFICATION.....................................................................................5

2.3 OTHER SPECIFICATION...............................................................................................6

2.4 DIMENSION SPECIFICATION.....................................................................................6

CHAPTER 3 BASIC OPERATION..............................................................................................8

3.1 STAND ALONE MODE....................................................................................................8

3.2 NETWORK MODE............................................................................................................9

CHAPTER 4 NSP-100 QUICK START FOR CNP888........................................................... 11

CHAPTER 5 FAQ..........................................................................................................................20

CHAPTER 6 GLOSSARY............................................................................................................21

CHAPTER 7 APPENDIX .............................................................................................................23

www.digispider.net

ABOUT THIS GUIDE

This manual will help you to be acquainted with the products and functions of

CNP888 Network Audio Matrix Processor, by presenting the methods of installation,

configuration, operations and maintenance. If you encounter any problem, or it is

the first time for you to use Digispider’s CNP888 Series, please read this manual

first for relevant information and technical supports. As for its upgrades and

updates, some descriptions and illustrations in the manual may be different with

your hardware. Please visit http://www.digispider.net from time to time for the

latest documentation.

HOW TO USE THIS MANUAL

Read it in any order you like.

You may begin with any page and skip to the desired one. It will surely provide you

with a complete flowchart if you read it from the beginning to the end.

There are Table of Content and Index in the manual, providing different research

methods for various reading habits.

If you encounter any unknown words or expressions, please refer to the attached

“Glossary”.

For the person who use the system for the first times:

We recommend you read all the content of the manual, especially the information

with words of “Note, Caution and Warning”. You are required to operate strictly

according to the prospectuses in the manual.

During the installation of hardware, frequently read the “Safety Guidelines” section

of the manual.

For ordinary users:

As for system administrator and operator, they may read the necessary

information at their own choice. Please refer to the “General description” section of

the manual for specific description. If the manual can't solve the problem, please

contact the technical support personnel and trained & qualified engineers for the

solution.

For experienced and qualified engineers:

For the reason that our products keep on upgrading and updating, please make

attention to the update information of the manual. The specific update information

is easily accessible at the all time on our service and support website, which will be

incorporated into the last version of manual.

www.digispider.net

ANNOUNCEMENT AND PROVISIONS

The manual prepared by Digispider Inc. does not provide any form of guarantee,

clear or implied, including but not limited to, implied guarantees or a

special-purpose commercial reasonableness. In some areas of specific transactions

is a clear or implied guarantees, therefore, this statement may not apply to you.

The manual may contain technical inaccuracies or typographical errors terminology.

Identify changes and updating information regularly updated content will be

updated to version. Digispider Inc may make improvement or updates for the

products and procedures described in this document, at any time as it sees fit.

The manual applies to CNP888 Network Audio Matrix Processor configured with

different channels.

For more technical information, please consult your Digispider Inc sales

representative and retailers.

The usage, reproduction and distribution of this manual are subject to Digispider

Inc’s provisions. Without the prior written permission obtained from Digispider Inc,

this manual shall not be reproduced and distributed.

The power of interpretation of the manual shall be vested in Digispider Inc

www.digispider.net

CHAPTER 1 CNP888 SYNOPSIS

The CNP888 is a 1U CobraNet multipurpose mixing, routing, and processing device

which simultaneously handles up to 8-16 audio channels in a CobraNet network

system. It utilizes a SHARC processor to manipulate audio with 40-bit floating-point

precision using DigiSpider’s NSP-100 software.

1.1 THE CNP888 FEATURES

zPowerful DSP pocessing capability

zGain from 0dB up to +66dB (12 steps) and 48V phantom power individually

selectable for each MIC/Line input.

z8 different DSP preset mode can be selected via the front panel.

zConfigured and controlled by the NSP-100 software using SNMP network

protocol .

zProviding CobraNet port.

zAudio data sharing with: TR2000,TR800,CFM, and the third party standard

CobraNet compliant products.

zThe feedback inhibitor could detect and inhibit the howl frequency automatically

zThe Wise Mixer could automatically modify the ratio of each input channel in the

output mix volume according the different input volumes. The channel which its

input volume is more aloud, its ratio in the mixer output volume is bigger.

1.2 THE CNP888 DSP FUNCATIONS

zDelays: 5ms,10ms,20ms,50ms,100ms.

zLevel control, Compressors, Limiters, Noise Gates, Expanders.

zSignal Generator: Sine, White Noise.

zEQ: Parameter EQ, Graphic EQ.

zFliters: High-pass, Low-pass, Shelf.

zCrossovers: 2-way, 3-way, 4-way.

zLevel Meters:1-channel, 2-channel, 8-channel.

zFeedback inhibitor:4 band; 8 band; 16 band; 32 band;

zWise Mixer: 8x8, 16x16;

www.digispider.net

1.3 FRONT PANEL

The front panel of CNP888 is shown as below

Front Panel of CNP888

1—LCD DISPLAY

Dislay the DSP mode name of the CNP888,and the local analog input/output

setting information.

2—PROGRAM SELECT KNOB

Turn the knob,the LCD will display the DSP mode and the setting information of

the local analog input/output. Push the knob to choose the item you want to

change.

For example,when the LCD displays the DSP mode,the DSP mode No. would be

selected after push the knob,then turn the knob,the DSP mode No. would change,

to choose the needed DSP mode and push the knob,then this DSP mode would be

initiated and run by the CNP888 device.

3—THE INPUT STATUSE INDICATOR LED

The input status indicator LED (green or red),each LED indicate the status of the

corresponding input channel. When the CNP888 is power on，all the led would

flash green once time and red once time.The led would be green when the

corresponding input channel has the normal audio signal input.When the input

signal level below the minimum setting value,the led would be off.When the

input signal level above the maximum setting value,the led would be red.

4—THE OUTPUT STATUSE INDICATOR LED STATUS

The define of the output status indicator LED is as same as the input LED.

3 21

www.digispider.net

Inhaltsverzeichnis

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung