Digital Equipment 14BM18 Bedienungsanleitung

FILE NO. SM-CTV-O-158

COLOR TELEVISION

SERVICE MANUAL

MODEL NO. 14BM18

CHASSIS NO. EX-1A3

Please read this manual carefully before service

TABLE OF CONTENTS

SPECIFICATIONS··················································································································1

SAFETY INSTRUCTIONS AND MAINTENANCE········································2

X-RAY RADIATION PRECAUTION ···································································································2

SAFETY PRECAUTION ····················································································································2

PRODUCT SAFETY NOTICE ···········································································································3

SAFETY SYMBOL DESCRIPTION ···································································································3

MAINTENANCE·································································································································4

ADJUSTMENTS······················································································································5

SET-UP ADJUSTMENTS ··················································································································5

CIRCUIT ADJUSTMENTS·················································································································8

STRUCTURE AND CHASSIS FUNCTION DESCRIPTION···············

STRUCTURE BLOCK DIAGRAM···································································································

BLOCK DIAGRAM FOR SUPPLY VOLTAGE SYSTEM·································································

CHASSIS DESCRIPTION···············································································································

SERVICE DATA····················································································································

TECHNICAL DATAOF KEY ICS ····································································································

WAVEFORMS OF KEY POINTS ···································································································· 31

SERVICE DATA OF KEY ICS········································································································· 33

REPLACEMENT OF PARTS ··········································································································

APPENDIX

1. CIRCUIT DIAGRAM

2. PRINTED CIRCUIT BOARD DIAGRAMS

3. FINAL WIRING DIAGRAM

4. FINAL ASSEMBLY DIAGRAM

SERVICE MANUAL

SPECIFICATIONS

Model Number 14BM18

Color system PAL4.43, NTSC3.58, NTSC4.43, SECAM

RF system

Sound system B/G, I, M, D/K

VHF C1 C12 (49.75-85.25MHz, 168.25-216.25MHz)

UHF C13 C57 (471.25-863.25MHz)

Receiving

channel CATV Z1 Z7 (111-167MHz)

Z8 Z35 (223-447MHz)

Programs preset 236(0-235)

Antenna input 75 (unbalanced)

Picture tube (Approx.)

Effective screen dimensions 280 210mm

Audio output (THD 7%) 2W 2

Power source 110-240V ~, 50/60Hz

Weight (Approx.) 10.5kg

Dimensions

(W HD) (Approx.) 416 332 390mm

Rated power consumption 69W

Note: Designs and specifications are subject to change without notice.

SERVICE MANUAL

INSTRUCTIONS FOR SERVICE SAFETY AND MAINTENANCE

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE X-RAY RADIATION PRECAUTION ,

SAFETY PRECAUTION AND PRODUCT SAFETY NOTICE INSTRUCTION BELOW.

X-RAY RADIATION PRECAUTION

1. The EHT must be checked every time the TV is serviced to ensure that the CRT does not emit

X-ray radiation as result of excessive EHT voltage. The maximum EHT voltage permissible in any

operating circumstances must not exceed the rated value. When checking the EHT, use the High

Voltage Check procedure in this manual using an accurate EHT voltmeter.

2. The only source of X-RAY radiation in this TV is the CRT. The TV minimizes X-RAY radiation, which

ensures safety during normal operation. To prevent X-ray radiation, the replacement CRT must be

identical to the original fitted as specified in the parts list.

3. Some components used in this TV have safety related characteristics preventing the CRT from

emitting X-ray radiation. For continued safety, replacement component should be made after

referring the PRODUCT SAFETY NOTICE below.

4. Service and adjustment of the TV may result in changes in the nominal EHT voltage of the CRT

anode. So ensure that the maximum EHT voltage does not exceed the rated value after service

and adjustment.

SAFETY PRECAUTION

WARNING: REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. The TV has a nominal working EHT voltage. Extreme caution should be exercised when working

on the TV with the back removed.

1.1 Do not attempt to service this TV if you are not conversant with the precautions and procedures for

working on high voltage equipment.

1.2 When handling or working on the CRT, always discharge the anode to the TV chassis before

removing the anode cap in case of electric shock.

1.3 The CRT, if broken, will violently expel glass fragments. Use shatterproof goggles and take extreme

care while handling.

1.4 Do not hold the CRT by the neck as this is a very dangerous practice.

2. It is essential that to maintain the safety of the customer all power cord forms be replaced exactly

as supplied from factory.

3. Voltage exists between the hot and cold ground when the TV is in operation. Install a suitable

isolating transformer of beyond rated overall power when servicing or connecting any test

equipment for the sake of safety.

4. When replacing ICs, use specific tools or a static-proof electric iron with small power (below 35W).

SERVICE MANUAL

5. Do not use a magnetized screwdriver when tightening or loosing the deflection yoke assembly to

avoid electronic gun magnetized and decrement in convergence of the CRT.

6. When remounting the TV chassis, ensure that all guard devices, such as nonmetal control buttons,

switch, insulating sleeve, shielding cover, isolating resistors and capacitors, are installed on the

original place.

7. Replace blown fuses within the TV with the fuse specified in the parts list.

8. When replacing wires or components to terminals or tags, wind the leads around the terminal

before soldering. When replacing safety components identified by the international hazard symbols

on the circuit diagram and parts list, it must be the company-approved type and must be mounted

as the original.

9. Keep wires away from high temperature components.

PRODUCT SAFETY NOTICE

CAUTION: FOR YOU PROTECTION, THE FOLLOWING PRODUCT SAFETY NOTICE SHOULD BE

READ CAREFULLY BEFORE OPERATING AND SERVICING THIS TV SET.

1. Many electrical and mechanical components in this chassis have special safety-related

characteristics. These characteristics are often passed unnoticed by a visual inspection and the

X-ray radiation protection afforded by them cannot necessarily be obtained by using replacements

rated at higher voltages or wattage, etc. Components which have these special safety

characteristics in this manual and its supplements are identified by the international hazard

symbols on the circuit diagram and parts list. Before replacing any of these components read the

parts list in this manual carefully. Substitute replacement components which do not have the same

safety characteristics as specified in the parts list may create X-ray radiation.

2. Do not slap or beat the cabinet or CRT, since this may result in fire or explosion.

3. Never allow the TV sharing a plug or socket with other large-power equipment. Doing so may result

in too large load, causing fire.

4. Do not allow anything to rest on or roll over the power cord. Protect the power cord from being

walked on, modified, cut or pinched, particularly at plugs.

5. Do not place any objects, especially heavy objects and lightings, on top of the TV set. Do not install

the TV near any heat sources such as radiators, heat registers, stove, or other apparatus that

produce heat.

6. Service personnel should observe the SAFETY INSTRUCTIONS in this manual during use and

servicing of this TV set. Otherwise, the resulted damage is not protected by the manufacturer.

SAFETY SYMBOL DESCRIPTION

The lightning symbol in the triangle tells you that the voltage inside this product may be

strong enough to cause an electric shock. Extreme caution should be exercised when

SERVICE MANUAL

working on the TV with the back removed.

This is an international hazard symbol, telling you that the components identified by the

symbol have special safety-related characteristics.

FDA

This symbol tells you that the critical components identified by the FDA marking have

special safety-related characteristics.

UL This symbol tells you that the critical components identified by the UL marking have

special safety-related characteristics.

C UL This symbol tells you that the critical components identified by the C-UL marking have

been evaluated to the UL and C-UL standards and have special safety-related

characteristics.

VDE

This symbol tells you that the critical components identified by the VDE marking have

special safety-related characteristics.

MAINTENANCE

1. Install the TV set on a stable and level surface. Do not place the set near or over a radiator or heat

2. Do not install the TV set in a place exposed to rain, water, excessive dust, mechanical vibrations or

impacts.

3. Allow enough space (at least 10cm) between the TV and wall or enclosures for proper ventilation.

4. Slots and openings in the cabinet should never be blocked by clothes or other objects.

5. Please power off the TV set and disconnect it from the wall immediately if any abnormal condition

are met, such as bad smell, belching smoke, sparkling, abnormal sound, no picture/sound/raster.

Hold the plug firmly when disconnecting the power cord.

6. Unplug the TV set from the wall outlet before cleaning or polishing it. Use a dry soft cloth for

cleaning the exterior of the TV set or CRT screen. Do not use liquid cleaners or aerosol cleaners.

SERVICE MANUAL

ADJUSTMENTS

SET-UP ADJUSTMENTS

The following adjustments should be made when a complete realignment is required or a new picture

tube is installed.

Perform the adjustments in the following order:

1. Color purity

2. Convergence

3. White balance

Notes:

The purity/convergence magnet assembly and rubber wedges need mechanical positioning.

For some picture tubes, purity/ convergence adjustments are not required.

1. Color Purity Adjustment

Preparation:

Before starting this adjustment, adjust the vertical sync, horizontal sync, vertical amplitude and

focus.

1.1 Face the TV set north or south.

1.2 Connect the power plug into the wall outlet and turn on the main power switch of the TV set.

1.3 Operate the TV for at least 15 minutes.

1.4 Degauss the TV set using a specific degaussing coil.

1.5 Set the brightness and contrast to maximum.

1.6 Counter clockwise rotate the R/B low brightness potentiometers to the end and rotate the green low

brightness potentiometer to center.

1.7 Receive green raster pattern signals.

1.8 Loosen the clamp screw holding the deflection yoke assembly and slide it forward or backward to

display a vertical green zone on the screen. Rotate and spread the tabs of the purity magnet

around the neck of the CRT until the green zone is located vertically at the center of the screen.

1.9 Slowly move the deflection yoke assembly forward or backward until a uniform green screen is

obtained.

1.10 Tighten the clamp screw of the assembly temporarily. Check purity of the red raster and blue raster

until purities of the three rasters meet the requirement.

SERVICE MANUAL

Fig. 1

2. Convergence Adjustment

Preparation:

Before attempting any convergence adjustment, the TV should be operated for at least 15 minutes.

2.1 Center convergence adjustment

2.1.1 Receive dot pattern.

2.1.2 Adjust the brightness/contrast controls to obtain a sharp picture.

2.1.3 Adjust two tabs of the 4-pole magnet to change the angle between them and red and blue

vertical lines are superimposed each other on the center of the screen.

2.1.4 Turn both tabs at the same time keeping the angle constant to superimpose red and blue

horizontal on the center of the screen.

2.1.5 Adjust two tabs of the 6-pole magnet to superimpose red/blue line and green line.

2.1.6 Remember red and blue movement. Repeat steps2.1.3-2..1.5 until optimal convergence is

Deflection Coil

Dummy Wedge

Rubber Wedge

Adhesive

Deflection Yoke

Purity/Convergence

net Module

Glass Cloth Tapes

6-pole Magnet

ust the An

(

Vertical Lines

)

Fixed

Rotate Two Tabs At the

Same Time

(

Horizontal Lines

)

Adjustment of Magnets

Purity Magnet

Conver

ence Ma

net Assembl

4-pole Magnet

Fig. 2

SERVICE MANUAL

Incline the Yoke up (or down) Incline the Yoke Right(or left)

Circumference Convergence by DEF Yoke

Fig. 3

obtained.

2.2 Circumference convergence adjustment

2.2.1 Loosen the clamp screw holding the deflection yoke assembly and allow it tilting.

2.2.2 Temporarily put the first wedge between the picture tube and deflection yoke assembly. Move

front of the deflection yoke up or down to obtain better convergence in circumference. Push the

mounted wedge in to fix the yoke temporarily.

2.2.3 Put the second wedge into bottom.

2.2.4 Move front of the deflection yoke to the left or right to obtain better convergence in

circumference.

2.2.5 Fix the deflection yoke position and put the third wedge in either upper space. Fasten the

deflection yoke assembly on the picture tube.

2.2.6 Detach the temporarily mounted wedge and put it in either upper space. Fasten the deflection

yoke assembly on the picture tube.

2.2.7 After fastening the three wedges, recheck overall convergence and ensure to get optimal

convergence. Tighten the lamp screw holding the deflection yoke assembly.

3. White Balance Adjustment

Generally, white balance adjustment is made with professional equipment. It’s not practical to get

good white balance only through manual adjustment. For TVs with I2C bus control, change the bus

data to adjust white balance.

BLU Red Red/BLU

BLU

Red

4-pole Magnet Movement 6-pole Magne

Movement

Red/BL

SERVICE MANUAL

CIRCUIT ADJUSTMENTS

Preparation:

Circuit adjustments should be made only after completion of set-up adjustments.

Circuit adjustments can be performed using the adjustable components inside the TV set. For TVs with

I2C bus control, first change the bus data.

1. Degaussing

A degaussing coil is built inside he TV set. Each time the TV is powered on, the degaussing coil will

automatically degauss the TV. If the TV is magnetized by external strong magnetic field, causing

color spot on the screen, use a specific degausser to demagnetize the TV in the following ways.

Otherwise, color distortion will be shown on the screen.

1.1 Power on the TV set and operate it for at least 15 minutes.

1.2 Receive red full-field pattern.

1.3 Power on the specific degausser and face it to the TV screen.

1.4 Turn on the degausser. Slowly move it around the screen and slowly take it away from the TV.

1.5 Repeat the above steps until the TV is degaussed completely.

2. Supply Voltage Adjustment

Caution: +B voltage has close relation to high voltage. To prevent X-ray radiation, set +B voltage to

the rated voltage.

2.1 Make sure that the supply voltage is within the range of the rated value.

2.2 Connect a digital voltmeter to the +B voltage output terminal of the TV set. Power on the TV and set

the brightness and sub-brightness to minimum.

2.3 Regulate voltage adjustment components on the power PCB to make the voltmeter read 115±1V.

3. High Voltage Inspection

Caution: No high voltage adjustment components inside the chassis. Please perform high voltage

inspection in the following ways.

3.1 Connect a precise static high voltmeter to the second anode (inside the high voltage cap) of the

picture tube.

3.2 Plug in the supply socket (110-240V, AC, 50/60Hz) and turn on the TV. Set the brightness and

contrast to minimum (0 A).

3.3 The high voltage reading should be less than the EHT limitation.

3.4 Change the brightness from minimum to maximum, and ensure high voltage not beyond the

limitation in any case.

Nominal EHT voltage: 22 1.3KV Limited EHT voltage: 25KV

4. Focus Adjustment

Caution: Dangerously high voltages are present inside the TV. Extreme caution should be

exercised when working on the TV with the back removed.

4.1 After removing the back cover, look for the FBT on the main PCB. There should be a FCB on the

Inhaltsverzeichnis

Andere Digital Equipment Fernseher Handbücher

Digital Equipment

Digital Equipment 21BM18 Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Philips

Philips Colour Television Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung