Digital Equipment Pro-face FP2500-T41 Bedienungsanleitung

FP2500-T41

User Manual

Digital Electronics Corporation

FP2500-T41 User Manual i

1) It is forbidden to copy the contents of this manual, in whole or in part, except for

theuser'spersonaluse,withouttheexpresspermissionoftheDigitalElectronics

Corporation of Japan.

2) Theinformationprovidedinthismanualissubjecttochangewithoutnotice.

3) Thismanualhas been writtenwithcareandattention todetail;however,shouldyou

findanyerrorsoromissions,pleasecontactDigitalElectronicsandinformthemof

yourfindings.

4) Pleasebe awarethatDigital Electronicsis notresponsiblefor anydamages result-

ing from the use of our products, regardless of article 3 above.

5) Specificationsset out inthis manual are for overseas products only,and, as aresult,

somedifferencesmayexist betweenthespecficationsgiven hereandtheJapanese

ones.

AllCompany/Manufacturernamesusedin this manualaretheregisteredtrademarksof

theirrespectivecompanies.

<Note>

Preface

Thankyou forpurchasingDigital’sTFT typecolordisplay panel,the 'FP2500-T41'

(hereafter referred to as the FP unit).

TheFP unit isa TFTtype colorliquid crystal displaymonitor forIBM-PC compatible

personalcomputers(VGAmode).

Pleaseread thismanual completely to insure thecorrect useand completeunderstand-

ingofthe FPunit'sfunctions. The FP'sanalog interface isdesigned for usewith

standard VGA mode. Please be aware that this unit may not be able to be connected

with nonstandard VGA modes. For more details, please refer to this manual's "PC

ConnectivityNotes"section.

The term FP2500-T41 refers to the following unit:

FP2500-T41-24V (DC 24V type)

ii FP2500-T41 User Manual

Other Symbols Used In This Manual

The list below describes the symbols used in this manual.

Explains a situation that requires a moderate amount of caution.

Indicates a word or phrase that has an additional explanation.

A reference point. Describes the word or phrase marked by the as-

terisk (*) and the corresponding number.

Reference pages on related topics.

Thismanual describes safetyinstructions for correctuse of the FP unit. Please keep this

manual close at hand, and refer to it when necessary.

The following symbols are used throughout this manual to ensure the safe use of the FP

unit. Pleasemakesuretofollowallinstructionsgivensincetheyexplainimportantsafety

points.

For the Safe And Correct Use of this Unit:

1),2) Operational steps. Please follow these numbered steps in order to

perform the desired operation.

This mark warns of a situation that could either seriously

injure a person or lead to death if the instruction is ignored

and/or the unit is used incorrectly.

This mark warns of a situation that could either injure a

person or damage property if the instruction is ignored and/

or the unit is used incorrectly.

Warning

Caution

FP2500-T41 User Manual iii

Safety Instructions

For the safe use of this unit, be sure to follow these guidelines:

Warning

Because of the ever present danger of electrical shock, be sure to unplug the power cable

fromtheFP unit beforepluggingthe cable's otherendinto thewall.

Donotusepower inexcessofthe unit's specifiedvoltagerangesince itmaycausea fireor

electricshock.

Because the FP unit contains high voltage parts, an electric shock can occur when disas-

semblingtheunit. Therefore,pleasebesuretoalwaysunplugtheunitbeforedisassembling

it.

Donot modify the FPunit in any way,since it maycause a fire or electric shock.

Whenchangingthebacklight,besuretoturnofftheunit'spowerfirst,inordertopreventan

electricshock.

Donotusetouchpanelkeystoperformlife-threateningorvitallyimportantsafetyfunctions.

Useseparate mechanical switchesfor suchkeys.

Ifsubstantialamountsofmetallicdust,waterorliquidsentertheFPunit,turnoffthepower

supplyimmediately, unplugthepowercord,andcontactyour local FPdistributor.

WheninstallingtheFPunit,besuretofollowtheinstructionsgivenin“Chapter3.Installation

andWiring,"toinsureitisdonecorrectly.

Donotusethe FP inanenvironmentwith flammablegassinceitmay causeanexplosion.

iv FP2500-T41 User Manual

Do not press the screen's touch surface too strongly with either your finger or a hard

object, since the touch surface may be damaged.

Whenthesurfaceofthedisplayscreenbecomesdirtyorsmudged,cleanthedisplay with

acloth soaked in a neutral detergent. Donot use paintthinner or organic solvent.

Donot presson the touchpanel's facewith sharpobjects, such asa mechanicalpencil or

screwdriver,since it might damagetheLCDpanel.

AvoidusingorstoringtheFPindirectsunlight,excessivelydustyordirtyenvironments,or

wherechemicals or their vaporsare present inthe air.

AvoidrestrictingtheFP'snaturalventilation,orstoringandusingtheFPinanenvironment

thatwillincreasetheFP'sinternaltemperature.

PleaseavoidusingtheFPinareaswheresudden,largechangesintemperaturemayoccur.

Thesechangescancausecondensationtoforminsidetheunit,possiblycausinganaccident.

TheFP'sLCDcontainsastrong irritant. If thepanelisevercrackedandthe LCD's liquid

contactsyourskin,be suretowashit withrunningwaterfor atleast15minutes. If anyof

thisliquidshouldenteryoureye,besuretoflushtheeyewithrunningwaterformorethan

15minutes, andsee adoctor immediately.

ThecurrentbrightnessoftheLCDscreenwilldependon the screen'scurrentdisplayand

theLCD'scontrastadjustment.Any brightness variationsthatresultarenormal for LCD

displays.

There are minute grid-points on the LCD surface. These points are not defects.

Sometimes crosstalk (shadows appearing on extended display lines) will appear on the

display. This phenomenon is a common attribute of LCD's and is not a defect.

Thedisplayedcolor will lookdifferentwhen viewedfroman angle outsidethespecified

viewangle.Thisisalsonormal.

Displaying a single screen image for long periods of time can cause an afterimage to

remain. To correct this, turn the unit OFF for 5 or 10 minutes, then ON again. This

phenomenonisacommonattributeoftheLCD's,andnotadefect. Topreventthiseffect,

youcan: - use the Display OFF feature, if the same image is to be displayed

for a long period of time.

-changethe screendisplayperiodically to preventthe displaying ofa

single image for along period oftime.

Safety Instructions

For the correct use of this unit, please follow these guidelines:

Notes on the FP's Liquid Crystal Display (LCD)

Caution

FP2500-T41 User Manual v

Table of Contents

Preface ........................................................................................................................i

For the Safe and Correct Use of this Unit..................................................................ii

Warning: Safety Instructions .......................................................................................iii

Caution: Safety Instructions ........................................................................................ iv

Table of Contents ........................................................................................................v

When Connecting to a PC...........................................................................................vii

FP2500-T41 Features..................................................................................................viii

Package Contents ....................................................................................................... ix

UL/c-UL (CSA) Application Notes ...........................................................................x

CE Making Notes........................................................................................................x

Chapter 1—Introduction

1-1 Connecting the FP to a PC .................................................................................. 1-1

1-2 Optional Equipment ...............................................................................................1-2

Chapter 2—Specifications

2-1 General Specifications (For DC24V) ................................................................... 2-1

1 Electrical Specifications ..............................................................................................2-1

2 Environmental Specifications .....................................................................................2-1

3 Structural Specifications.............................................................................................2-2

2-2 Functional Specifications (For DC24V) ..........................................................................2-3

2-3 Interface Specifications (For DC24V) ...........................................................................2-4

1 Analog RGB Interface .................................................................................................2-4

2 Serial Interface ............................................................................................................2-6

3 USB Interface ..............................................................................................................2-7

2-4 Cable Diagrams ...................................................................................................2-8

1 Pin Connections for the RGB Interface Cable............................................................2-8

2 Pin Connections for the SIO Interface Cable .............................................................2-9

3 Pin Connections for the USB Interface Cable ...........................................................2-9

2-5 Names and Functions of FP Parts.............................................................. 2-10

2-6 Flat Panel (FP) Dimensions........................................................................ 2-11

1 ExternalDimensions (DC24V) ............................................................................. 2-11

2 Installation Brackets ........................................................................................... 2-12

3 FP Installation Dimensions ................................................................................. 2-12

vi FP2500-T41 User Manual

Chapter 3—Installation and Wiring

3-1 Installation .................................................................................................................3-1

3-2 Wiring ........................................................................................................................3-5

1 Power Cable Connection ................................................................................................... 3-5

2 Precautions: Connecting the Power Supply...................................................................... 3-6

3 Precautions: Grounding .....................................................................................................3-7

4 Precautions: Input/Output Signal Lines............................................................................ 3-7

3-3 Operation Mode Setup and Display Positioning .......................................................3-8

1 Operation Mode Setup and Adjustment ..............................................................3-8

2 Front LED Option Mode Display .....................................................................................3-9

3 Display Position Compensation by OSD..........................................................................3-10

Chapter 4—Touch Panel Commands

4-1 Command List..........................................................................................................4-1

4-2 Boot-upInitialization ................................................................................................4-2

4-3 Touch Interface Data ..............................................................................................4-3

4-4 Touch Panel Commands..........................................................................................4-5

Chapter 5—Touch Panel Communication Programs

5-1 Bundled Software....................................................................................................5-1

5-2 Operation Environment............................................................................................5-2

5-3 Touch panel Input Drivers .......................................................................................5-3

1 FPATPH.EXE (Touch Panel Handler) ............................................................................... 5-3

2 FPCALIB.EXE (Touch Panel Data Calibration) ................................................................ 5-7

Chapter 6—Troubleshooting

6-1 Troubleshooting........................................................................................................6-1

1 Possible Device Problems ................................................................................................ 6-1

2 No Display ........................................................................................................................ 6-2

3 Touch Panel Does Not Work ............................................................................................ 6-4

Chapter 7—Maintenance

7-1 Regular Cleaning .....................................................................................................7-1

1 Cleaning the Display ........................................................................................................ 7-1

2 Installation Gasket Check/Replacement ........................................................................... 7-1

7-2 Periodic Check Points .............................................................................................7-2

7-3 Replacing the Backlight ...........................................................................................7-3

INDEX.............................................................................................i - iv

FP2500-T41 User Manual vii

• Changeover from horizontal 720 pixels to 640 pixels is done via DIP switch.

• When the horizontal 720 pixel signal is input;

- VGA Graphic & Text mode displays 640 pixels only and 80 pixels are not

displayed.

- VGA Graphic mode displays all pixels but images may be cut off if they do

not match the sampling.

• With vertical 350 pixels, 400 pixels, including 50 pixels at the top and at the

bottom of the screen will be enlarged and displayed at 480 pixels (1.2 times).

• When the unit is used in VGA text mode, the far right side's 80 dots are

not displayed.

• The display mode is designated using dip switch SW1-4.

SometypesofVGAequipmentmaynotbewithintherangesspecifiedabove,and,therefore,

cannot be connected to the FP.

Also, if the user changes his PC's VGA board, there is the possiblity that the new board

may not be able to be connected to the FP.

When Connecting to a PC

The FP unit's analog interface is designed for standard VGA mode. The number of dots

(pixels)displayedareasfollows:

Size H Sync. V Sync. Dot Clock Range

640X480 31.469±1KHz 60±1Hz 25.175MHz±1%

640X400 24.827±1KHz 56±1Hz 21.053MHz±1%

640X400 31.469±1KHz 70±1Hz 25.175MHz±1%

640X350 31.469±1KHz 70±1Hz 25.175MHz±1%

720X400 31.469±1KHz 70±1Hz 28.322MHz±1%

720X350 31.469±1KHz 70±1Hz 28.322MHz±1%

viii FP2500-T41 User Manual

High Quality TFT Color LCD Display

Thisunitis equippedwitha 10.4inchTFT typecolorLCD. Its superiorbrightnessand

wideviewingangle,notfoundinordinarylaptoptypeTFTLCD's,widensyourscopeof

applications.

Thescreen's maximum resolution is 640 x 480pixels, and candisplay 260,000 colors.

Easy Installation In User’s Cabinets and Panels

The FP2500-T41's slim, lightweight, and compact design make installation a snap. It

was designed specifically for use as your IA (Industrial Automation) or OA (Office

Automation)systemmonitor. Theflat,frontpanelprovidesprotectionequivalenttothe

rigorousIP65Fstandard,and,evenwithoutitsoptionalprotectivecover,thefrontpanel

ishighly resistant toboth wateranddust.

Panel can be used as a VGA Display

Since the FP2500-T41 is equipped with an analog RGB interface, it can be connected

to any PC with standard VGA mode. (The PC's clock frequency, however, must be

withinthestandardrange)

Easy to use Built In Touch Panel

TheFP2500-T41'sbuiltintouchpanelisstandardequipment,allowingtouchpaneldata

to be output to a host PC via input/output commands and an RS-232C cable and USB

cable.Thisisperfectforsystemsrequiringbothtouchpaneloperationanddatamonitoring.

FP2500-T41 Features

The features of the FP2500-T41 are as follows.

FP2500-T41 User Manual ix

The FP's packing box contains the items listed below. Please check to be sure each is

includedandis not damaged.

 FP unit (FP2500-T41-24V)  

 

 FP2500/2600

User Manual(Contained in plastic case)

 Installation Gasket (1)  

 

 Installation Brackets (4)

3.5 inch floppy disk  

 

 FP2500-T41/FP2600-T41

(ContainsTouchPanelprograms) Installation Guide (1)

Theseitemshaveallbeencarefullypackedwithspecialattentiontoproductquality.

However, should you find anything damaged or missing, please contact your local

distributor immediately for prompt service.

Package Contents

User Manual

Installation

Guide

Inhaltsverzeichnis

Andere Digital Equipment Industriemonitor Handbücher

Digital Equipment

Digital Equipment FP-2500T Bedienungsanleitung

Beliebte Industriemonitor Handbücher anderer Marken

JUMO

JUMO mTRON T Bedienungsanleitung

SWEDX

SWEDX SWSS156 Bedienungsanleitung

Saia

Saia PCD7.D410VTCF Bedienungsanleitung

weintek

weintek EasyView MT-608S Bedienungsanleitung

Advantech

Advantech FPM-212 Series Bedienungsanleitung

Advantech

Advantech FPM-3191G Series Bedienungsanleitung

Austin Hughes

Austin Hughes RP-F821 Bedienungsanleitung

WAGO

WAGO WAGO-PERSPECTO 762 Series Produkthandbuch

HIS

HIS HIS-ML12-Series D Bedienungsanleitung

Advantech

Advantech IDS-3319 Series Bedienungsanleitung

Acnodes

Acnodes APH 8064 Bedienungsanleitung

Acnodes

Acnodes APW 5400 Bedienungsanleitung

Dynamic Displays

Dynamic Displays QES1500 Progressive Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK Dk3g4PANEL 6153-O/P Bedienungsanleitung

ESA

ESA XM7W7 Bedienungsanleitung

Siemens

Siemens SIMATIC Industrial Flat Panel IFP2200 Bedienungsanleitung

Siemens

Siemens INOX PRO SIMATIC IFP1900 Administratorhandbuch

Advantech

Advantech IDK-1115WP-45FHA1 Bedienungsanleitung