Digital Equipment GIGAswitch Betriebsanleitung

EK-DGBGZ-IN. A01

DIGITAL GIGAswitch/Ethernet System

Replacing the Fan Tray

Introduction

This document describes how toreplace the fan tray assembly in the GIGAswitch/Ethernet system, and check that

its fans are operational. All fans in the fan tray must be operational to ensure proper cooling in the system. For

informtion about checking the system’s temperature, refer to the DIGITAL GIGAswitch/Ethernet System

Installation and Operation Guide.

Installation Procedure

All GIGAswitch/Ethernet modules are hot swappable. You do not need to shut down the switch when changing the

fan tray. To install a fan tray into the switch chassis, complete the following steps:

DIGITAL, the DIGITAL logo, and GIGAswitch are trademarks of Digital Equipment Corporation.

Step Action

1Carefully remove the fan tray assembly from its packaging.

2Loosen the black captive screws on the currently installed fan tray, then remove the fan tray

assembly from the system.

3Insert the new fan tray into the system as shown below:

4Make sure that the fan tray is seated firmly, with the captive screws tightened.

Verifying the Installation

To verify the installation, complete the following steps:

For More Information

Refer to the DIGITAL GIGAswitch/Ethernet System Installation and Operation Guide for safety, product

specification, and regulatory compliance information. The guide is available in online format on the DIGITAL

GIGAswitch/Ethernet System Information Library CD. This information is also available on the DIGITAL

Network Products Home Page on the World Wide Web at:

North America: http://www.networks.digital.com

Europe: http://www.networks.europe.digital.com

Asia Pacific: http://www.networks.digital.com.au

Step Action

1Launch the web agent. (Refer to the DIGITAL GIGAswitch/Ethernet System Installation and

Operation Guide or Quick Start for details on using the web agent.)

2From the menu on the left side of the web browser, select Cooling System. The display lists the

newly added fan’s status as “Operational.”

Inhaltsverzeichnis

Andere Digital Equipment Schalten Handbücher

Digital Equipment

Digital Equipment MultiSwitch 700 Bedienungsanleitung

Digital Equipment

Digital Equipment EtherWORKS Switch 8T/TX Bedienungs- und Wartungsanleitung

Digital Equipment

Digital Equipment EtherWORKS Switch 6T/2TX Bedienungsanleitung

Digital Equipment

Digital Equipment VNswitch 900EF Bedienungs- und Wartungsanleitung

Digital Equipment

Digital Equipment VNswitch 900EE Bedienungs- und Wartungsanleitung

Digital Equipment

Digital Equipment DEChub ONE Bedienungsanleitung

Digital Equipment

Digital Equipment 624T Bedienungsanleitung

Digital Equipment

Digital Equipment DIGITAL MultiSwitch 600 System Bedienungsanleitung

Digital Equipment

Digital Equipment DECmau 900TL Bedienungsanleitung

Digital Equipment

Digital Equipment DIGITAL MultiSwitch 612EX Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch