Digital Equipment PRIORIS ZX 6000 MP SERIES Bedienungsanleitung

PRIORIS ZX

6000 MP SERIES

USER’S GUIDE

Prioris ZX 6000MP Series

User’s Guide

Part Number: ER-930WW-UA. A01

Digital Equipment Corporation

July 1996

The information in this document is subject to change without notice and

should not be construed as a commitment by Digital Equipment

Corporation.

Digital Equipment Corporation assumes no responsibility for any errors

that might appear in this document.

The software, if any, described in this document is furnished under a

license and may be used or copied only in accordance with the terms of

such license. No responsibility is assumed for the use or reliability of

software or equipment that is not supplied by Digital Equipment

Corporation or its affiliated companies.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government

is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the

Rights in Technical Data and Computer Software clause at DFARS

252.227-7013.

Prioris ZX 6000MP Series User's Guide

DEC, Prioris, ServerWORKS, and the Digital logo are trademarks of Digital

Equipment Corporation.

Banyan and VINES are registered trademarks of Banyan System Inc.

Intel, OverDrive, and Pentium are registered trademarks of Intel

Corporation.

Logitech is a trademark of LOGITECH, Inc.

Microsoft, MS-DOS, MS OS/2, Windows NT, Windows 95, and Windows

for Workgroups are registered trademarks of Microsoft Corporation.

NeXT is a registered trademark of NeXT, Inc.

Novell and NetWare are U.S. registered trademarks of Novell Inc.

OS/2 and PS/2 are registered trademarks of International Business

Machines Corporation.

PhoenixBIOS is a trademark of Phoenix Technologies Ltd.

SCO UNIX is a trademark of The Santa Cruz Operation, Inc.

SCSI

Select

is a registered trademark of Adaptec Corporation.

SIMM is a registered trademark of Wang Laboratories.

All other trademarks and registered trademarks are the property of their

respective holders.

FCC ID: A09-930WW

The FCC wants you to know...

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation.

Any changes or modifications made to this equipment may void the user's

authority to operate this equipment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and receiver

•Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected

•Consult the dealer or an experienced radio/TV technician for help

All external cables connecting to this basic unit need to be shielded. For

cables connecting to option cards, see the option manual or installation

instructions.

This digital apparatus does not exceed the Class B limits for radio noise

emissions set out in the radio interference regulations of the Canadian

Department of Communications.

This equipment is in the 2nd Class category (information equipment to be

used in a residential area or an adjacent area thereto) and conforms to the

standards set by the Voluntary Control Council For Interference by Data

Processing Equipment and Electronic Office Machines aimed at

preventing radio interference in such residential area.

When used near a radio or TV receiver, it may become the cause of radio

interference.

Read the instructions for correct handling.

This equipment meets or exceeds requirements for safety in the U.S. (UL

1950), Canada (CSA C22.2 No. 950), and Europe (EN 60950/IEC 950)

with Nordic requirements.

This equipment meets or exceeds the ergonomic requirements of ZH1/618

and is certified to bear the GS mark by TUV Rheinland of Germany.

This equipment has been tested for radio frequency emissions and has

been verified to meet VDE 0871 Class B.

Contents

About This Guide

Introduction............................................................................................ ix

Audience ............................................................................................... ix

Support Information............................................................................... x

Organization.......................................................................................... xi

Conventions........................................................................................... xiii

Abbreviations......................................................................................... xiv

Special Notices...................................................................................... xv

Introduction

Reliability/Availability ....................................................................... 1-1

Server Expansion............................................................................ 1-2

Server Management........................................................................ 1-3

Server Security................................................................................ 1-3

Server Software and Documentation...................................................... 1-4

Diagnostic Software............................................................................... 1-5

Server Utilities and Technical Support.................................................... 1-5

Important Ergonomic Information........................................................... 1-6

Contents

Server Utilities

Introduction............................................................................................ 2-1

SCSI

Select

Utility .................................................................................. 2-2

RAID Configuration Utility ...................................................................... 2-2

PHLASH.EXE........................................................................................ 2-3

Using EPP3SMC.EXE........................................................................... 2-3

System Configuration Utility (SCU) ........................................................ 2-4

When to Run the SCU..................................................................... 2-4

Configuring Expansion Boards......................................................... 2-5

Starting the SCU ............................................................................. 2-6

Using the SCU................................................................................. 2-8

SCU Keyboard Function Keys ......................................................... 2-9

Configure Your Computer................................................................ 2-10

Setting the Date and Time............................................................... 2-11

Maintain the System Configuration Diskette..................................... 2-12

Server Components

Introduction............................................................................................ 3-1

Disconnecting External Devices and Power ........................................... 3-2

Removing and Installing the Side Panels ............................................... 3-3

Server Front View.................................................................................. 3-6

Server Left Side View............................................................................ 3-8

Server Right Side View.......................................................................... 3-10

Server Rear View................................................................................... 3-12

Main Logic Board Connectors................................................................ 3-14

Main Logic Board Components.............................................................. 3-16

CPU Module Components and Connectors............................................ 3-18

Tools Needed........................................................................................ 3-20

Static Electricity..................................................................................... 3-20

Replacing the Server Battery/Real Time Clock (RTC) ............................ 3-21

Contents

iii

Server Management

Introduction............................................................................................ 4-1

Managing Your Server........................................................................... 4-1

Obtaining Information about Your Server ............................................... 4-2

Obtaining Information Using the SCU .............................................. 4-4

Obtaining Information Using Server Management Software............. 4-4

Server Status......................................................................................... 4-6

Server Status .................................................................................. 4-7

POST OCP Messages........................................................................... 4-9

POST/Boot Codes........................................................................... 4-9

OCP Messages ..................................................................................... 4-11

OCP Status and Error Messages..................................................... 4-12

Server CPU Voltage and Temperature Ranges...................................... 4-14

CPU Voltage Range ........................................................................ 4-14

VRM Voltage Range........................................................................ 4-15

CPU Temperature Warning Levels .................................................. 4-16

Upgrading Your Server’s CPU Module Configuration

Introduction............................................................................................ 5-1

Configuration Guidelines........................................................................ 5-1

Server CPU Module Configurations........................................................ 5-2

CPU Module Upgrade Configurations..................................................... 5-2

Upgrading to a New CPU Module Configuration..................................... 5-4

Installing Additional Memory

Introduction............................................................................................ 6-1

Server SIMMs Requirements................................................................. 6-2

Memory Configuration Guidelines .......................................................... 6-3

Installing SIMMs (MLB).......................................................................... 6-6

Upgrading Memory ................................................................................ 6-8

Installing SIMMs (Memory Module)........................................................ 6-8

Memory Interleaving Upgrade Path........................................................ 6-12

Supported Memory Configurations......................................................... 6-13

Memory Troubleshooting ....................................................................... 6-14

Contents

Installing Optional Disk and Tape Drives

Introduction............................................................................................ 7-1

Tape Drive Configuration Guidelines...................................................... 7-1

SBB Configuration Guidelines................................................................ 7-1

CD-ROM Drive Configuration Guidelines ............................................... 7-2

SCSI Configuration Guidelines............................................................... 7-2

SCSI ID and Termination................................................................. 7-2

Setting IDs and Termination ............................................................ 7-3

Boot Device..................................................................................... 7-4

External Channel............................................................................. 7-4

Storage Backplane.......................................................................... 7-5

Drive ID........................................................................................... 7-5

Cables............................................................................................. 7-6

Storage Backplane ................................................................................ 7-7

Installing Optional Drives ....................................................................... 7-9

Installing a Half-Height 5¼-Inch Device into the Top-Right Drive Bay .... 7-10

Installing a Full-Height 5¼-Inch Device into the Top-Right Drive Bay..... 7-12

Expansion Brackets................................................................... 7-14

Hot-Swap Drive Bay........................................................................ 7-16

SBB LED Status Indicators........................................................ 7-18

External Storage.................................................................................... 7-20

Connecting an External SCSI Bus to the Storage Backplane........... 7-20

Connecting an External Device to a SCSI Controller........................ 7-22

Installing Expansion Boards

Introduction............................................................................................ 8-1

