Getting Started Guide (continued)
Menu Functions
Before setting any menu functions, please make sure the device is
connected correctly and receiving power. The monitor must be powered
ON and receiving a signal before you can use the onscreen display (OSD)
menu functions. Press the MODE button on the front of the unit to switch
the display to your active signal source (HDMI/YPbPr/VIDEO). You can then
press the MENU button to access the OSD. Use the up and down arrow
keys to choose from COLOR, MENU, FUNCTION or SOUND menu options
in main menu. Press the left or right arrow keys to confirm your selection
and then choose your desired adjustment option by pressing the up or down
arrow keys. Next, use the left or right arrow keys to adjust the value or
select an adjustment option. Press the MENU key to exit.
1. Color Menu Settings
Brightness: To adjust the image’s brightness
Contrast: To adjust the brightest to darkest ratio of the image
Tint: In composite video mode, this is used to adjust the NTSC color signal
Saturation: To adjust the color saturation in the image
Color Temp: Use this adjustment to alter the color temperature of the image
to one of the following presets: User, 6500K, 7500K, 9300K. If User preset is
selected, use the up and down arrow keys to select Red (R), Green (G) or B
(Blue) and then adjust the value to your requirements using the left and right
arrow keys.
2. OSD Menu Settings
Language: Choose from English, German, Korean, Spanish, Italian, French,
Japanese, Chinese, Korean, Russian
H Position: To adjust the OSD position horizontally
V Position: To adjust the OSD position vertically
OSD Timeout: This timer setting controls the amount of time the menu pop-up
screen will stay on screen without any user input before disappearing
Transparent: To adjust transparency of the Menu
3. Function Menu Settings
Reset: Resets system parameters and settings to original factory settings
Display Ratio: To choose the aspect ratio - 16:9 or 4:3
Finder Frame: Picture framing marker options including 80%, 85%, 90%,
93%, 96% & OFF
LR: To flip image left to right (horizontally)
UD: To flip image up and down (vertically)
4. Sound Menu
Volume: To adjust the
volume
1
2
3
4
Troubleshooting
For any problems using the unit, first consult these troubleshooting tips.
Problem #1: Picture is appearing only in black and white
Possible Solution #1: Please check saturation, brightness, and contrast
adjustments to make sure they are set properly. Also make sure the Color
setting in the Function menu is set to full color saturation and try again.
Problem #2: There is NO picture after turning on the power.
Possible Solution #2: Check the input signal cable connection and make sure
the battery or AC power connections are seated properly on the back of the
monitor and then try again.
Problem #3: Image color is distorted or abnormal, eg. lacking in some color
Possible Solution #3: Please check the input signal cable connection to
make sure it is correct. If the cable is damaged or loose, it can cause poor
signal transfer, resulting in image color distortion.
Problem #4: The unit will not power on when using battery power source.
Possible Solution #4: The battery needs to be charged or is bad. Please
change the battery and try again.
Problem #5: Any other abnormal image display
Possible Solution #5: Please try entering the OSD Function Menu and
selecting “reset” to return all system parameters and settings to original
factory settings.
www.digitaljuice.com