ISA/EISA Expansion Board Configuration Guidelines............................. 8-1

PCI Expansion Board Configuration Guidelines...................................... 8-2

Configuring Your EISA/PCI Expansion Boards Using the SCU............... 8-3

Identifying the Server Boot Device................................................... 8-4

Server Bus Scan Order ................................................................... 8-4

Examples of EISA/PCI Scan Order.................................................. 8-6

Identifying PCI Devices in the SCU.................................................. 8-8

Contents

Advanced Menu in the SCU............................................................. 8-10

Locking of Resources................................................................ 8-10

View Additional System Information........................................... 8-10

Set Verification Mode Menu....................................................... 8-11

Maintain SCI File Menu............................................................. 8-11

Installing Expansion Boards................................................................... 8-11

Adding ISA Expansion Boards......................................................... 8-12

Installing ISA Expansion Boards...................................................... 8-12

Installing EISA Expansion Boards.................................................... 8-15

Adding EISA Expansion Boards....................................................... 8-16

Installing PCI Expansion Boards...................................................... 8-17

Adding PCI Expansion Boards......................................................... 8-19

Relocating Expansion Boards.......................................................... 8-20

Connecting SCSI and RAID Adapters

Introduction............................................................................................ 9-1

SCSI Configuration Guidelines............................................................... 9-1

RAID Configuration Guidelines............................................................... 9-2

Host Adapter Cable Configurations........................................................ 9-3

Single Channel SCSI Configuration ................................................. 9-3

Two Channel SCSI Configuration .................................................... 9-6

Three Channel SCSI Configuration.................................................. 9-8

Server Security Features

Introduction............................................................................................ 10-1

Left and Right Door Security Lock.......................................................... 10-2

Left and Right Side Panel Lock.............................................................. 10-3

Supervisor Password............................................................................. 10-4

If You Forget Your Password................................................................. 10-5

Additional Security Features .................................................................. 10-6

Inhaltsverzeichnis

Andere Digital Equipment Server Handbücher

Digital Equipment

Digital Equipment 7300 Bedienungsanleitung

Digital Equipment

Digital Equipment MUXserver 100 Bedienungsanleitung

Digital Equipment

Digital Equipment DECserver 90M Bedienungsanleitung

Digital Equipment

Digital Equipment DECserver 900GM Bedienungsanleitung

Digital Equipment

Digital Equipment AlphaServer 8400 Bedienungsanleitung

Digital Equipment

Digital Equipment DECserver 90L Bedienungsanleitung

Digital Equipment

Digital Equipment Prioris HX MP Bedienungsanleitung

Digital Equipment

Digital Equipment Prioris XL 6000 Series Bedienungsanleitung

Digital Equipment

Digital Equipment DECserver 90L+ Bedienungsanleitung

Digital Equipment

Digital Equipment AlphaServer 4000 Bedienungsanleitung

Digital Equipment

Digital Equipment Prioris HX 6000 Bedienungsanleitung

Digital Equipment

Digital Equipment PRIORIS HX Bedienungsanleitung

Digital Equipment

Digital Equipment AlphaServer 1000 Bedienungsanleitung

Digital Equipment

Digital Equipment DECserver 90TL Bedienungsanleitung

Digital Equipment

Digital Equipment MicroVAX 3600 Bedienungsanleitung

Digital Equipment

Digital Equipment Digital AlphaServer 400 Series Bedienungsanleitung

Digital Equipment

Digital Equipment Prioris HX MP Bedienungsanleitung

Digital Equipment

Digital Equipment Prioris MX 6200 Bedienungsanleitung

Digital Equipment

Digital Equipment 5300 Stücklistenhandbuch

Digital Equipment

Digital Equipment Server 3100 series Bedienungsanleitung

Digital Equipment

Digital Equipment 7100R Series Bedienungsanleitung

Digital Equipment

Digital Equipment PRIORIS XL Bedienungsanleitung

Digital Equipment

Digital Equipment PRIORIS ZX Bedienungsanleitung

Digital Equipment

Digital Equipment DECserver 700-08 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung